SG 1.827 Barrel & Receiver markings

I have a slide and a receiver with the letter J on them and a barrel that I can't idenify. Any ideas ?

Thanks Chris

SG Receiver And Barrel Marks Slideshow by carwashchris1 | Photobucket

Is that an I-BR at the back (on top) of the barrel nearest the breech? If it is, it's one of the 5000 button rifle barrels Inland installed late in production. I have a 6.975xxx with one of those barrels. It has no date stamp of any kind, but does have an Inland proof "p" and the famous hieroglyphics on the barrel flat. I hope this helps.

I think your receiver was made very close to the same date as mine. Yours is an S'G' isn't it? My barrel is an Underwood 8-43. - Bob

Yes Bob it is yours looks just like mine, any idea what the J stands for ? My slide is also marked the same way. Thanks Chris

Quote:

---

Originally Posted by USGI

I think your receiver was made very close to the same date as mine. Yours is an S'G' isn't it? My barrel is an Underwood 8-43. - Bob

---

---------- Post added at 08:59 AM ---------- Previous post was at 08:56 AM ----------

Well I thought is was I-PR but after re-looking I think it is a BR, someone else who hasn't seen it said they thought it was a un-marked Inland as well. Thanks Chris

Quote:

---

Originally Posted by deldriver

Is that an I-BR at the back (on top) of the barrel nearest the breech? If it is, it's one of the 5000 button rifle barrels Inland installed late in production. I have a 6.975xxx with one of those barrels. It has no date stamp of any kind, but does have an Inland proof "p" and the famous hieroglyphics on the barrel flat. I hope this helps.

---

Reference I-BR marking can be found in CC newsletter #360p12. Usage was in Spring of 1945. My Inland 6,974### has this barrel. John

The J stamps are just inspection type stamps and mean nothing. The barrel is an Inland which S'G' did use during their production. These came from BLC and S'G' used about 37,000 of them between Sept. 1943 and Dec. 1943.

Is it possible that the I-BR Inland barrel could be correct for the S' G' 1,827@#$ receiver ?

Quote:

---

Originally Posted by Bruce McAskill

The J stamps are just inspection type stamps and mean nothing. The barrel is an Inland which S'G' did use during their production. These came from BLC and S'G' used about 37,000 of them between Sept. 1943 and Dec. 1943.

---

Chris, I don't believe it to be the original barrel. There were only 5000 of the I-BR made as a trial type button rifling in the spring of '45. Your S'G' is long before '45. John

Quote:

---

Originally Posted by carwashchris

Yes Bob it is yours looks just like mine, any idea what the J stands for ? My slide is also marked the same way. Thanks Chris

---

Bruce pretty much covered it in his post. Paraphrasing WarBaby III, some early S'G' receivers were marked there with the single digit 3 or 5 - later they switched over from numbers to many single letters ranging from A-Z. Carbine Club research indicates there was no definite pattern with the letters in relation to the serial numbers. I'll have to check whether my slide has the letter J. - Bob

Chris: My s/n is about 2,000 higher than yours, and it does have a J on the slide. - Bob

Twins ! LOL

Quote:

---

Originally Posted by USGI

Chris: My s/n is about 2,000 higher than yours, and it does have a J on the slide. - Bob

---