Printable View
Here in CT we are burdened with new laws regarding "assault weapons". This makes an M1 attractive as it is not classified as an AW. I would like to barrel one in .264 Winchester. The advantage of the .264 is lighter recoil, heavier barrel walls, good bullet options.... all add up to a more viable round to shoot in National Match courses. Anyone have a barrel to sell or know where I can find one? Thanks
I think you'll find that one will be a custom...
try Krieger they do custom work.
.264 Win Mag???Quote:
Originally Posted by cobramech
Or .284 Winchester? Which would make the rifle a single shot without special clips as the body diameter is larger than the rim.
I would think .280 Rem/7mm Express would be easier, except for the need to keep port ressure under control.
Maybe .260 Remington?
Bartlein barrels may do it but they are not cheap I got my 22/250 barrel some years ago with a 1/12 twist and that was $750.oo Au unfitted but believe me they are well made and superbly accurate they can also do a gain twist as well but that is extra.
I think it might work with only 7 rounds per clip...but the bolt face would also have to be altered, so it's academic.Quote:
Originally Posted by jmoore
Two suggestions:
This is a C&P from another forum, but Roland has a solid gold rep for smithing M1/M1A's.
This gent. used to offer barrels or could build M1s in a variety of calibers, 22-250 was one of the oddest . Might want to give him a try.
Roland Beaver -- Former Marine Corps Match Armorer, Distinguished Master Rifleman, offers only the best in accurizing, rebarreling, refinishing of M1/M1A rifles. Roland Beaver, 1127 Hwy. 64 E, Bald Knob, AR 72010. (501) 724-6388.
The other likely candidate is Gene Barnett. He made the barrel on my M14NM back in my rifle team days and he made the 308 barrel currently on one of my M1's. Gene also makes the "Fulton Armory" branded barrels. Haven't a clue on how to contact him though.
Report back if you have any luck.
OP was last on the 19th...seems to have lost interest...
Some years back, before Richard McCann (of McCann Industries, which has managed to stay in business) died, he offered a "Magnumized" M1. .338 and .458 Winchester Magnum chamberings, IIRC. So opening the bolt face isn't an insurmountable problem.Quote:
Originally Posted by browningautorifle
But the rebated rim on the .284 Winchester or one of it's 6,5mm offshoots seems to be a bigger problem as there would be no good retention in the clips.
I know bolt faces can be opened up, the M1 carbine has been changed to 9mm on occasion...I guess it would just need the right cutter. I'd think the M1 bolt would be pretty hard to mill. The lack of clip retention might not be as serious as that because it isn't going to war, unless you think they'll creep forward during firing and jam things up?
Just a SWAG but, yes. Misfeed, something, esp. as the case is so much shorter than 30-06.Quote:
Originally Posted by browningautorifle
I have two M1s in 270, which does not seen that much different from 264. They do have less recoil and with a little more metal in the barrel, maybe a little more accurate. I purchased one new from Springfield Inc. (Special Order) about thirty years ago and I bought a 270 barrel from Gun Parts and had it put on a 9m/m barrel which was on a Blue Sky in the early 90's.
You know what a 9m/m barrel is? It is a barrel that will take a 9m/m round to the case at the muzzle.
If you were going for accuracy what about 280AI? Lots of people seem to be using it for long range bolt action builds.
Pretty funny...not very accurate. Guess it would be broadside at the muzzle...Quote:
Originally Posted by Bubba-7