Printable View
I was hoping someone knows where to get a striker protrusion gauge for my No. 1 Mk. III rifles or if one can be made at home. I would imagine it has a max and min. notch in it. Looking through Skennerton's book it looks like a combo tool has a striker gauge on it. One of those would be great also. Any help would be appreciated.
The minimum is .040 and maximum .050.
I found a photo of one in my files, poster of photo not saved. Looks to me a person that was handy could make one.
Attachment 21099Attachment 21100Attachment 21101
Would those tolerances also apply to a No.4 MKI ?
Thnx.
Ian
Yes. I own a No. 4 gauge and it is marked for .040 to .050Quote:
Originally Posted by ickmann
Burgie - that was the one I soldQuote:
Originally Posted by burgie
Anyone know of any good sources for a stripping tool? The only source I found was "The Gunner" in the U.K. I would try try to make one, but don't have anything to copy . Would anyone out there be willing to send me a trace out, rough pattern of the pieces and include measurements so I could at least get a rough model made. I can always re-fine and finish to specs. if it works out, I can always make more. Either a No.1 or a No. 4, I'm not picky.
Thnx.
Ian
Dont know how common these are
You can get a variety of military specification Armourers tools from Arrowmark Tool & Gauge Pty Ltd. in Australia. The website is: Arrowmark Tool . It's excellent quality stuff.
ickmann, there was a drawing in and old NRA magazine that I copied. Will post a photo of the firing pin tool if that is what you want.
If you do make one, just make sure that the tangs that unscrew the striker are TOUGH. Not just case hardened but TOUGH steel. If not, they'll shear off and that's when the big problems can really start.
And I know it's pretty obvious, but we've all done it............... don't forget to unscrew the screw, striker in the cocking piece