-
help identifying bayonet
So I am trying to help a friend out with figuring out what kind of knife thistles is. It was found amongst other GI bring backs. It seems odd to me that is has a wooden handle and such a shiny blade. However is has a serial number on the knife and on the scabbard as well. The scabbard also has a KK on the bottom of it. So all signs point to it being military. Any help would be greatly appreciated. It also bears the mark of the crown over the Z. So I guess possibly Czechoslovakia. Perhaps made under Nazi occupation later in the war and that is why the wooden handle.
http://www.calguns.net/calgunforum/a...5&d=1411926147
http://www.calguns.net/calgunforum/a...6&d=1411926245
http://www.calguns.net/calgunforum/a...7&d=1411926420
http://www.calguns.net/calgunforum/a...8&d=1411926436
http://www.calguns.net/calgunforum/a...9&d=1411926454
-
-
5 Attachment(s)
Ugh I cant get it to upload
-
-
Thank you so much. Its been months of searching on my own. I thought is seemed kind of cheeky for a bayonet. Seemed chromish and hastily made. My buddy will be stoked to find out what it is. I believe it was his grandfather that this belonged to. He was special forces in the European theatre of WWII and had several other very impressive pieces including an SS Walther, holster, and sword bayonet combo with the officers hat. He just bought a house and has 3 kids plus he is getting married here soon. This will be very welcome news indeed. Thanks again bud
-
No sweat. Like the captions say, it's somewhat scarce and just a bit valuable. Take care selling it...get the right money.
-
I think there is a finish of some kind added to it :-( some kind of chrome refinish. This would not have been done by the arsenal/factory right? So should I leave it as is? Or remove it. I noticed that there very small bubbles on the blade. As I wiped one it popped some of the foil like finish off, and it appears copper washed underneath. Not like blued steel. Is this copper applied to make the chrome like refinish stick?
Thank you again.
-
It's hard for me to tell from the pics, but it sounds like a plate has been applied. Yes, there's a binder applied before the chrome or nickel. It can be removed but usually not by the layman. The originals were in the white I think, no finish. It might best be left alone.
-
In that case I will not mess with the spot where it chipped. How would you say this will effect the value on the piece? Of course we have no idea when it was added or why. But should I expect to get a significant amount below higher value for this?
-
Value depends on time and place. The individual(s) that are bidding. One man might get it for a few dollars. Two bidding might drive the price to the moon. You can't tell until you sell it.
-
Many, many knives, swords, bayonets, etc that were brought back from WWII ended up being chromed or nickled plated. At the time these were just spoils of war and had no particular collector's value. Kind of like the multitude of Romanian AKM bayonets from Iraq that have been around for the past ten years. Unfortunately, in my opinion, it greatly diminishes the value to collectors. Unless a piece is super rare or scarce I won't touch it if it's not in VG+ or better original condition. I'm sure there are others that will disagree, but most of my collector friend feel the same.
-
I do agree to a point, but this one's a bit scarce so it may do OK anywayzzz...
-
There are five of these listed for sale right now on ebay.
-
-
I disagree. If any one of five pieces can be purchased at any given time, it really isn't that hard to find.
-
Quote:
Originally Posted by
porterkids
I disagree.
That's nice...
