Stevens parts?

Hello all,
Anyone have any idea where I can find a trench variation of a stock for either a Stevens 520 or 620? Also, if anyone knows of anyone with an ordinance marked receiver for either I would be interested. I'm building here and thus far I have a barrel. Have to start somewhere! Rome wasn't built in a day and it was surely one stone at a time. Right now I'm gathering stones. :D Heading down to the big show in Louisville this weekend to do some digging if I can get away from my table long enough to go scavenging. Thanks all!

Numrich used to have the butt stock w/sling swivel & recoil pad for the M77E

i have a US marked 520 trench gun reciver id sell.

Give Simpson's in Galesburg Il a call. They used to have 520 riot and trench butt stocks.

They are on the web.

Mark

Ended up getting a stock from Simpson's. It's a bit rough but truth be told not much worse that anything else I already own. It's an honest, real stock with some honest real use. Thanks for the advice!

Hello again all,
First of all Chuck, thanks for the parts, looks great and matches well! I am still looking for some other parts if anyone has any ideas or spares laying around they'd like to part with. I am looking for a magazine nut for my Stevens 520. Also, I don't have a heat shield either (I know, hardy har har). not holding my breath (or wallet) for an original but I was thinking about one of the replicas that is made by East Taylor LLC. Any opinions on these? I know they are in the white, does anyone know how to make it look correct? This gun project is for me, not a resale. I'm not trying to dupe anybody, I just want an authentic looking finish on the heat shield and bayo lug, especially the purplish tint. I know, I don't ask for much do I? : ) Thanks for all of the help so far everyone! By the way, any parts need to not be blued, I prefer something with some honest wear on it. Thanks again!

well,
lets see, i have a new unissued forend tube still in the grease,
the repro heatshields are nice, however, you would have to have it anodized to get the plumb color, hard to do anymore,
you can however send it to me, and have it parkerized to match the reciever that you got from me..
as the originals were blued anyway, and the reciever you have is parkerized, and likely been through the rebuild program.
not sure what you meen {nut} they had a endcap that was attached to the barrel with a screw, and the tube moved to allow for takedown.

I wasn't sure what the part in question was called until I saw it listed on a parts list as the "magazine nut". But the part in question is the one that the mag tube threads into and locks into the receiver (opposite of the plug) Since my last post I actually found one. Still waiting on the outcome as to whether or not the guy who has it is parting with it or not. Should know in a few days. As for the mag tube, what kind of finish is on it? You know exactly what the receiver looks like that I am trying to match it to so what do you think?
As for the heat shield, I want to explore it a little more but I may take you up on that. Thanks again!

my tube is a new in the grease item, and blued as well.
the item your looking for might be the locking ring.

Ah yes, the locking ring. That would be a sensible name for it. I appreciate the offer on the tube but I'm looking for something that's a little more aged. By the way, once I got the receiver cleaned up the crack wasn't anywhere near as bad as it originally looked, so I thank you again for that.

Ok all, my Stevens parts quest has taken a turn. I've been scouring the web, all of my usual haunts as well as some new territory and I'm not having any luck. I need a full trigger assembly and internals for a Stevens 520A. I bought a trigger assembly but turns out it was for an older Stevens 520, with the safety next to the trigger. It appears to be "mostly complete" (I think). If anyone has a correct one and needs what I have I'd be happy to swap. I also have a complete bolt but it looks like it's been completely stripped and polished, as well as the lifter. I don't want any of this stuff so like I said, I'm looking for trades for honest, aged parts for my project. If anyone knows a good site where I can find some of this stuff (without nickel and diming me to death for individual parts) I'd be appreciative for the info! Thanks again everyone!

Quote:

---

Originally Posted by nhetzer

Also, I don't have a heat shield either (I know, hardy har har). not holding my breath (or wallet) for an original

---

I know this comes many months after your request I just joined. I have an original heat shield for sale. At Ohio Prices!

PM me with your asking price if you don't mind. : ) thanks for chiming in!


---
I am here: Google Maps

I hear nhetzer recieved and was happy with his. I recieved his second one yesterday and installed it on my 520-30 trench last night. Fits fine and looks good. I thank polartrill and would not hesitate to do business with him again.
Chris

Agreed. I'd do business with him anytime. Really nice guy and most certainly not one of the many pirates out there who would jump at the opportunity to rake you over the coals. I highly recommend him if anyone is considering working with him.


---
I am here: Google Maps