Search:

I have one that is dated 12/09, barrel and receiver are original. It went through a rebuild and had a NS bolt installed. I have shot it with some light 150 fmj’s with no problems. One of these...

Needle file, then lap it. Won’t cost much if you have the tools.

Get a can of this : Renaissance Micro-Crystalline Wax. Good for wood and metal.

Thanks for looking.

Springfield 1322192

Thanks,
Steve

FS: USMC O-66 Harrington & Richardson M-1 Garand SECNAV trophy rifle. This comes with award papers. This rifle was un-issued since the rebuild in 1966 at the USMC depot $2500.00 + shipping to your...

Yes, anytime the value is above $100

I have searched for a spare extractor and failed to find one.

I have 40 Dominion 11mm Mauser cases that have been made into 43 Spanish. They may also work for 44-77 or other cases.
I got these with a lot of brass from an auction and don’t need them.
Price is...

This is for 4 M-14 mags marked KMT in execllent condition. PM me for pictures, price is $140.00 shipped to anywhere in the lower 48 that you can legally own them.

Cheers,
Steve

I have 48 once fired RCC 280 Ross cases for sale. PM me with your preferred mode of communication for pictures. Price is $200 shipped to lower 48.

Cheers,
Steve

Here you go: admin@rossrifle.com

That’s a good shooting rifle. Are you going to try cast bullets?

I got the pic's posted to the gallery that is linked in the first post. I will post more from 200 yards when I get a chance to shoot again and some chrono data I hope!

Range report with cast bullets. Final load was 17.5 grains of Alliant 2400, Saeco #305 sized to .312”. Shot at 100 yards, 5 shots that a quarter will cover.

All,
I have a barrel that was de-mil’d by a light torch cut to the chamber. It is stripped, measures 28” oal. Would be good for a wall hanger or you could sleeve the chamber.
$50.00 plus shipping...

All,
AGB-1, Tommy Litton left the range @2025 on 10NOV22 after a 3 week battle with cancer. He was an avid collector of military weapons and a history buff. Tommy was especially fond of Ross...

Great buy!

ALL,

I have successfully removed the sights from a Mk.II***. I used a USGI M-1 carbine front sight removal tool from Matrix Precision to remove the front sight base on 2 barrels. The first one...

What size are the bullets/alloy? If you want to get the best accuracy out of that rifle you will have to get some .461-.462" bullets. A chamber cast will tell you what you need.

Try something lighter than CLP to dissolve the crud. I use Ed's Red for most stuff and works well. Kerosene, ATF or Kroil may work. It may take some good pul to get it apart.

I got a sporterized rifle out that is pinned. The bolt came apart easily. I did notice that on the threaded part of the bolt head that there is a small drill spot in the same location where the...

Is it pinned? Sometimes it is hard to see.

I believe that is a sight cover made by P.J. O'Hare.

The repro Malcolm scopes are pretty good. I have a 6X on my .22lr Low Wall and the 3X on the ross. The glass is quite clear, but the reticle is a little on the thick side for my liking. The mounts...