Originally Posted by
mrclark303
Good point Simon....
The Anglo Custom rifles had some quite extensive modifications to the bolt and carrier, with a few modifications to the receiver.
Safety sear removed, corresponding sear trip spur milled off the carrier, pin added to the front of the Carrier, that fits in a milled slot in the reciver, just below the piston hole.
A pin welded into the front right of the reciver Carrier trackway, adjacent to the breech, with a small corresponding cutout in the Carrier.
The bottom of the bolt is milled away too, there might be additional reciver mods made so only the adjusted bolt fits.....
The original idea being that a standard L1A1 bolt and carrier won't fit. I would at least send clear pictures to Peter. The Walther barrel is another potential issue, I would want to check fit a liner.