Holes in M1A1 Stock ?

[Brian Dick]

That could be repaired fairly easily by plugging and if done carefully, you'd barely be able to see it.

Information

Warning: This is a relatively older thread This discussion is older than 360 days. Some information contained in it may no longer be current.

[browningautorifle]

could be repaired fairly easily by plugging

If the plug was cut from cross grain that matched...yes... The selector routing could be sorted too.

[rcathey]

If the plug was cut from cross grain that matched...yes.

A plug cutter is a wonderful tool any piddler should have:
https://m.harborfreight.com/4-piece-plug-cutter-set-6956.html?utm_referrer=direct%2Fnot%20provided

A dowel rod would be end grain and it’ll never match right. The plug cutter is the only way to go especially when they’re this cheap.