Printable View
What kind of front sight/front sight blade did the Springfield Armory install on their DCM/NRA sporter rifles? Here is the photo of the one on mine. As I've mentioned earlier, I know next to nothing about these rifles. Is that front sight blade an aftermarket replacement, a military blade modified to accept the brass bead insert, or what the Armory used on their sporters? Any information would be appreciated. Thank you!
https://www.milsurps.com/images/impo.../1903_12-1.jpg
You have the standard front sight with the military/issue front sight replaced with probably a Lyman sight blade. An easy fix....just install the correct height military blade.
Hmm, I don't know about that.Quote:
Originally Posted by m1903rifle
This rifle is about 98% certainly an original sporter sold by the DCM.
Did those have the standard military blade? In conjunction with the Lyman rear sight, I'd really expect something more like what we see in the picture above.
Thank you, gentleman, for the information.
As the rifle has been confirmed (as much as humanly possible) that it is a DCM Sporter that was either sold to a governmental agency or individual member of the military and thus is not a "hit" in the SRS records and has a Lyman 48 rear aperture sight, I see no reason to change the front sight blade.
Thank you again!
There is no reason to change the front sight blade, but it originally came with the military front sight blade. Read any of the standard references such as Brophy to confirm.
Good to know! I figured with a name like "m1903rifle" you'd have the answer!Quote:
Originally Posted by m1903rifle
Thanks :thup:
Both Lyman and Marble (could be others) made the gold or ivory bead front sight that would dovetail into the 1903 front sight base. Attachment 91324Attachment 91325
Ah, got it! Thank you for the information!Quote:
Originally Posted by m1903rifle
An original 1903 front sight as in installedAttachment 91338 will have a line through it and the base as shown in my photo
It's really difficult to see much with the sight protector present, but, judging by your photos, it looks to me like the front sight blade on my rifle is probably a Lyman. Thanks for posting the photos!Quote:
Originally Posted by RCS
---------- Post added at 02:43 PM ---------- Previous post was at 02:43 PM ----------
Very interesting!Quote:
Originally Posted by RCS
Well, I removed the front sight protector (it was bent, anyway) and, as m1903rifle correctly stated, my rifle has a Lyman front sight blade inserted in the stock SA front sight base.
Thanks to everyone for your help and information!
I finally got around to taking some photos of my rifle's front sight with its protector removed. As you can see, it is a Lyman 26 NS blade with gold bead and its base does have the alignment mark in it. Thank you again for the information and photos you provided!Quote:
Originally Posted by RCS
Yes, the sight base and its retaining screw look like a wolverine was gnawing on them. No, I have nothing to do with their present condition. :)
https://www.milsurps.com/images/impo..._sight_1-1.jpg
https://www.milsurps.com/images/impo..._sight_2-1.jpg
https://www.milsurps.com/images/impo..._sight_3-1.jpg