The pin that the ejector pivots on sheared off.
First any suggestions on how to the remainder out. Nothing is exposed, sheared clean off. Should I drill it out?
I cannot find that pin with any parts anywhere. Any one have one?
Thanks, Don
Printable View
The pin that the ejector pivots on sheared off.
First any suggestions on how to the remainder out. Nothing is exposed, sheared clean off. Should I drill it out?
I cannot find that pin with any parts anywhere. Any one have one?
Thanks, Don
Is this a MkII (1905) Ross? If so, the following applies. If not, the other models are different.
Don't drill it out. It's not stuck, it's captive. It pushes down through the bottom into the trigger pin bore in order to let you remove and install the ejector and spring, and the trigger pin holds it in place all other times. Push the trigger pin out and you'll see its bore. Then just tap it down from the top with a small punch to remove and install the ejector (it sounds like it shearing off probably took care of that for you), then tap it upward from the bottom to remove the pin when the ejector has been removed.Quote:
Originally Posted by eliwhitley
I might, I'll check and get back to you.Quote:
Originally Posted by eliwhitley
-Drew
I took some pictures while I was checking to see if I had it, so here's this for posterity.
Push the trigger pin out, the trigger assembly comes out afterward.
https://ibb.co/c13V7qz
Attachment 114507
The ejector pin bore is drilled through, so after the trigger pin is out, the ejector pin can push downward, which will free the ejector and spring (but it can't be removed through the bottom).
https://ibb.co/wYwKH34
https://ibb.co/yqtzHk3
Attachment 114509Attachment 114508
After the ejector and spring has been removed, you can drive the pin upward to remove it from the top. Excuse my crooked punch, it's had a rough life.
https://ibb.co/q04MZp3
https://ibb.co/FwYBrPb
Attachment 114511
Attachment 114510
If it's a 1905 (MKII), here's your pin. PM me you address.
https://ibb.co/n7jSXxy
Attachment 114512
Hope that helps.
-Drew
Thank you so much. That's what I needed to know. The pictures are great!
Don