Picked this beauty up for $450. Should be arriving Saturday.
Been a long time since I've seen one this nice! What do you guys think?
Pics: Imgur: The most awesome images on the Internet
Printable View
Picked this beauty up for $450. Should be arriving Saturday.
Been a long time since I've seen one this nice! What do you guys think?
Pics: Imgur: The most awesome images on the Internet
I like it!
Very nice!!
Let's see if this direct link works:
https://imgur.com/a/qlE2r
Thanks, I was trying to figure that out.Quote:
Originally Posted by Brian B
It looks about flat new, near the best I've seen.
Very nice rifle but I have only one question and I know that the bolt head No. is irrelevant but I have to ask a No.3 size bolt head in a almost new rifle considering there are 3 other sizes before that one is reached 0, 1, 2 size being progressively larger in relation to their number. It is just a question not suggesting anything sinister about the rifle in question.
My personal thought on the No. 3 size bolt head is it what was simply needed to achieve the proper head space before leaving the factory. It is Savage and flaming bomb marked, which would be nearly impossible to find as a replacement had the head space been "worn" to necessitate it. It seems to fall into the acceptable range outlined on these boards many times before.Quote:
Originally Posted by CINDERS
Beautiful Rifle ! Congrats!
I like the way you think, because secretly I had my doubts about that No.3 bolt head as well. Resting easy now!Quote:
Originally Posted by SpikeDD
That is a beautiful example, I would go for that No4 in a heartbeat .. museum worthy example.
Hesalite: I don't know what the odds of finding a "3" bolt head on a virtually unused No. 4 would be but I wouldn't think it would be high. On the other hand, a former owner/ tinkerer might have put a "3" on it to tighten up headspace to the lower limits and for no real reason. I have a Longbranch with a really big "3" on it that was set up by a target shooter to just barely allow the bolt to close on thicker rimmed brass. Gauging it showed I could easily get acceptable headspace with a normal "1" or "2" bolt head. Getting back to your rifle, the only thing I see in the photos that I wonder about is the strap at the rear of the forend. To me that doesn't look like the way they came from the factory. Is the forend Savage stamped?
Ridolpho
Not sure what you mean by strap at rear of forend.Quote:
Originally Posted by Ridolpho
It is the flat tie strap & rivet that goes across the back of the bottom wood where it meets the wrist which is what I think Ridolpho is referring to.
Also the chunky "S" in side the box under the wrist looks like it denotes a Savage Butt not a "Small" one if I am correct.
Ah gotcha. Looks good to me. And not sure if the forend is stamped S. Rifle arrives Saturday. I'd bet my Savage scopeless T it is though. No one else used that kind of wood for their stocks.Quote:
Originally Posted by CINDERS
Very nice specimen but the sling is mounted incorrectly. Hooks should be facing outside to avoid scratching the stock.
Yup, I'll be sure to flip it around once I pick it up Saturday.Quote:
Originally Posted by André
I wouldn't doubt a bolt head would be changed out to tighten up head space but many rifles left the armory with No.3 bolt heads. I couldn't venture a guess as to the number, but in this case, a Savage marked No.3 bolt head being found that indexed correctly AND head spaced correctly? A No.3 bolt head is difficult enough to find to begin with...what are the odds of finding a Savage marked one that was right on the first go?Quote:
Originally Posted by Ridolpho
AS to the rear strap on the forend....I have seen this type of fitment before. I don't know if it is something done from new or a "re shape" of some kind to fit a new pin. It also appears to be sanded along with the contour of the wood.
I had a 1955 Faz No 4 Mk 2 in mummy wrap some years back. I unwrapped it (kicks self). It had a No 3 bolt head.
With permission from Hesalite, here is my example of the nicest Savage I have seen. It is essentially un issued and shows no sign of having seen anything but storage wear. I've owned this rifle for 12 to 14 years? Note the No.3 bolt head.
Attachment 78218Attachment 78230Attachment 78229Attachment 78228Attachment 78227Attachment 78226Attachment 78225Attachment 78224Attachment 78223Attachment 78222Attachment 78221Attachment 78220Attachment 78219Attachment 78206Attachment 78217Attachment 78216Attachment 78215Attachment 78214Attachment 78213Attachment 78212Attachment 78211Attachment 78210Attachment 78209Attachment 78208Attachment 78207
After looking at the close up of the bolt head, I noticed the bolt head guide appeared to be chamfered on both edges. I cleaned the grease out and attempted a better shot...
Attachment 78231
Probably to assist in guiding it into the rail as it travels during cycling past the cut out area where you engage the bolt head.