Printable View
There's a copy of a De Lisle Carbine for sale on the weapons guild. It's not supressed. Made by Prexis in Arizona. Does anyone have experiance with these?
Does it look "correct"? Or does it look longer than the original De Lisle?
Attachment 36505
Attachment 36504
These guns were made up by Valkyrie as far as I know, and are pretty close to correct looking. I think they also make(or made) a surpressed version.
I'm always suprised that noone has made a copy of the folding butt version, using a standard, readily available folding Sterling L2A2 or L2A3 butt
Actually it looks shorter. Rear sight is in a different location and front handguard is shaped different.
The length from the bolt face to the end of the suppressor is 18 1/2 inches on my VA DeLisle. The suppressor body itself is 16" So with 2 1/2 of the barrel in the action the fake suppressor can be a little more than 13 1/2" long and still cover the legal 16" barrel. So the over all length would be around 33 1/2" compared to my DeLisles' 36"
Note my rifle has the long stock.
Attachment 36517
I thought about it, but cannot bring myself to drill into the receiver to attach the stock and I'm not a stock maker so the pistol grip looks like it would be a challenge to make and fit.Quote:
Originally Posted by Peter Laidler
At one time Valkyrie Arms was going to make a few of the para prototypes, but I don't think it ever came to be.
I,ve had the folding butt and looked at all ways to build a De-Lisle , but to build an exact replica (in the UK) its a section 5, to build it any other way to me is defeating the object, because the whole De-Lisle part is the supressor, its just too short to comply with our rules.Quote:
Originally Posted by Peter Laidler
Are these 45 ACP?
Yes. The are chambered for .45 ACP and used Colt 1911 pistol magazines.
Is prexis still in business? How do they mark their arms and where are the markings? I have a replica without any markings and wonder if it is one of theirs.
Never mind--dummy just found them.
The De Lisle Carbine eh, that brings back some memories. When our Government considered us to be a little, but not a lot, more trustworthy than they do now I used to own a De-Lisle replica that was a take down and fitted into a briefcase. Sadly as you rightly say it would fall foul of the reclassification and would most definitely be S5. She's probably a manhole cover or something similar these days but fortunately for me I sold her on before 1996, can you believe it's been 16 years since we lost pistols?, so didn't have to hand her over for destruction.Quote:
Originally Posted by bigduke6
I wonder if I've got any old pics kicking around? If I have they'll be on the old fashioned film and negative stuff for sure, still at least it's not glass plate negative.
Cheers,
Simon.
I thought if the silencer was integral to the weapon then it would count as part of the barrel and therefore not be S5?Quote:
Originally Posted by Simon
The barrel on a De-Lisle is 8 1/2", so too short for the UK, you could as you say make the silencer as part of the barrel, but then you could not strip it down to clean, to go to the trouble to produce an exact replica you would want to strip it down, plus I doubt the felt that linned the inside of the silencer tube would last that long so would need replacing and I cant remember if the folding stock variant would take the total length under 24" ?Quote:
Originally Posted by Dr. Strangelove
Very easy to build a replica to comply with our rules, but it just wouldnt be a De-Lisle.
https://www.milsurps.com/images/impo...DSCF3426-1.jpg
And, where can you find a Lanchester Mk.1 rear sight ??? The copies all use the SMLE rear sight. Anyone with a Lanchester they are stripping for parts as a museum I know is looking for an ORIGINAL Mk.1 select fire trigger group.
The very best reproductions of which I am aware have been made by a chap who has posted at weaponsguild and CGN under the board name "mudpuppy". His use a full length barrel inside the casing, of course, to comply with Canadian law.