happy owner I am !

So, I took my M1 today for its first shoot since...last year (shhhht). I have rebarreled it with a 1943 SA barrel I bought from a member of this board 5 or 6 years ago and I am still happy with this rifle. I got 1,5" inch groups at 100 meters using hand loaded ammunitions.

Getting the rifle zeroed was an exciting adventure...so much different from my issued FN FNC ! As 100 meters is a little under 300 yards, the elevation knob is in an intermediate position, somewhere between 200 & 300.

Next projects:
-putting nm sights on it.
-building a .22LR training rifle out of a demilled receiver (3 on hands) & a relined barrel I plan to buy from numrich.


Ask me about a single 25yrs old nco with way too much free time...

Gabriel.Tu as besoin de CHERCHEZ LES FEMMES.

Salut,

John R.

des femmes & des munitions !

I need ammo...more ammo to feed the old warhorse !

John, how are you ? hope you're fine !

Recherche d'abord les munitions, qui est moins cherchez les femmes. Mon français est si mauvais. Apologize my poor french, it is much worse than my english and that is not the best. Gabriel do you build the .22 by yourself ( complete ) or is there an kit to buy ?

Regards

Gunner

Gunner,

Your french is surely far better than my non-existent German (twenty words at all).

I plan to build it using a demilled receiver that I rewelded. The barrel will be a cluncker grade from Sarco or Numrich relined with a .22 liner, but with an extension bringing the chamber at +/- the front locking lugs level.

By milling a new bolt and modifying a demilled operating rod, I think it would be possible to built a blow-back M1 using .22lr Ruger handgun.

For the ammo, I must go out to buy powder & bullets : only 100 bullets left and maybe 150 grams of powder.

Gabriel, that sounds very interesting. Is it possible for you to tell me how it works and, if you want to, to send a few pics of your work ? My french is only good enough to order my dinner at a restaurant. I wasnt the best at school in that case. Where do you buy powder and so? Here in Germany the prices seems getting higher every months. The most things i order at Hunting Sport in Luxembourg. Good dealer good prices.

Regards

Gunner

My French is a bit rusty... but isn't "Cherchez les femme" a phrase that roughly
translates to "whenever a man is in trouble, a woman will somehow be at the root
of the problem". Maybe that should be "Cherchez la femme".

Anyway, good to hear from Gabriel again.

Gabriel, 100 meters is not a little under 300 yards. It is 328 feet, or 107 yards. Additionally, the drop form 100 to 200 yards for .30-06 is about 2 inches (168gr, HPBT with Vo=2700 fps). So that means a difference on target of about 1/8" (3,5mm plus bas) if you just set for 100yards. It's a different story at longer distances.

I am presently working on loads for my International Harvester (1955) with help of chronograph and scope. Will keep you informed if you're interested.

Thanks for all the kind replies I got !

Cherchez les femmes can be translated as "Look for women".

As for powder, I buy those from Freylinger near Luxembourg or Lengele near Charleroi. For sure, Hunting Sport is a truly good shop but a bit far for me....and I don't shoot that much.

I will probably begin my conversion in October (as the bathroom will be completed, my machine shop will quickly follow). I will take pics and draw blueprints that I will post here. M1 Garand life will be longer if we share our knowledges.

And for the history buffs, I will not slaughter original components...I will use left-over from previous M1 Garand slaughtering program.

Great to hear from our Belgian comrade!

"the drop from 100 to 200 yards for .30-06 is about 2 inches (168gr, HPBT with Vo=2700 fps)"

The drop is more like 4 inches. (Two clicks up from your 100 yard (or meter) setting.

Gabriel,
It can be done, I like to use a solid 22 barrel with parts of an original barrel attached.
https://www.milsurps.com/images/imported/deleted.gif[/IMG]

TRS4923,

I like your build. I think to build something very close to your output. What parts of the original barrel are you using ? receiver & muzzle ends I suppose ?
For your bolt, did you use the M1 Rifle bolt patern shortened ?


Outstanding work !

Gabriel

Gabriel,
I make my own bolt, you can get an idea of how I did it by the pictures below.
https://www.milsurps.com/images/imported/deleted.gif[/IMG]
https://www.milsurps.com/images/imported/deleted.gif[/IMG]

Many thanks for the pics.