Printable View
Greetings from a new member....
Is ammunition that is designated for an M1 Garand ok to use in a Remington 1903-A3?
Has anyone used: PRVI 30-06 Springfield 150 gr. SP 20 rnd/box ammo? Not sure if the manufacture is PRVI Partizan or PPU...might be the same outfit? And, what is meant by "ball" ammo?
I am looking for some range ammunition that has NO steel in it.
Thanks,
LRMars
Yes.
Yes.
Yes, same guys........great ammo.
Ball ammo has a basically inert projectile. It doesn't trace, flame, explode.........just puts a neat .308 hole in stuff.
Steel cased, jacketed, or cored ammo will all stick to a magnet. You can't always be sure what bit of the ammo is steel, but if any bits attract a magnet it does contain at least one steel component.
+1
Privi is Serbian. Good range ammo. I use it for my Enfield, A303, and Garand. It also reloads well. Neck size for the.303 & A303. Try www.ammoseek.com for places with good prices.
Ok...so I ordered 30-06 ammo and the box says Prvi Partizan .30-06 Springfield (M1 Garand) 150 Gr. Full Metal Jacket, will this ammo function properly and SAFELY in my Remington 1903-A3 bolt action rifle?
Thanks,
LRMars
I shoot Korean KA arsenal M2 ball in my 1903. There is some of that for sale on the web now. In good condition, its very accurate and functions great. Corrosive primers so I clean with water based solution after shooting, but in a bolt gun thats not a problem. I believe mine has a copper jacket, but you have to check or ask before you buy any.
Garand rated ammo is lower pressure to protect the gas operating system. A properly functioning A303 will be just fine. Mine likes Hornady Superformance 168 gr A-Max, which is too hot for the Garand. Black Hills Match ammo is good too. The Privi is good range ammo, not match grade.Quote:
Originally Posted by lrmars
Check out the search function here and you will find all kinds of info about ammo and misurps.
Garand ammo is a lower pressure? No it is not lower pressure. All 30-06 FMJ loaded for USGI use in WW2, Korea and Viet Nam was loaded to the same pressure range no matter if it was used in an 03, a BAR , 1919 or a Garand. The Garand does need a specific powers for the proper pressure at the port so all of the ammo was loaded to Garand spec.
The first 'Yes' in my first post was my answer to you. Again.........yes, you can shoot it happily in your 03A3.
Both are correct. It was a design spec to help considerably with the logistics of producing, transport, storing, etc of one type of ammo to be used in several gun types....
They did the same with .45 ammo. Thompson, grease guns, 1911's/ 1911A1s, and even the FP-45 Liberators dropped into France all used it.
PS - different suject, but I've seen video of soldiers firing BAR's and wonder what the recoil whould be like in full auto!
Harlan The BAR being approximately 18 pounds and being a gas piston operating gun most of the recoil was reduced to manageable levels. I also understand from men who used them that it had two cycle rates of fire and most used the slower cycle rate to reduce the muzzle climb.
Thanks, TDH! I have never had the opportunity to even pick one up and didn't know they were so robust.
I bought a de-milled Thompson SMG a few years ago and I was shocked it was so heavy, even without ammo. I can hardly imagine how heavy the M1928 would be with a loaded 50 rd drum, or even the 100 rd drums the gangsters and police use in old movies!
Best regards,
~ Harlan
On the bright side Harlan, the '28 gets lighter as you fire. I had one with a drum a bit back and didn't use the drum so much as I'd go through too much ammo. Problem with drums in action is the noise you made when moving with a loaded drum. They were big and clumsy, if damaged you lost all that capacity, but the noise would be worst to me. The ammo rattled back and forth inside...
Harlan it's been said that the BAR was Clyde Barrows favorite weapon. His was stolen from an armory and he cut both the barrel and the stock down for better concealment and also so it was easier to use from a moving car. The Thompson is almost 12 pounds on it's own. Vic Morrow who played Sgt Saunders in Combat had a wooden one made because the original was to heavy to carry all day while shooting.
Thanks, TDH! I did a search and found this link to some of their guns. Clyde seemed to want to modify everything.
http://texashideout.tripod.com/guns.html
Bonnie and Clyde were locals here. They were very bad and killed many people. I saw Clyde's little grown over graveyard on the bad side of town. It's all run down, locked and fenced in so you can't get to the graves. Fitting resting place.