PURCHASE ADVICE: YUGO SKS Welded on muzzle break

I have been looking for a Yugo ADVICE: YUGO SKS which are hard to come by here in Califonia because you can not own one with a Grenade Launcher. They get around this by either drilling holes in the launcher to make it into a muzzle break, replace it with a fabricated Muzzle Brake, or a solid chunk of metal to keep it 922R compliant.

The one I found they took a bit further, rather then screw the new Muzzle Brake on and repin it, they partially welded it in place, maybe 40%~50% around the barrel. (see pictures below)

I'm torn on this one I have been searching for a Yugo SKS for a while, this one is $500.00, since I can't own a grenade launcher in CA, it doesn't bother me to have a muzzle break as long as everything else is there. What worries me is the welding of it to the barrel, this has had to have compromised the metal, you can see that the weld is well done, meaning the weld is deep. Don't know if it worth $500.00 with the weld either.

Would love to hear your thoughts as a point of reference Yugo go for $700.00 to $1200.00 here in California.

Thank you in advance
Bill

Attachment 111108Attachment 111109

I can actually speak from experience with this one...when we did something like that here it in fact caused the barrel to banana towards the weld. It was a sight that was welded onto a 740 Remington and the barrel took a decided upward curve so it required straightening after. That one may shoot downward now.

Quote:

---

Originally Posted by browningautorifle

I can actually speak from experience with this one...when we did something like that here it in fact caused the barrel to banana towards the weld. It was a sight that was welded onto a 740 Remington and the barrel took a decided upward curve so it required straightening after. That one may shoot downward now.

---

Jim, Thanks for the information and that would make sense. I'm guessing this is common here in California. I found a post from Aragorn243 (Steve) where he had a SKS welded like the one may buy. I've been researching and it seems this is supposed to be done by California law? I'm not sure because a show I go to two years ago, I should have bought it then, was moding the by tuning down the grenade launcher and repining them, no welds, so I'm not sure.

How about just cutting it off? I think that's the route I'd go.

If you can fold the bayonet up and lock it in place, I would go for it at $500.

My friend has a Yugo with a welded muzzle brake and he can fold up and lock the bayonet in place.

Is it correct for a Yugo? Not really, but you still have a great gun and when the California laws change, I believe you can have a good gunsmith remove it.

Yes, it can be removed with some care.

Quote:

---

Originally Posted by Singer B

and when the California laws change

---

One can only dream :) I'm going to pick the rifle up next Saturday. I was going to go today but when I went to get my COE paperwork I notice my COE had expired.

---------- Post added at 01:02 PM ---------- Previous post was at 01:00 PM ----------

Quote:

---

Originally Posted by rcathey

How about just cutting it off? I think that's the route I'd go.

---

I would change to the C&R status of the rifle if I went that route.

I have one of these. We just shot it at 300 yards and with GECO ammo, it was darn accurate, first shot from a cold barrel was an X at 3:00! It did have a tendency to string a bit, not really sure if it was the rifle as two newbies were shooting it. Funny story, I bought it from a friend and the FFL guy calls me months later. Doesn't want to talk on the phone but wants to meet me at a gas station. OK guy needs cash, has a deal for me, whats up? Anyway long story is he mis-remembered the rifle and thought he did all the paperwork on a M59/66 WITH a grenade launcher. Was sure he was going to loose everything, Feds were on their way etc. Calmed him down and showed him pics and that everything was above board. I just had to put a Murry's gas diverter valve on mine as it was short stroking. Also a spring firing pin and a trigger job. Still too heavy and I doubt I'm going to stick someone rather than shoot them, but as a 10 shot legal semi-auto with plenty of punch, I'm keeping it.

Dave

Yes, you can legally purchase or transfer the Type 59's in California. They need to be pretty much original with a standard stock (no aftermarket pistol grip) and standard 10-round magazine.

Quote:

---

Originally Posted by Steve762

Are standard Type 59 SKS's ie Chinese/Russian allowed and available in CA???

---

I already have two Russan and three Chinese so I was looking for a Yugo or Romanian, (would never be able to afford a North Korean). Yes, unmodified you can own the Chinese and Russian. For the Yugo you need to have the grande launcher removed and something, like a break, welded in place.

Quote:

---

Originally Posted by Wineman

I have one of these. We just shot it at 300 yards and with GECO ammo, it was darn accurate, first shot from a cold barrel was an X at 3:00! It did have a tendency to string a bit, not really sure if it was the rifle as two newbies were shooting it.

---

I ended up buying it, I couldn't find one near the price he was selling it. I took a look at it during the transfer the things I didn't like is it was the stock lightly sanded not enough to remove any markings of change the profile, BLO was used to reseal it AND the receiver housing (cover) has been changed to an after-market house for a scope and a Tech Sight TS100 Aperture sight has been installed. SO I will be looking for a new cover and removing the Tech Sight it's not drilled and tapped into the gun, it not invasive, its just not my thing.
https://www.milsurps.com/images/impo...1282x300-1.jpg

USA, I had a Tech sight on a "Liberty Training Rifle for Appleseed" based on a M795 Marlin. The receiver is pretty soft on these and I had a dickens of a time getting the rear sight to stay on. That and the massive amount of left windage (twisted barrel???) made me scrap it for a scope. Loved the sight and sight picture. On a SKS, the sight radius is pretty short but at least with the M59/66 you can put up the night sights on the back and get a better notch, the front is too big. I have my SKS about as good as it can be for what it is, but it would have been fun to toss practice grenades. The Swiss Stgw 57 has a rubber rear stock that was designed as a recoil absorber for launching their giant "carrot" rifle grenades and not spit the stock. I did do a pretty heavy cleaning of the chamber with JB paste and a cleaning patch wrapped on a brush driven by a drill (put a drinking straw around the rod at the back of the receiver as the trunions are sharp as razors) to get the gunk that had built up over the years out. Seems OK now, just need another extended day shooting it to check. My bolt carrier cover looks like a thousand mice on ice skates had a winter party. I wish I owned a sand blaster... Enjoy

Dave



Dave

Quote:

---

Originally Posted by Wineman

I wish I owned a sand blaster...

---

If you live anywhere San Diego I can help you out with that. Mines not great but it works for small stuff, I need a bigger compressor.

USA,

I don't but my dad is near Temecula. I get down a couple of times a year. He is retired Navy Reserve (he got a trip to Kuwait 29 years ago at 55). You have probably passed each other at the Pendleton PX.

Dave