Jungle carbines are LOUD...

... at least that is what my wife said when I touched mine off behind the house a short time ago. :) If I can get the ole girl to shoot the way I need and in a safe condition... she should be a real interesting piece on the line at Camp Perry this August. :madsmile:

I have a FMP marked BSA No5 Mk I, that I was test firing behind the house earlier. I didn't want the hassle of cleaning up after using corrosive ammo, so I grabbed a box of Sellier Bellot (180gr FMJ) I had purchased awhile back at a local shop. I fired eight rounds... I had a couple of cratered primers, and then everything looked good, nice dented primers, then on the eighth shot... WOW... the ole girl kicked like a mule... boogered up my thumb... and when I looked at the case, the primer had backed out a tad with a small puncture.

I'm not sure whether it's a headspace issue, or if the ammo is the issue. Some rounds kick... some don't... very inconsistant. Has anyone else used or had issues w/ S&B ammo in the green box w/ a gold end?

Any suggestions are appreciated... Thank You!

"THIS WE'LL DEFEND!"

"...she should be a real interesting piece on the line at Camp Perry this August."

Yep....everybody LOVES a points-feeder! At least folks will know you're there.....more damn flash and noise than anything not crew-served and on tracks!

more damn flash and noise than anything not crew-served and on tracks!

Albanian 7.62 x 54R in an M-44 Mosin Nagant is impressive, too. :rofl: Carl

I would first get the headspace checked.

Lou

[QUOTE=

Albanian 7.62 x 54R in an M-44 Mosin Nagant is impressive, too. :rofl: Carl[/QUOTE]

Yep.....the only one that gives the No.5 a run for it's money in the "Sturm und drang" department!

The only "Field Gauge" for the .303 I have on hand is a Brownells model which measures at .070. My bolt will close on this guage. I added a shim bringing the gauge to .072, and my bolt will not close on it now. I am of the understanding the the standard military fail measurement is .074. Am I correct? Is there a chance that the factory loads are hot, or should I look somewhere else for a problem? No out of the ordinary stretch of cases ect... just the puctured primer on the one case.

"THIS WE'LL DEFEND!"

I´b be a bit worried if mine did that. Definitely needs looking into.

If you think the No5 is loud, NEVER shoot a Swedish mouser carbine!:yikes:

oney, I just checked a pile of S&B 180 gr. emptys. All were fired through one rifle and there are a few primers more deeply struck than the majority. While firing there were no 'memorable' rounds. Another pile of UMC emptys, fired at the same time, same rifle were all normal.

Firing pin protusion should be .045", IIRC (I'll be corrected if wrong) and with one well worn Long Branch I had to round off the firing pin's tip as it was piercing primers.

A No.5 at Camp Perry? Sounds like fun.

Brad

This one barks a good bit louder than my #5 rifles! .308 Win with 20" barrel and a healthy dose of Reloder 15 under a 165 gr. slug. Of course .308 Win. operates at a good bit higher chamber pressure than .303 so I might be comparing apples to oranges.https://www.milsurps.com/images/impo...08Mauser-1.jpg

For my money the Princess Juliana Carbine wins the prize (I've got No.5's and M38s and M44s). 8mm mauser out of an 18" tube. Guaranteed to clear the adjacent 3 shooting position on either side of you at the range.
Wish I still had mine.

Not mine but a good pic.
Queen Juliana of the Netherlands Carbine - Firearms and ordnance - WW2 militaria collectors-War relics forum. Uniforms, Guns, helmets, battlefield archeology - WW2 militaria collectors-War relics forum. Uniforms, Guns, helmets, battlefield archeology</a></blockquote> </div> </li>  <li class="postbit blockbody" id="post_12"> <div class="header"> <div class="datetime">03-05-2009, 10:46 AM</div> <span class="username">villiers</span> </div> <div class="content"> <blockquote class="restore">No louder´n my Gebirgsjäger Mauser 33/40 (or any other short military carbine).</blockquote> </div> </li>  <li class="postbit blockbody" id="post_13"> <div class="header"> <div class="datetime">03-05-2009, 01:27 PM</div> <span class="username">John Sukey (Deceased)</span> </div> <div class="content"> <blockquote class="restore">I heard of one mouser carbine that was actualy REJECTED by the german cavalry because the barrel was so short that the noise was deafening.</blockquote> </div> </li>  <li class="postbit blockbody" id="post_14"> <div class="header"> <div class="datetime">03-05-2009, 03:37 PM</div> <span class="username">The Cruel Conservative</span> </div> <div class="content"> <blockquote class="restore">Beat me to it. I was going to mention the FR-8 as a louder-than-necessary rifle. Ditto the FR-7 and since it's a small-ring Mauser shooting 7.62NATO, it requires a good bit more chutzpah. ;)<br /> <br /> Other flash-bang rifles in my collection include the 1891 Argentine Engineers Carbine and Artillery Carbine -- 7.65x53 Mauser is ballistically equivelent to the .303 Mk.VII -- and my 1873 Seargent's Carbine .45-70Gov't. Though, it's more of a big boom than a sharp crack. With "authentic" ammo it puts out a nice puff of sulphury cloud. :)<br /> <br /> Gunzup!</blockquote> </div> </li>  <li class="postbit blockbody" id="post_15"> <div class="header"> <div class="datetime">03-05-2009, 03:45 PM</div> <span class="username">Old Schoolr</span> </div> <div class="content"> <blockquote class="restore">At some point in time didn't the army issue .45-70 ammo w/ a lighter bullet for use in the carbines?<br /> I saw someone firing a very short Mauser at the range which to me looked like a shorter version of the Yugos that Dunham's sells. The barrel was probably 18". The blast was bad even 4 or 5 benches down the line w/ my muffs on. The owner was hammering the bolt open w/ the palm of his hand. Not my idea of fun.</blockquote> </div> </li>  <li class="postbit blockbody" id="post_16"> <div class="header"> <div class="datetime">03-05-2009, 07:27 PM</div> <span class="username">steved409</span> </div> <div class="content"> <blockquote class="restore">Yes, the official trapdoor carbine round was .45/55 and a lighter weight bullet, but can't remember weight right off the top of my head---thinking somewhere around 400 gr.</blockquote> </div> </li>  <li class="postbit blockbody" id="post_17"> <div class="header"> <div class="datetime">03-05-2009, 10:09 PM</div> <span class="username">krinko</span> </div> <div class="content"> <blockquote class="restore">What do you know of pain?<br /> Paper-thin 16 3/4" barrel and 230grain Balle N.<br /> -----krinko</blockquote> </div> </li>  <li class="postbit blockbody" id="post_18"> <div class="header"> <div class="datetime">03-05-2009, 10:42 PM</div> <span class="username">Parashooter</span> </div> <div class="content"> <blockquote class="restore">Ouch! Balle N is bad enough in my full-size Mle. 86/93. Makes the No.5 seem like a kitten-pat by comparison. Can't imagine it in a midget Berthier.</blockquote> </div> </li>  <li class="postbit blockbody" id="post_19"> <div class="header"> <div class="datetime">03-06-2009, 07:11 AM</div> <span class="username">John Kepler</span> </div> <div class="content"> <blockquote class="restore">Yeah....that Berthier Carbine is another "rifleman's friend". I've fired mine exactly ONCE.....that was plenty! But then, I never expect much out of either a French car or French firearm!</blockquote> </div> </li>  <li class="postbit blockbody" id="post_20"> <div class="header"> <div class="datetime">03-06-2009, 12:35 PM</div> <span class="username">Peter Laidler</span> </div> <div class="content"> <blockquote class="restore">They recoil too. I know I've mentioned this before, but when the press, bless 'em, were at Warminster for a demonstration of the new shorty/carbine version of the SA80..., for shortarses and tank crews etc, we laid on a bit of a shoot for them. On the line-up was the usual showing of carbines. From a Sten gun, M1 .30 carbine, M4 carbine etc etc and at the end of the line, another little short carbine with a flash eliminator.<br /> <br /> They all took their places and passed along the line, shooting quite merrily at the little friendly targets with the little friendly carbines. That is until one little girly press lady got her hands on the No5 and fired it at the target. The rifle ROARED, the flash exploded from the muzzle as it recoiled back. Well, she was told to grip it tight and hold on but it did buck and recoil a tad more than she expected, specially after the M1 carbine<br /> <br /> Now I've been in the Army, and an Armourer for just a couple of years but that day I learned a few more 'appropriate' words. A good time was had by all. We still chuckle about it today</blockquote> </div> </li>  <li class="postbit blockbody" id="post_21"> <div class="header"> <div class="datetime">03-07-2009, 12:47 PM</div> <span class="username">Jim K</span> </div> <div class="content"> <blockquote class="restore">Around 50 years ago, I fired my first No.5. The owner had removed the flash hider, and it was late afternoon, getting dark. I touched off a round of cordite ammo and the result was a blue, purple, yellow, orange, and red ball a good three feet in diameter and (from later observations) almost five feet long. <br /> <br /> That, dear reader, is when I figured out that the flash hider is not intended to keep the enemy from seeing your muzzle flash, but to keep you from being blinded by it. (The doctor says I will probably get my sight and hearing back any time now.)<br /> <br /> Jim</blockquote> </div> </li>  <li class="postbit blockbody" id="post_22"> <div class="header"> <div class="datetime">03-07-2009, 04:41 PM</div> <span class="username">Patrick Chadwick</span> </div> <div class="title">No. 5 myths</div> <div class="content"> <blockquote class="restore">There are two obviously ineradicable myths concerning the No. 5, which are passed on endlessly by people who just do not know what they are talking about.<br /> <br /> The first is, of course the flash hider. I don't know or care who was the first twit who proposed that the flash hider was to hide the muzzle flash from the enemy. One moment's thought with a few active brain cells would have told hime that the only way of hiding the flash from a person in the line of fire was to build a bloody great wall between the shooter and the enemy, thus rather defeating the purpose of the rifle. Who cares if the enemy is blinded (could even be a useful psychological side-effect)? - The shooter doesn't want to be blinded.<br /> <br /> The second is the notion that the flash hider is some kind of a muzzle brake. Now for the kind of person who believes this there is no point in waffling on about Venturi tubes (where the velocity reduction produces an increase in pressure) and not many people understand the action of the steam injector typically used on steam locomotives, so I tell them this: Just stand the No. 5 upright with the muzzle down on a table. That ought to remind you of something - the exhaust nozzle on a rocket standing on a launchpad. Something that is intended to produce a large pressure, not to reduce it. The flash hiding effect is produced not only by the barrier between the shooter and the muzzle blast, but also by the sharp velocity and temperature reduction produced by the expansion of the gases in the cone. (Thank you Peter Laidler for pointing that out on the old forum.)<br /> <br /> The trouble with the "people who just do not know what they are talking about" mentioned above is that they sometimes get into positions where they try to control the rest of us on the basis of their ignorance. According to your present mood you may laugh, cry, or just plain despair at the following:<br /> On the main DSB (Deutsche Schützenbund) website there is a link to an paper drawn up for the guidance of scrutineers at DSB competitions.<br /> <br /> It includes the following gem (I give just the sense, not an exact translation):<br /> "The flash hider (= muzzle brake) on the Enfield No. 5 must be removed for DSB competitions." So much for only permitting original service rifles as issued!<br /> <br /> This is just the worst example. There are others.<br /> <br /> Patrick</blockquote> </div> </li>  <li class="postbit blockbody" id="post_23"> <div class="header"> <div class="datetime">03-07-2009, 06:51 PM</div> <span class="username">mozark</span> </div> <div class="content"> <blockquote class="restore">A few years ago I built myself a hunting rifle in 9.3x62. It's a Mannlicher, so short, 21.5" barrel, and light, something like 7 3/4 lbs without a scope, which is usually how I hunt with it. I built the provision for a detachable scope foreward, "scout" style scope into the express sight base, but I like hunting in the woods with iron sights. At any rate, this rifles gets ones attention, and I load it relatively sedately. It's actually a very good hunting rifle, as you're not thinking about how it's going to kick the ****e out of, and deafen, you, when your pointing it at game.<br /> <br /> My point is that the weight and dimensions of that rifle are reminiscent of a <br /> No. 5, and while I like my No.5, and have occasionally hunted with it, it spends a lot more time gathering dust. There is something wicked and cruel about a short, light weight, high powered rifle, that also has a rounded slippery butt and butt-plate that never shoulders to quite the same location.<br /> <br /> MM</blockquote> </div> </li>  <li class="postbit blockbody" id="post_24"> <div class="header"> <div class="datetime">03-08-2009, 07:50 AM</div> <span class="username">Son</span> </div> <div class="attachments">2 Attachment(s)</div> <div class="content"> <blockquote class="restore">Took my position on the mound one day between a No5 (with a bogus looking stainless barrel) and a No4 with a globe sight and no bayonet lugs. It seemed they were both .223 conversions. At the order "fire" I let rip with a MkVII round through the faithfull old Faz No5 and caused both gents to roll away off their aim. One exclaimed "what the hell is that thing?" I told him, the same as his was before he'd had it neutered.<br /> <br /> I've never had an issue with my No5. I fired my new (1970) target rifle yesterday, not knowing what to expect. 7.62 out of a 20" barrel. I found that like the No5, it will hurt if you are not set properly. I only mucked up once. No problems after that. Once I got it on target I printed a fair group. Using sporting ammo, just under an inch at 100m sitting, off a rolled up jacket.</blockquote> </div> </li>  <li class="postbit blockbody" id="post_25"> <div class="header"> <div class="datetime">03-08-2009, 05:47 PM</div> <span class="username">me2</span> </div> <div class="content"> <blockquote class="restore">Patrick, you are dead on with the rocket theory. That flash hider is a perfect built-in rocket nozzle and I know cause where I work we turn them on a cnc lathe specially dedicated to that process exclusively for an air-to-ground missle for U.S. defence dept. They are made from a ceramic/carbide blend and are on the nasty side to machine. I surmise that cone shape on the #5's tends to change the initial shape of the muzzle blast from a large ball to a rather enlongated stream of fire which would help the shooter and to some extent reduce the visibility of it to an opponent. Would be interesting to know the amount of R&D that went into the British adapting the final shape of them.</blockquote> </div> </li>  <li class="postbit blockbody" id="post_26"> <div class="header"> <div class="datetime">03-09-2009, 03:52 PM</div> <span class="username">Jim K</span> </div> <div class="content"> <blockquote class="restore">The comparison of a rifle to a rocket is interesting because there is an exact comparison. A rifle recoils because a mass (the bullet and propellant gas) moves forward under gas pressure and the rifle recoils to the rear. In a rocket, a mass (a huge quantity of gas and burning particles) moves rearward, and the rocket recoils, moving forward. The rocket does not "push" on anything, which means that it will work in a vacuum, the same as a rifle will recoil in a vacuum. Essentially, man went to the moon on recoil.<br /> <br /> Jim</blockquote> </div> </li>  <li class="postbit blockbody" id="post_27"> <div class="header"> <div class="datetime">03-09-2009, 04:16 PM</div> <span class="username">Peter Laidler</span> </div> <div class="content"> <blockquote class="restore">On a similar vein, the original flash eliminator for the Bren was changed prior to manufacture from the original straight taper of the ZB design to a stepped double taper dreamed up at Enfield. However, this caused considerable build-up of carbon within the chamber that a special scraper was designed to scrape it out due to the carbon build-up affecting the free flow of exhaust gas and then, the accuracy of the projectile.<br /> <br /> It didn't take long for Enfield to get back to basics and by mid 1940, the stepped taper flash eliminator was redesigned and a straight taper was introduced. That's the reason your Mk1 Bren barrel (with stainless (?) steel muzzle end) can have a stepped or straight taper flash eliminator.<br /> <br /> This is a great thread. Incidentally, has anyone worked out the inclusive angle of the No5 flash eliminator. I think it is/should be 29 degrees as a figure that sticks in my mind somewhere. If it's not handy, I'll do it at work later in the week with a lathe, DTI and compound slide.............</blockquote> </div> </li>  <li class="postbit blockbody" id="post_28"> <div class="header"> <div class="datetime">03-09-2009, 04:37 PM</div> <span class="username">Alan de Enfield</span> </div> <div class="content"> <blockquote class="restore"> <div class="bbcode_container"> <div class="bbcode_description">Quote:</div> <div class="bbcode_quote printable"> <hr /> <div> Originally Posted by <strong>Jim K</strong> <a href="showthread.php?p=24427#post24427" rel="nofollow"><img class="inlineimg" src="images/tacticalgamer/buttons/viewpost.gif" alt="View Post" /></a> </div> <div class="message">The comparison of a rifle to a rocket is interesting because there is an exact comparison. A rifle recoils because a mass (the bullet and propellant gas) moves forward under gas pressure and the rifle recoils to the rear. In a rocket, a mass (a huge quantity of gas and burning particles) moves rearward, and the rocket recoils, moving forward. The rocket does not "push" on anything, which means that it will work in a vacuum, the same as a rifle will recoil in a vacuum. Essentially, man went to the moon on recoil.<br /> <br /> Jim</div> <hr /> </div> </div> And they say "its not rocket science" - well it look like it to me !!!</blockquote> </div> </li>  </ul> </div> <div class="below_body"> <div id="footer_time" class="footer_time">All times are GMT -4. The time now is <span class="time">07:05 AM</span>.</div> <div id="footer_copyright" class="footer_copyright">  Powered by <a href="http://www.vbulletin.com" id="vbulletinlink">vBulletin™</a> <br />Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.  </div> <div id="footer_morecopyright" class="footer_morecopyright">   Username Changing provided by <a rel="nofollow" href="https://www.dragonbyte-tech.com/vbecommerce.php?productid=138&do=product&utm_source=milsurps.com&utm_campaign=product&utm_medium=Username%2BChange&utm_content=Free" target="_blank">Username Change (Free)</a> - <a rel="nofollow" href="https://www.dragonbyte-tech.com/?utm_source=milsurps.com&utm_campaign=site&utm_medium=Username%2BChange&utm_content=Free" target="_blank">vBulletin Mods & Addons</a> Copyright © 2025 DragonByte Technologies Ltd.<br />Thread / Post Bookmarks provided by <a rel="nofollow" href="http://www.dragonbyte-tech.com/vbecommerce.php?productid=141&do=product&utm_source=milsurps.com&utm_campaign=product&utm_medium=Thread%2B%2F%2BPost%2BBookmarking&utm_content=Free" target="_blank">Thread / Post Bookmarking (Free)</a> - <a rel="nofollow" href="http://www.dragonbyte-tech.com/?utm_source=milsurps.com&utm_campaign=site&utm_medium=Thread%2B%2F%2BPost%2BBookmarking&utm_content=Free" target="_blank">vBulletin Mods & Addons</a> Copyright © 2025 DragonByte Technologies Ltd.<br />Copyright ©2006 - 2024 by MILSURPS.COM - All Rights Reserved<br /><div class="shade footer_copyright">Your IP Address: <span class="time">216.73.216.35</span> | OS: <span class="time">unknown</span> | Browser: <span class="time">Mozilla 5.0</span></div> </div> </div> <script type="text/javascript"> this.blankwin = function(){ var dlists = new Array(); dlists[0] = 'milsurps.com'; dlists[1] = 'radiocdn.com'; var hostname = window.location.hostname; hostname = hostname.replace("www.","").toLowerCase(); var a = document.getElementsByTagName("a"); this.check = function(obj){ var href = obj.href.toLowerCase(); var dbopcount = 0; if (href.indexOf("http://")!=-1) { for (jdi = 0; jdi <= dlists.length; jdi++) { if (href.indexOf(dlists[jdi]) == -1) { //alert("NO MATCH " + dlists[jdi] + " " + href); dbopcount = dbopcount; //Do nothing } else { //alert("match " + dlists[jdi] + " " + href); dbopcount++; } } if (dbopcount > 0) return true; //If this link URL was an internal URL else //there were no matches to any internal domain, so leave it external return false; } else { return false; } //return (href.indexOf("http://")!=-1 && href.indexOf(hostname)==-1) ? false : true; }; this.set = function(obj){ obj.target = "_self"; }; for (var i=0;i<a.length;i++){ if(check(a[i])) set(a[i]); }; }; // script initiates on page load. this.addEvent = function(obj,type,fn){ if(obj.attachEvent){ obj['e'+type+fn] = fn; obj[type+fn] = function(){obj['e'+type+fn](window.event );} obj.attachEvent('on'+type, obj[type+fn]); } else { obj.addEventListener(type,fn,false); }; }; addEvent(window,"load",blankwin); </script> </body> </html>