New to me Rolling Block - I know next to nothing about these

....and there seem to be soooo many iterations of this rifle in type and caliber. This seems to definitely be a military model since it has a bayonet lug and a long one at that - I'm thinking some type of saber since it looks like the lug on my Chassepot (but the Chassepot bayo doesn't fit). No caliber markings....or any markings save a few very small crowns, on the hammer, the receiver, barrel and one (middle) barrel band - all on the left side. No other dates, codes, stamps, etc, besides the 2 line patent info on the tang. Butt does have a "G" inside a circle but that's it.

So, any RRB experts out there? Centerfire? Rimfire? Caliber? Ideas on where this was contracted out to? I assume Europe for the crown stamp.

https://www.milsurps.com/images/impo...557658f6-1.jpg
https://www.milsurps.com/images/impo...85331982-1.jpg
https://www.milsurps.com/images/impo...e42ace27-1.jpg
https://www.milsurps.com/images/impo...3baca22f-1.jpg
https://www.milsurps.com/images/impo...c0cc171e-1.jpg
https://www.milsurps.com/images/impo...98130ac4-1.jpg
https://www.milsurps.com/images/impo...0bb81ea9-1.jpg
https://www.milsurps.com/images/impo...0f83bdf1-1.jpg
https://www.milsurps.com/images/impo...e926188e-1.jpg
https://www.milsurps.com/images/impo...d81e8912-1.jpg
https://www.milsurps.com/images/impo...957003ba-1.jpg
https://www.milsurps.com/images/impo...5e1a1a47-1.jpg
https://www.milsurps.com/images/impo...732a06e5-1.jpg
https://www.milsurps.com/images/impo...928f9e41-1.jpg
https://www.milsurps.com/images/impo...ee9dcb32-1.jpg

Quote:

---

Originally Posted by kotkinjs1

Centerfire? Rimfire? Caliber?

---

Well if you have it in your hands, those are questions you can answer for yourself !!!

Quote:

---

Originally Posted by kotkinjs1

Ideas on where this was contracted out to? I assume Europe for the crown stamp.

---

It looks like one of the early Danish RBs (the crown stamp) which were actually made by Remington, having the correct Remington stamped text on the tang. Hence the "U"s on the right side of the barrel bands (U= up, reads correctly when the rifle is standing upright in a rack) and the Danish crowns stamped later on the left. It took a long "Yataghan"-type sword bayonet.

The rifle number (possibly damaged) should be on the left side of the barrel, around the "waterline" and below the backsight. Remove the fore-end wood and take another look. There is another Danish crown stamped between the number and the receiver (this latter seems to be visible). The rifle number is also stamped on the side of the tang (i.e. not visible when the rifle is assembled)..

However, the backsight does not look like the original one for a Danish RB, but rather like the type I have on my Egyptian RB. The original had a very long backsight leaf that protruded beyond the sight base. Easy to imagine that these were often damaged and replaced by a more conventional backsight. The Danish RB cartridge went through a couple of versions, and the later Danish barrels were apparently tighter than the early Remingtons, so you will have to make a chamber casting to establish which one it is.

BTW, although it may turn out to be close, it is NOT 45-70. Dealers have been known to describe Danish RBs as being chambered in 45-70, presumably hoping that the customers would not notice the difference, at least not immediately. Hence, A CHAMBER CASTING IS A MUST!

Patrick, thanks for the reply. I've been able to find some more info and I've read that the sights were switched out at some point from the original to the long type when Denmark converted them to a smokeless CF round from the original RF. Possibly then this is the earlier, unaltered for some reason, type?
And from what I've read it also seems like the Remington-produced rifles left the factory without serial numbers. Only the later Danish made ones were stamped with the serials. Again, making me thing this is an early Remington made one for the Danes?

I have a sporterized version of the rifle and mine had the same type of sight. Is your rifle .45 cal or .50 cal. Is yours still rimfire?
john

jamie5070, still RF - hasn't been converted to CF nor does it have the elongated rear sight as I've read they were all switched to upon conversion. Not sure of the caliber yet. Original, unconverted, model 1867s were in 12.17x42RF and 12.17x44RF rimfire (so says wikipedia at least). But I've also been told it could be 11.7x46R?

Quote:

---

Originally Posted by kotkinjs1

I've read that the sights were switched out at some point from the original to the long type when Denmark converted them to a smokeless CF round from the original RF.

---

In which case, the block might well have TWO holes for firing pins! One for the rimfire, and one for the centerfire.

---------- Post added at 07:53 AM ---------- Previous post was at 07:48 AM ----------

Quote:

---

Originally Posted by kotkinjs1

And from what I've read it also seems like the Remington-produced rifles left the factory without serial numbers.

---

I doubt that. Any factory needs to be able to identify what it produced, to confirm production of quantity ordered and/or delivered, identify a lot in the event of quality problems etc. The Remington factory number is on the tang of your rifle. Whether or not the Danes added an issue number of their own after acceptance is another matter.

---------- Post added at 07:59 AM ---------- Previous post was at 07:53 AM ----------

Quote:

---

Originally Posted by kotkinjs1

Original, unconverted, model 1867s were in 12.17x42RF and 12.17x44RF rimfire (so says wikipedia at least). But I've also been told it could be 11.7x46R?

---

As I wrote - you really need a chamber cast! The 11.7 calibre seems to have existed in lengths 41.5mm / 45.5mm / 51mm (or 51.6mm).

also, forgot to mention, it has a centerfire block. No double firing pin conversion, just CF. Which is odd (?) because if it was a conversion it should have the newer style rear sight and ladder? I've read that the CFs were converted for mainly civilian use after the Danes took them out of service?

Well I reckon for any sensible shooting the backsight is the wrong way around. If you get into the aiming position, that curved slope on the crosspiece of the leaf should be at the front - away from your eyes. If it is towards you, then it reflects horribly and just does not make sense. That curved slope must be at the front if you want to get a good sight picture. As it is, the crosspiece with the sighting notch is also uncomfortably close to the eye. The other way around, it would be a bit further away.

Now before anyone comes with claims of "originality" for one direction or the other, please note that I am just going by what makes sense for shooting. (Layman's book shows RBs with the sight in both directions, so that's no help.) Looking at my other BP rifles, the voting is 100% for any non-vertical surface being at the front, away from the shooter's eye.

Both backsight and block could be (and were) easily switched out. RBs usually had a long service life, and armorers quite pragmatically repaired and upgraded rifles according to the parts that were available. So you should not get upset by your rifle failing to match some hypothetical "book" standard.

ok - I got my copy of Layman's 'Remington Rolling Block Military Rifles of the World' in the mail today. Read through it and paid special attention to the Danish section. Doesn't seem to fit. Went a little further and got to the French section (pg 81). Started looking though it and amazingly I think that's what I've got here! A "French Model." The only thing that seems to be missing/swapped are the two barrel bands with the "U"s versus crowns. All else is in order - the later breech block (post Aug 1870), tang dates, crowns with no other receiver markings, the G inside the circle on the buttstock, saber bayo lug, sight (which I think you're right Patrick is backwards). Anyone else have this book and can confirm?

Seems Remington sold a large lot to Greece who then defaulted on the payment and these were purchased by France who was in dire need of weapons leading up to the Franco-Prussian War. When they arrived in France they were stamped with the "G" for Greece on the butt signalling a different caliber (the Greek rifles took Russian ammunition, .42 Berdan).

Got the Berdan cartidge in the mail today - fits like a glove! Well, the hand inside the glove I guess is the more correct analogy. The extractor closes flush with the rest of the breech and the rolling block seems to sit flush on top of that when closed making a tight seal. No wiggle or anything sticking out at all.

So that would mean this is an unaltered Greek contract rolling block sent to France probably in the latter half of 1870? One of about 9000?

I don't know why, but I really like the Remington rolling block. It was a high powered, accurate single shot for its day and as such saw a lot of use as a hunting rifle. I think it was also exported to foreign armies after being narrowly rejected by the US government which favored the Springfield trap door rifle. It was the pinnacle of single shot, the next step being the Mauser action rifles that stormed the 1890s.

It might be interesting to see what sort of groups you could make with it at the range. It was said to have competition level accuracy.

I believe there were two problems with the Remington rolling block action. the first problem was loading the long range Sharps cartridges, you had to grind out part of the hammer in order to chamber the cartridge. The longer range Sharps cartridge were used on both buffalo and the target range. The second problem was the very heavy trigger pull which was difficult to shoot with. The Remington set trigger or custom double set triggers were a lot better to use.

I would think that the Sharps, the Sharps Borchardt and Winchester Hi Wall were all better riflesAttachment 58012Attachment 58013Attachment 58014