Printable View
I am blaming this purchace on Aragorn's KAR98A project.
"Barn find" Twin 1893 Spanish contract Mausers with Saanish crest and Berlin 1896 on top of the receiver. One rough & perhaps salvageble nd the other seems to have the parts the other is missing (probabal organ donor). If my brief research is correct these appear to hve perhaps have spent some time in Cuba.
The fun begin.
I think Aragorn' projects (the KAR98A in particular) might be responsible for quite a few new projects.
they look like a nice pair, enough to finish one and provide the basis to de-sporterise another.
Neither pper sporterised but one is very rusty. The best most complete has insect holes all over the stock so I thought about switching wood but "wormwood" has a matching SN & sharp cartouch.
Any ideas on filling the holes? Just trying for the safe to fire relic type restoration.
I will post some better photos of the stock.
there is some stuff here about repairing woodworm damage that sounded good to me.
https://www.milsurps.com/showthread.php?t=54310
A bit of progress. Started with dissassembly and accessment. Bug holes galore in the primary rifles stock but very few missing parts to make one sound one out of the two rifles. I repaired the insect holes as follows.
Blew them clean with compressed air and filled with stainable wood filler with as little left above grade as I wanted to keep sanding to a minimum. After the filler dried I spot staind the tiny spots with a syringe. I wish I had used lighter color.
The photos show the results. Looks a bit better I think.
Am thinking about the electrolysis process mentioned in other threads for the barreled action. Any thoughts on the wisdom if that route?
Just got blasted with a shotgun during the Spanish Civil War.
I had that thought as well with eight shot.Quote:
Originally Posted by Aragorn243
If I am buying its patina. If selling its rust.
Perhaps tree had acne.
UPDATE
Tried the electrolysis trick posted in another thread. Here are a few before pictures.
And a few after. Sorry could not wait to see it assembled (should have taken the photos first). I would encourage anyone with a basket case to try electrolysis.
Quite pleased given its 120 years old and the condition in which it was found.
That is impressive. I may have to try that sometime.
It is as simple as it looks. Obvious as even I can do it.
Perhaps I will start on number two while looking for the swivel screw and correct streight handlled bolt required to finish this one.
I like the fact it looks preserved but not restored.
I need to get one of those tubs that will fit the entire barrel/action assembly. I have a carcano barrel I need to get rust out of the bore badly. was working on it with brushes over the weekend and its just really bad. Rifling looks good but I'm afraid to run a bullet through it as it might ring the barrel or worse.
The 36" window box (longest I could find) came from Lowes. Washing soda Walmart. I think a vertical arrangement with 6" PVC capped at one end might be the ticket for longer barreled actions etc.
I also read a suggestion that a small steel rod be placed in the barrel insulated from contact with the barrel with O rings which might work with a plugged muzzle & bore filled with the solution.
they look like prime firearms to me:D:D
I am not sure #2 will not turn out better than #1. I will check the tank this evening.