-
Legacy Member
MP-28 buttstock
The good news is it doesn’t have any cracks. The bad news is it’s filthy and badly beaten up.
Attachment 64891Attachment 64893Attachment 64892Attachment 64894Attachment 64895Attachment 64896
Attachment 64897
I am thinking I would like it to be cleaner, but I don’t want to go beyond that. So I am looking for some help from the woodworking experts. What’s the best way to remove the filth while keeping the patina? The small area around the cartouche looks pretty good. How do I make the rest of it look like that?
Information
|
Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current. |
|
Last edited by Vincent; 08-24-2015 at 10:54 AM.
-
-
08-24-2015 10:51 AM
# ADS
Friends and Sponsors
-
Advisory Panel
You can use the standard liquid stripper here and it will do magic. Things like acetone and varsol will take a while and you may saturate it a bit. You could try them on a rag though if you have them...I'd use a liquid striper, maybe a steam gun. That will also lift some of the dents...which I'm sure you aren't adverse to.
-
The Following 2 Members Say Thank You to browningautorifle For This Useful Post:
-
-
Legacy Member
Okay then. Stripper it will be.
It’s in pretty sad shape, but MP28 parts are not thick on the ground here.
-
-
Advisory Panel
As a gun they're pretty forgiving so this should work out well. Besides, you've shown us you can rebuild it...this ought to be good. You do have the rest?
-
-
Legacy Member
No. I don’t have all the rest, yet. It’s another one of my part-by-part projects.
I think the cartouche is Anciens Etablissements Pieper. There’s also a Liège proof mark on the magazine housing.
-
-
Advisory Panel
Back in the '80s, a good friend of mine had one here. It seemed a bit heavier than the MP 40 say, but I guess it would be functional. Good luck on the build.
-
-
Just illustrates the Lanchester ancestry doesn't it? But from that came the Sterling series although Patchett would never admit it!
-
-
Advisory Panel
-
-
Legacy Member
Yes, the MP28 is clearly the ancestor of the Lanchester. There’s even some parts interchangeability. The early Lanchester barrel seems to be identical to the MP28 barrel.
My Lanchester firing pin broke. It took a little fitting to get the MP28 firing pin in the Lanchester breach block and to my surprise it increased the rate of fire noticeably.
-
Thank You to Vincent For This Useful Post:
-
Legacy Member
I thought the Lanchester was basically a reverse engineered copy of the MP28? i.e. an SMG was desperately needed in 1940 and the MP28 was known to work.
Slight change of subject; I was pleased to pick up a 'Lanchester specific' WWII Admiralty contract 1907 Pattern bayonet for my Lanchester yesterday. They are distinguished by the fact that they are marked 'WSC S294' on the ricasso and have a blackened blade.
Nature and nature's laws lay hid in night;
God said "Let Newton be!" and all was light.
-
Thank You to peregrinvs For This Useful Post: