Printable View
Guys, would like to know if the barrel could possibly be original to this 4.2 million Springfield. It was purchased from CMP as a USGI rack grade 5-6 years ago. Also, what would be the correct stock?
https://www.milsurps.com/images/impo...standard-7.jpg
https://www.milsurps.com/images/impo...standard-8.jpg
From the barrel targeting and proof marks, absolutely! By 11-53 the DAS cartouche use was well under way. Good looking, original finish rifle. :thup:Quote:
Originally Posted by dbarn
Heat lot A44A? :)
Thank you sir. At the time I was hoping for a luck of the draw WWII rack grade. Back then you could reasonably expect an original finish rifle. Was pleasantly surprised to get the 4.2 with most of all it's original Springfield parts. Have seen previous post about the barrel dates having a pretty good range. This barrel matches the condition of the rifle with strongs lands and grooves and just a hint of frosting. It's proven to be an excellent shooter. It came with a very good condition birch replacement stock with a very tight lock up. I would like to find the correct stock. Is there a posibility of it have a SA/JLG? I'm thinking the DAS is more likely and probable for 11-53 as you say, and do not want to use a JLG if it would not be correct.
Probably not. The transition occurred in full late Summer - early Fall 1953 and obviously it couldn't have been assembled before the barrel date. By about 9 or 10 - 53, the transition was about complete. There are always overlaps but 11-53 is quite definitive.Quote:
Originally Posted by dbarn
You have saved some time and $$. Thanks again! Considering the cost was $350 plus shipping it's been the best rifle buy I will ever make. Now to find a matching, dark finished USGI DAS stock with a little character.
Ramboueille - could you explain the sequence of the three "P" proof marks and punch mark. I know that one "P" is applied when the barrel is proofed alone, the punch when the barrel is proofed after being assembled. When are the other two "P" s applied ???? :dunno: :bash: Thanks, Joe
I'm also curious to know what MD37 represents. thanks.
That would be the heat lot numberQuote:
Originally Posted by dbarn
DBarn, little character DAS? If you are refering to the 3/8" DAS, only HRA used that one. All Springfield Armory rifles that used the DAS cartouche used the 1/2". Hope this helps...Quote:
Originally Posted by dbarn
Duplicate...
I Have A 4.3 From Cmp About 7-8 Years Ago And Every Part Correct It Cam With A "jlg" Stock , I Think That Is The Best Choice!-------randell
If I may ask, what is your barrel date? 4.2's seem to be all over the chart.Quote:
Originally Posted by Rgarand
Hey Kenny, just referring to have a few dings and dents or having that "been there/done that" look.Quote:
Originally Posted by Phrogpilot
Oh, gotcha...Hahaha, its all about where you put the "inflection"...lolQuote:
Originally Posted by dbarn