Printable View
I have seen several pictures of British L1A1s that appear to have been rebuilt for war reserve before being sold off in Europe, and a number of TMH assemblies in America that look to have been rebuilt at least once in the past. However, among these I can only recall seeing one example (a TMH in America) that appeared to have FTR markings.
Was there a marking protocol for FTR or base workshop rebuilt L1A1s in British service?
While we wait for the knowledgeable to pitch in, I have seen a couple of rifles marked with a discreet FTR on the TMH, but these were service reworked (in house, or contractor, I don't know), this would have been carried out and so marked, in the 1970's I would assume?
But I don't think rifles refurbished for war reserve were marked with FTR in the late 1980's or early 1990's... Never seen one anyway.
Refurbished at considerable cost by Parker Hale .... Then sold for peanuts!
Interesting.
In my time as an armourer I don't recall ever seeing 'FTR' on an L1A1, not to say that it didn't happen.
We certainly saw a high turnover of rifles, the replacements being base workshop refurbishments, in BAOR anyway.
Unlike the Lee Enfield No 4 Mk1 and 1*'s that underwent FTR, which effectively upgraded them to different models, Mk1/2 and Mk1/3, the L1A1 refurbishment din't fundamentally change the weapon it only brought them back up to original spec.
Speak of the devil...look what showed up in my email this morning...go to the eighteenth picture:
DSA SA58 FAL L1A1 Type 1 Early DS .308 7.62mm Trilux Aussie UK - Semi Auto Rifles at GunBroker.com : 899528753
Perhaps my question is more correctly "were L1A1 rebuilds mostly done at base workshops or other non "factory" facilities (therefore not a true 'FTR'?), and if so, were they normally marked in any way?"
Thank you for posting link. Learn something new every day. I would guess that most rebuilds would have been done at base workshop in BAOR or at the Workshops in Warminster, sorry can’t remember names or numbers, though no evidence to support this.
The FTR engraving looks very similar, in depth, style etc to the numbering which would of have been done at manufacture, doesn’t explain anything though. On Enfields the FTR mark was usually identifiably different to the original manufacturers markings, does not prove anything in this case though. On the L1A1 the master number was on the body.
A couple of unsolicited observations re this rifle, based on the photos.
The body hinge pin is in backwards, is this affecting the safety function of the weapon?
The pin for the flesh eliminator key is missing. Is the flash eliminator fitted correctly?
Hand guard screw in backwards, for a British weapon any way, might explain cracked hand guards.
Needs a dam good clean, with this level of care what else has the owner neglected to do?
The breech block should be serial numbered to the rifle, I am unable to see any number at all.
The serial number on the carrier does not match anything.
Whilst the add does say it is a build up from various bits, the lack of matching serial numbers is a real big red ***. Gauging will be critical to ensure safety prior to any firing. Good bargaining chip.
From the photos I would say that this rifle has been assembled by someone who really doesn’t know what they are doing or doesn’t care.
I'm stirring the old grey matter to remember the rifles I saw FTR marked.Quote:
Originally Posted by BigBadDog
The OP mentioned the small FTR on the TMH and that's what rang a bell with me. I'm 90% sure they were British BSA manufacture rifles, but it was 10 years ago now.
The problem with these questions is they often only lead to even more questions!
Did BSA ever carry out an L1A1
re-furbishment programme, perhaps for onward sale?
Could the FTR markings be specific to replacing / re-furbishment of the TMH?
The only private contractor I'm aware of is Parker Hale, who carried out an in depth rebuild of thousands of rifles towards the end of their service lives.
Unfortunately, while information regarding inch pattern contracts is widely available, with Australian rifles (the Canadians not selling or gifting any numbers to foreign players), information regarding British rifles (foreign sales/ gifting) is very patchy and largely second hand in nature.
Re the No4, MK1 rifles were refurbished as MK1's post war and FTR marked, as part of the huge No4 stockpile overhaul.
I can state that the war reserve refurbishments WEREN'T 'FTR', in fact the refurbishment is sketchy to say the lest (I have two of them) The rifles were full of Australian parts, there are cracks in the top cover and it looks like someone spray painted the metal parts of handguards as you can see the over spray. on the Nylon 66.
FTR has one meaning only Factory Thorough Repair, where the rifle was returned to the factory to be gauged and rebuilt to 'New Standard', this could mean the replacement of bodies, TMH, Barrel Assemblies and anything else that needs replacement to ensure its within 'Factory New' Specs.
There were overhaul programs within the defence forces at Base Workshops, where they would rebuilt the rifles, replacing components and ensuring the rifle meets the standards set down in EMER D118. They could replace barrels and in New Zealand they also replaced Bodies, but at the end of it, the rifles would meet EMER D118 or EMEI D258 (Australian) standards. They weren't marked unless a modification called for it, they just looked very pretty. In the last year of L1A1 use in New Zealand 1 Base Workshops was overhauling 100 rifles a week IIRC
https://www.milsurps.com/images/impo.../iHe6x7L-1.jpg
https://www.milsurps.com/images/impo.../LVGGBMC-1.jpg
https://www.milsurps.com/images/impo.../6nMuyfz-1.jpg
Australian FTR Marking
https://www.milsurps.com/images/impo.../6BKyOs8-1.jpg
Hi Kev, hope all is well with you mate?
The inch pattern encyclopedia is in the house!
I assume New Zealand did the same as the UK and refurbished L1's at the tax payers expense, then sold them off cheap!
I'm wracking my brain Kev, I'm sure I've seen the marking on a few BSA TMH's.....
Very small marking, from memory, on the right hand side.
I do hope you're still hanging onto your collection mate, the NZ government seem hell bent on the destruction of centre fire semi's.
I think your right, I think Ive seen the marking your referring too, but cant find the image. Not sure what it means and would have to look at it in context to the whole of the rifle. The FTR marking, as it is on the SMLE/No.4/Bren etc was no small feat. The weapon came out of the Factory 'As New', presumably for less than the cost of a new rifle. Generally you will find only early rifles were FTR, because of issues with Bodies being 'soft' or 'stretching' in very basic terms. In British service as Peter L has pointed out the past where the body needed to be replaced, it was a factory job. Although there are clear instructions on how to replace and mate up the body and barrel in the REME instructions, if you had the correct fixtures at a Base Workshops. At this stage Ive only found one Enfield FTR Date and that's 1967, for Australia Ive been 1967. I know Lithgow Museum have Ledgers that detail those rifles that have come through their FTR programs. The original s/n details are crossed out and a reference is put in to the FTR ledger. I would think Enfield and BSA would also have s/n ledgers.... I wonder what happened to those?..... Someone please find them!
On that front, I have what's clearly a replacement TMH (UB58 serial number on a 1966 Enfield TMH) and it has no non-standard markings at all...not even the little "4" and "7" upgrade marks on the stock tang.Quote:
Originally Posted by mrclark303
Looks like it was a brand new TMH...no evidence of a removed serial number, just a nice deep number that's polar opposite from the shallow markings that seemed common to BSA-made rifles.
I've had a similar rifle come through my hands a few years ago, I came to the decision that the TMH might possibly have started life as as a Canadian Arsenals TMH, due to the total lack of any NATO stock markings.Quote:
Originally Posted by enbloc8
I believe the Canadians never marked their TMH's??
Re the deep numbers, I recall our Peter mentioning that reissued TMH's had the original S/N number panel machined out in an oval panel, with the replacement S/N added in its place as a base workshop repair.
I've two rifles with re-numbered TMH's done exactly this way.
I don't recall seeing UK FTR marked rifles but what we did see a lot of, in the Far East were Base Workshop details stamped into the butts, such as BWS and date or 13FWT ( 13 Field Workshop Taiping or 2 FWM and date code from the big mixed Aust NZ and Brit workshop. Same as Hong Kong.
There wasn't a move to keep L1A1's as war reserve stockpiles or Mob Stores because the 3 year (it became 4+ years.....) deployment of L85's made war reserve stocks of L1A1's unnecessary. As the main report said in effect '.......who wanted to buy L1A1's when there were AK's for free and M16's as cheap!
Here's the British FTR marking. Enfeild did a batch in 1967
https://www.milsurps.com/images/impo.../6VhHZWL-1.jpg
Ha Ha........saw that label Building B54 Donnington, made me laugh. I had the pleasure of being in there last year, really tight security as you would expect..........floor to ceiling with weapons all boxed a massive WW2 building akin to a hangar, and MOD Police all over the place watching every move you made. Its termed the SECURE building on site.
Like I said, I never saw or was aware of FTR'd L1A1's. Notifications such as this would come through in a little restricted booklet titled 'information for Quartermasters' or within the Misc Instructions or Information part of the EMER's. It does seem strange that the example still has the turreted type body locking catch lever.
Not if it were assembled after release from parts...Quote:
Originally Posted by Peter Laidler
its a photo of an American assembled L1A1 made from parts fitted to a compliant "American" body. The TMH is the important piece of information :thup:
Well done for finding that pic Kev, starting to think I had dreamt it! I recall the small FTR marking on the TMH, clocked it on two BSA examples (I think), wish I had taken pictures!!!!
---------- Post added at 12:53 AM ---------- Previous post was at 12:50 AM ----------
Bee Hive locking lever, good spot Peter, a rare item to find these days...