I need the leather replaced on my M1A1 stock metal. Who does this work? Also need a new butt plate spring. Your assistance is appreciated.
Printable View
I need the leather replaced on my M1A1 stock metal. Who does this work? Also need a new butt plate spring. Your assistance is appreciated.
Ron Auck used to advertise on E bay. His e mail is: ron43056@yahoo.com. hope that this helps you.Quote:
Originally Posted by KEN
Thanks for tip! It's a start.Quote:
Originally Posted by messina
Anybody else?? I tried contacting Ron Auck with no response. In addition to the butt plate spring, I also need a cover plate and tension screw. Any help is greatly appreciated.
There's a guy on eBay from France that has some USGI parts for those, I believe. I got a bolt tool pawl from him and it was OK. I do see that he has some questionable slings now, though. Here's a link to one of his auctions: http://www.ebay.com/itm/M1-CARBINE-M...5#ht_577wt_777 - Also, you might check with SARCO, but not sure if their stuff is repro or not? - Bob
I have the proper rivet squeezer sets for the semi tubuar rivets. If you round up the components, I reckon we can put it together.
https://www.milsurps.com/images/impo..._zpsd24a-1.jpg
Might even use the old WWII Vultee factory pnuematic squeezer!
If it's not real expensive, round up TWO sets of leather and rivets. It might be a good time to remove old Mr. Lamar's name and social that's cut into the pad.
https://www.milsurps.com/images/impo...tuff0041-1.jpg
Heard you got some good trading fodder along with the stock!
You can call or e-mail (David Turley) turleydavid@hotmail.com ( UT) or 801-787-7374 it may cost about a hundred bucks. He does leather and rivets for the m1a1....
The seller in France who USGI listed the link to on Ebay, looks like he has the spring and the rest of the parts you need for your M1A1 stock.
I have some brack shoe rivets marking 7/4 if you need. I think some were used on the leather.
https://www.milsurps.com/images/impo...IMG_1772-1.jpg
L&S Supply... Mr Roger Larson