-
Legacy Member
Oil Blackening
I thought I read an article on this forum on Oil Blackening, but I cannot find it. Does anyone know how to find it or how to do it the proper British gun maker's way?
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
-
-
09-01-2013 04:53 PM
# ADS
Friends and Sponsors
-
FREE MEMBER
NO Posting or PM's Allowed
Is this it?
Redneck oil blackening
I tried the BBQ/linseed oil rubdown once on an old magazine. The follower came out nice and jet black, the magazine more of an ugly brown. FWIW, it seems a pretty durable finish though. Ever try to clean your BBQ? That black "finish" is tough stuff
-
-
Legacy Member
Not sure on the British method, but you can do a pretty good job heating the part and quenching in used motor oil from a diesel engine.
-
-
That's very basically what we used to do. Get the parts to a deep cherry red and quench in an oil bath. I suppose some oils are better than others but old used filthy engine oil was the most common. You'll need to do it a few times - sometimes as many as six times to get a good deep lustre.
In New Zealand, one of the blokes taught me another method called 'blanket blacking' where the part was taken to cherry red and wiped over an old wool blanket. Usually screw heads were best treated with this method
But PLEASE.........., keep a fire blanket handy
-
-
FREE MEMBER
NO Posting or PM's Allowed