5 Attachment(s)
Help with Sarco Bren project
Quote:
Originally Posted by
Joe H
Thanks Peter for the detailed history.
As Vincent noted they do come with the kit but just like you I'm wondered why they were removed. Maybe they just couldn't trust the guy with the torch.
After looking it over, the re-weld may not be as bad as I thought. I have a MGS MK I demilled receiver for donor pieces. They should work well. The pieces will need some cosmetic weld & grinding to match the MK II body. Enough of the bottom of the barrel nut area on the front section is still in place so it can be used with a spacer for location of the front reweld. The ejector block and locking shoulder areas are undamaged. The heel section from my MGS demill will provide an undamaged pin hole and overlap for the rear weld.
Joe
Guys, sorry to be so late to the discussion, but just purchased a Sarco L4 Bren parts kit and it looks identical to what you shared Joe. I'm just starting to realize what a project fixing this thing would be and am pondering my options. Any advice you can offer would be GREATLY appreciated. I'm attempting to share photos below!
I've tried contacting "Project Guns" but not sure if he's still doing this, and I do not have spare receiver bits to replace the really damaged torch cut areas. Is this just scrap metal until I can find some credible alternatives?
Attachment 112270Attachment 112271Attachment 112272Attachment 112273Attachment 112274