I have a L1A1 about to be welded up as a dewat for my canadian 80's era jeep but first i want to put a C1A1 dust cover on it. All other changes can be made after the dewating.any one know a source for a C1A1 dust cover in Cadada?
Printable View
I have a L1A1 about to be welded up as a dewat for my canadian 80's era jeep but first i want to put a C1A1 dust cover on it. All other changes can be made after the dewating.any one know a source for a C1A1 dust cover in Cadada?
The C1A1 dust cover is unique to FAL. For it has a stripper clip guide. I used one on my C2A2 semi auto build. Gary
Yes I know, sleep with a C1A1 from 1983 till 1987 when I was orderd to give it up and take a C7.
I'm looking for that dust cover so my soon to be dewated L1A1 will look right to the great unwashed at military jeep shows.
C1A1 has nothing to do with FAL. FAL is metric and the other is inch. Try Gun Parts Corp and see if they can help. There are so many versions out there now that you make them in the U.S. you have to be careful what you ask the dealer for. You could try Collector Source or Marstar since I see you are in Canada.
One on Gun Broker now.
dont see it.Quote:
Originally Posted by limpetmine
Marstar is out of stock I will try gun broker and collectol source. thanks
try to locate one in canada if not then you should check with CFC before you import parts for a prohib. i dont think its importable.Quote:
Originally Posted by my72jeep
Thanks for the advice I kind of was looking only in canada, I once tryed to buy a colt scope for my AR what a experince that was.Quote:
Originally Posted by sandstorm
Bump:
Still looking for a canadian FN dust cover.
Have you advertised in WTB on this forum? The other source in Wheaty on this forum, he's into that sort of thing and might have a spare. Or know of one, PM him.
Ok I'll try that.
if you dont have any luck then send me a PM , i have two of them .
Sandstorm PM inbound.
Get a hold of FNC1 over on CGN. He will have them, although likely at US prices.
I have a small collection of C1/C2 parts including covers. Marstar price is $ 20.00 which is OK with me, plus shipping. Regards.
what other C1A1 parts do you have?
Attachment 33539DSA makes an "inch" clip guide type L1A1 dust cover. I am not sure if they function, or just for 'looks'...
Thanks Tom but I have one now .
Thanks every one for your help.:cheers:
Ok I have one this post is done. Thanks