-
What type or part of sight due I have
-
I'm guessing it is some type of rear sight . It looks to mount on the side of the weapon in the orientation shown in the last picture . I would guess it is non-USA and is for something like a grenade launcher / bazooka / mountain gun type weapon .
Chris
-
Agreed .......................very Eastern European feel to it and not to disumular to AK MG's rear sights.
Some one will know and have loads in their bottom draw!!;)
-
The sight goes from center 0 to 20 out to flat side. then back past 0 to 0 on the knob side. it is very well made. Thinking it is just part of a sight for left an right only? Only I would find the off type parts.
-
Ummm …. it may be a casting mark , but I see a zero , 4 lines , a long line with a 10 split on it , 4 more lines , then a long one with a split 20 .
Chris
-
Chrs you are correct. Did some cleaning with a cotton swab an that is the right numbers.0- 10 - 20. must all be horizontal numbers
-
No , I think it may pivot left / right via the hole up front and a screw on the weapon . Could be mounted solid and the front may do windage . I think it mounts with the knob down and these are elevation markings . The front sight may have an up/down adjustment to set the zero or it could be in a fixture this part mounts to .
Chris
-
Yes you could be right. so far not able to match it to any other parts
-
Japanese Type 96 or Type 99 LMG rear sight?
-
3 Attachment(s)
Finally some light, here's a type 99 for example...
-
That is indeed what it appears to be . I would now guess the "10" spot is really a zero and the "20" next to the knob is missing its "2" because of the housing's slope .
Chris
-
Yes that would be it so far
