new guy needs help from the brain trust

Printable View

10-31-2009, 05:01 PM
pale rider

3 Attachment(s)

new guy needs help from the brain trust

Hello all,new guy first time poster here:beerchug: Just made a trade for my first m1 carbine,got it for a worn Makarov my buddie had to have :D hope I did ok. Anywhoos what I got is a winchester receiver # 12992## with what appers to be a winchester barrel it has a W stamped a few inches below the front site.The rest of the parts are a mix,trigger houseing is stamped ST and trigger parts are a mix and the slide is rock ola.The stock that came with this was a after market fajen and its got to go!What I am wondering is if its worth restoring or if I should just find a proper stock and barrel band and call it good.
10-31-2009, 05:08 PM
Bill Hollinger

Looks like you have a typical rebuild and yes, you did okay! I would be interested, as would all here, in seeing more detailed pictures of the barrel band and trigger housing. The reason for the barrel band is because in it appearance, it looks like a type two band. They are rare.

Put a stock on it and shoot it. Have fun with the old girl.

Welcome aboard!
10-31-2009, 05:43 PM
pale rider

1 Attachment(s)

Thanks Bill.................thats what I was thinking..hoping as I enjoy shooting milsurps.Here is a pic of the barrel band its stamped KI,I think it may have been worked over by bubba when it was sporterised.
10-31-2009, 06:24 PM
Bill Hollinger

It has Pale Rider. It is a type III with the lug cut off.
10-31-2009, 08:35 PM
painter777

AM I seeing a doglegg hammer?

Yes....he did well.

Charlie-painter777
11-01-2009, 02:27 PM
pale rider

2 Attachment(s)

pics of trigger housing
11-01-2009, 09:09 PM
jimb16

Looks like an early Underwood dogleg to me.....
11-02-2009, 09:32 AM
painter777

Pale Rider,
That .U. marked dogleg hammer would bring $200+.
If your plan is to use this carbine as a shooter a flat type III hammer would give you a easier pull.
The funds from the sale of the dogleg would go a long way toward a stock for you.

As far as a complete rebuild/restoration....These early issue carbines cost big bucks to try to restore.

Cheers
Charlie-painter777
11-02-2009, 01:02 PM
pale rider

WOW 200 bucks! If some one wants trade for a stock a hammer and type III barrel band that would work for me :super: boy howdy I only paid 150 for the makarov that I traded! Not looking for a fancy stock just a nice shooter grade. Thanks for the good news Gentlemen! :dancingbanana:
11-02-2009, 01:06 PM
imarangemaster

I would be happy to do that trade, dogleg for the stock, straight hammer and band, but seriously, you can do better selling it. I have a used Inland Type III band I would left go reasonable.

Actually. I want to keep my WW2 stock, but I still have a type III Inland band reasonable if interested. (I think it is "IS" or "SI")
11-02-2009, 02:06 PM
INLAND44

Say, why do you want a Type III band anyway? Planning on getting a bayonet to go with it? In fact, for a shooter, I don't see any reason to change the existing band at all. Its a G.I. band and it probably looks and fits fine. The remaining stub of the cut off bayo lug extension doesn't really matter. If you consider trading the hammer for an excellent stock, I'm sure you'll get plenty of takers. Changing the barrel band is a big job because the front sight has to be taken off and put back on. However, if you want to make it a more legitimate rebuild, yes, you would need a Type III band, but it wouldn't matter which maker. A JMQ/EMQ was one of the most used. Just make sure whatever you get has a sling loop on it.
11-02-2009, 03:03 PM
pale rider

My dad carried a carbine in korea was a morter man with the 45th ID and I think it would be nice to have it set up close to what he was issued and get a bayo.Think he would get a kick out of it.