+ Reply to Thread
Results 1 to 10 of 10

Thread: BSA-Sparkbrook SMLE

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member dg2004's Avatar
    Join Date
    Jan 2018
    Last On
    03-20-2024 @ 08:13 PM
    Location
    NH
    Posts
    26
    Real Name
    Dan
    Local Date
    03-28-2024
    Local Time
    04:16 PM

    BSA-Sparkbrook SMLE

    I received this rifle today.

    It's a BSA-Sparkbrook SMLE. It was made in 1906 as a SMLE Mk I*, and sometime later converted to SMLE Mk III. You can barely see the overstamped star. I had to hold the rifle at an angle to the light to see it. It took a bit of work, but I got the overstamped star in a picture.

    The metal parts except for the barrel match. The forend bled a little cosmolineicon when I handled the rifle. The bore needs cleaning but is rust free. There is rifling. I have not looked at with my bore scope, but to my naked eye it looks near mint except for some fouling/dirt I need to finish cleaning out.

    There is rust, but all on external parts.

    I have not taken anything apart beyond removing the handguard.

    The serial number doesn't line with the BSA-Sparkbrook block according to Skennertonicon. If I remember correctly, BSA-Sparkbrook was Q, and this is R.

    It's very hard to see, but it looks like the two opposing R mark is on the top of the receiver. I didn't see this in the pictures the seller took. I almost missed it when I first looked over the rifle. The picture I have of it is the best one I could take. It took a bit of work with the light.

    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. The Following 3 Members Say Thank You to dg2004 For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Legacy Member tatou's Avatar
    Join Date
    Sep 2008
    Last On
    11-12-2023 @ 04:55 PM
    Posts
    281
    Local Date
    03-28-2024
    Local Time
    03:16 PM
    I have two of them and indeed, both originally had (have) a Q prefix.
    The second one was renumbered when it was updated to be sent to Ireland in the 20's but the old Q serial is still visible.
    My guess is yours was scrubbed, we can see marks in your last picture.
    In the early years of the Sht LE's the barrel was still considered the prime component of the whole rifle... so if the barrel was changed, his serial number was stamped on the receiver.
    Obviously your barrel was changed again some time later. Maybe when it was ''upgraded'' to Mk III and a charger bridge installed.
    Normally serial numbers would have again been re stamped to match ... but who knows with this one.
    I learned a while ago to never say never with Lee Enfields.

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Today @ 12:25 PM
    Location
    Y Felinheli, Gogledd Cymru
    Posts
    2,526
    Real Name
    Alan De Enfield
    Local Date
    03-28-2024
    Local Time
    08:16 PM
    Quote Originally Posted by dg2004 View Post
    It's very hard to see, but it looks like the two opposing R mark is on the top of the receiver. I didn't see this in the pictures the seller took. I almost missed it when I first looked over the rifle. The picture I have of it is the best one I could take. It took a bit of work with the light.
    Just be aware that the 'back to back R' marking means the rifle was condemmed (not because of the barrel because that could be changed, it was normally because the body / action was beyond limits). which is why it was stamped on the body so it could nor be missed.

    There was also 'back to back R' with DP alongside it which meant is was a rifle with an unsafe barrel & only suitable for DP use.

    See items 39 and 40 on the attached extracts :
    Attached Thumbnails Click image for larger version

Name:	Enfield Markings.jpg‎
Views:	97
Size:	2.04 MB
ID:	125991   Click image for larger version

Name:	Enfield markings 2.jpg‎
Views:	94
Size:	1.25 MB
ID:	125990  
    Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...

  7. #4
    Legacy Member dg2004's Avatar
    Join Date
    Jan 2018
    Last On
    03-20-2024 @ 08:13 PM
    Location
    NH
    Posts
    26
    Real Name
    Dan
    Local Date
    03-28-2024
    Local Time
    04:16 PM
    Thread Starter
    Quote Originally Posted by tatou View Post
    My guess is yours was scrubbed, we can see marks in your last picture.
    Oh, thanks! I missed those marks. After reading, I took another look at the picture, and see the scrubbing marks.

    I noted that the bolt had been scrubbed and restamped. The flat part with the numbers looked a bit too big, and there is a faint number off to the side.

  8. Thank You to dg2004 For This Useful Post:


  9. #5
    Legacy Member dg2004's Avatar
    Join Date
    Jan 2018
    Last On
    03-20-2024 @ 08:13 PM
    Location
    NH
    Posts
    26
    Real Name
    Dan
    Local Date
    03-28-2024
    Local Time
    04:16 PM
    Thread Starter
    It looked like the #40 stamp based on the picture I took.

    I took another look at the rifle, and I'm honestly not sure if it is the #40 stamp. I see some evidence of scrubbing in the area. It could be the #40 stamp but I'm less certain than I was before.

    Based on the powder fouling that's been coming out of the bore, someone shot this gun. Of course, I have no idea what load the person used or what happened.

    It would be a real shame if it was the action/receiver being out of limits. Anything I should check?

    Thanks!

  10. #6
    Legacy Member dg2004's Avatar
    Join Date
    Jan 2018
    Last On
    03-20-2024 @ 08:13 PM
    Location
    NH
    Posts
    26
    Real Name
    Dan
    Local Date
    03-28-2024
    Local Time
    04:16 PM
    Thread Starter
    Quote Originally Posted by dg2004 View Post
    Anything I should check?
    On further thought, I realized the answer is most likely "no", or possibly "get it to a gunsmith", but if there is something to check, I'll do it.

  11. #7
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    Today @ 11:11 AM
    Location
    The wild west of England
    Posts
    3,401
    Real Name
    Mr Clark
    Local Date
    03-28-2024
    Local Time
    09:16 PM
    Get in 'thoroughly' checked and gauged by a gunsmith who knows Enfield's prior to shooting.

    If it turns out to be a non shooter, shorten the firing pin and pop it on the wall as a lovely collectable....

  12. #8
    Legacy Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Today @ 12:25 PM
    Location
    Y Felinheli, Gogledd Cymru
    Posts
    2,526
    Real Name
    Alan De Enfield
    Local Date
    03-28-2024
    Local Time
    08:16 PM
    I'm not sure there are many gunsmiths who have the knowledge, the experience, the tools or even know what the original specifications were.

    Assuming it is the body that was declared 'condemned' it could be worn locking lugs, the hardening of the locking lugs penetrated, body stresses / stretched / twisted and a number of other possibilities.

    Do we know a smith who knows what the original hardness was on the lugs ? has he the equipment to test them ?

    To quote Peter Laidlericon (out of context, as he was talking about markings on DP rifles) "I’ve been an Armourer for a couple of years and while I or your local gunsmith could examine one and give it a bright clean bill of health, would YOU trust it. NO, I wouldn’t either!"

    It was marked as being condemned by someone who knew why it needed condemning.
    If the 'fault' was repaired then why wasn't the mark removed or cancelled ?
    If the fault has not be corrected, would you trust the rifle ?
    Last edited by Alan de Enfield; 05-04-2022 at 05:11 PM.
    Mine are not the best, but they are not too bad. I can think of lots of Enfields I'd rather have but instead of constantly striving for more, sometimes it's good to be satisfied with what one has...

  13. Thank You to Alan de Enfield For This Useful Post:


  14. #9
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    Today @ 11:11 AM
    Location
    The wild west of England
    Posts
    3,401
    Real Name
    Mr Clark
    Local Date
    03-28-2024
    Local Time
    09:16 PM
    Spot on advice Alan.....
    .303, helping Englishmen express their feelings since 1889

  15. #10
    Legacy Member dg2004's Avatar
    Join Date
    Jan 2018
    Last On
    03-20-2024 @ 08:13 PM
    Location
    NH
    Posts
    26
    Real Name
    Dan
    Local Date
    03-28-2024
    Local Time
    04:16 PM
    Thread Starter
    Thanks Alan! That's a good point.

+ Reply to Thread

Similar Threads

  1. CLLE Sparkbrook 1* - armourers put together?
    By Sparkbrook in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 7
    Last Post: 12-01-2018, 07:51 AM
  2. Strange rear sight location on a 1895 Sparkbrook SMLE
    By louthepou in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 9
    Last Post: 01-03-2017, 05:51 PM
  3. BSA - SPARKBROOK Mk I*
    By tatou in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 11
    Last Post: 12-24-2016, 03:21 PM
  4. Rarity of 1908 BSA Sparkbrook MkI*.
    By Anzac15 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 14
    Last Post: 08-15-2013, 07:52 AM
  5. Sparkbrook Help
    By Lance in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 09-27-2011, 01:42 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks