for $539.95.It looks has stock has been coated with a gloss coat.I am thinking of buying it.
Printable View
for $539.95.It looks has stock has been coated with a gloss coat.I am thinking of buying it.
F4dphantomII,
I live about 12 miles east of Lansing, in Williamston.
See if they'll let you take the stock off for inspection.
I just heard about a Saginaw from up that way that has a cracked gas piston...that's very bad news.
Look that Saginaw over closely for any import markings on the barrel or the rear right side of the receiver. Really even if a import for that kinda $$ it's gotta be worth the price, unless the receiver has been cut in two and rewelded....look closely. If so it's only worth the sum of the other parts.
Any idea of the serial # range?
Did you notice if it had the late features like a bayonet band and adj rear sight?
Any markings in the slingwell or on the right rear side of the stock?
Just wondering if it's a Hi-wood or low-wood stock vs a M2 potbelly stock.
As far as the gloss on the stock.....you can always strip off the top coat.
Feel free to ask more questions if needed. If not let us know how it goes.
Good Luck
Charlie-painter777
Yes it has late features bayonet lug,adj.rear sight looks like no potbelly stock though.It was locked in rack so I didn't have a chance to look it over yet.It is in Davison at Williams gun sight.
Do like Charlie suggests.It could be a real find or a good find at that price or junk, then walk away.:wave:
Aha, another Phantom Phreak. Carbines too; it doesn't get any better.
Mike
Forgive my ignorance but can the gas piston be replaced?Or would you have to replace the whole barrell assembly?
i live in the 6th largest city . ive been to 15 gun shops ,and only found one,an imported mixmaster,in extremly rough shape fo $950 firm
sheesh!
whatsamatta with you guys?
...
http://www.thecmp.org/images/m1carbines.jpg
...
M1 Carbine
...
The one I had heard about had the gas cylinder cracked. Not the piston. I should have been more clear. A piston can be replaced. It might need a new nut and the threads reamed but a cracked cylinder is a questionable fix.
Regards
Charlie-painter777
Thanks Charlie I'll check it out closely.
And if they won't let you check it, then walk on by.
Update I stopped at shop friday and the Saginaw M1 Carbine was gone so I couldn't check it out further.
Williams is the best gun shop/store in Flint. They will move on their prices. Every rifle I ever bought from them was clean and at a fair price. Good to see someone else from Flint on this board. Now I need to pick me up a Big John's steak and onion!
ummmmmmmmmmmmmmmm Big Johns steak and onion in Homer Simpson voice or a Haloburger