+ Reply to Thread
Results 1 to 9 of 9

Thread: My 1st Carcano

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    hcso617's Avatar
    Join Date
    Oct 2010
    Last On
    11-12-2018 @ 09:44 PM
    Location
    TN
    Age
    64
    Posts
    31
    Local Date
    03-28-2024
    Local Time
    09:15 AM

    My 1st Carcano

    Mods, I wasn't sure where to put this, please move if appropriate. I purchased my 1st Carcano, a M91/38. The dealer wouldn't accept my scanned copy of my C&R, so I mailed a copy out today. This is a photo of the rifle I purchased. I will post up more when It comes in next week. I'm sure I'll have a bunch of questions. Anyone know where I can get the proper sling?


    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Senior Moderator
    (Milsurp Forums)
    Bill Hollinger's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 01:06 AM
    Location
    Pacific Northwest, Oregon
    Posts
    6,021
    Real Name
    Bill Hollinger
    Local Date
    03-28-2024
    Local Time
    08:15 AM
    Congratulations on your purchase. I am really looking at buying one.
    Bill Hollinger

    "We're surrounded, that simplifies our problem!"

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel smellie's Avatar
    Join Date
    Jan 2008
    Last On
    01-14-2019 @ 09:17 AM
    Location
    Virden, Man. Pop 3250, 4 miles from Wolverine's range!
    Posts
    632
    Local Date
    03-28-2024
    Local Time
    11:15 AM
    You're lucky that you live south of the razor wire, friend. You can get spare parts aplenty and some accessories quickly and inexpensively from Springfield Sporters. They have been re-sorting all their stock since setting up in business again, but their Carcano section seems complete. I think you can get to them at ssporters dot com.

    Back when we had The World's Longest Undefended Border, I found their products always as advertised and the service prompt and polite.

    One point: you WILL need CLIPS for your Carcano. Nice thing is that they ARE available and they fit, no matter what the calibre of the rifle: 6.5 and 7.35 clips interchanged 100%. The bad part (and isn't there always a bad part?) is that the things can be lost easily.... and they are expensive nowadays. For going in the field with a Carcano, I keep a strip of masking tape acros the clip slot in the bottom of the mag: keeps the clip from getting lost. On the range, I just let them drop into the bench.

    One point: a Carcano should aways be loaded from the magazine. It's a lot easier on the extractor that way.

    With my own short Caranos, I am getting good results with the faster powders. I think the swift kick helps the bullet to obturate better.

    Bullet and brass are available from Graf's in Mexico, MO, and Hornady and Prvi Partizan both load the ammo.

    The world today is looking better for Carcano shooters than any time in the past 40 years.

    Congratulations on the fine purchase; it's a nice-looking rifle. Just keep us posted as to what's up; lots of people starting to be interested in these now.

    And welcome aboard!
    .

  6. Thank You to smellie For This Useful Post:


  7. #4
    Legacy Member bearhunter's Avatar
    Join Date
    Oct 2006
    Last On
    11-02-2020 @ 03:00 PM
    Location
    Okanogan, BC
    Posts
    509
    Local Date
    03-28-2024
    Local Time
    08:15 AM
    x2 smellie. The clips are tough to find in my neck of the woods though. Getting them into Canadaicon from the US is now getting expensive. The really difficult clips (enblocs) are the ones used in the Steyr built 8x57 chambered carbines.

  8. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    hcso617's Avatar
    Join Date
    Oct 2010
    Last On
    11-12-2018 @ 09:44 PM
    Location
    TN
    Age
    64
    Posts
    31
    Local Date
    03-28-2024
    Local Time
    09:15 AM
    Thread Starter
    Thanks for the info, I have some clips and ammo that I've had for about 5 years. I'll keep you posted. Matt

  9. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    hcso617's Avatar
    Join Date
    Oct 2010
    Last On
    11-12-2018 @ 09:44 PM
    Location
    TN
    Age
    64
    Posts
    31
    Local Date
    03-28-2024
    Local Time
    09:15 AM
    Thread Starter

    Please help with rifle ID, I have been told a few different types

    Ok it's here and I have more information. This is what is stamped on the barrel (hex portion)
    Left side: GARDONE V.I. 1931
    Center: Beretta
    Right: 14811 with a circle and FF or FB in the middle

    The bolt tang top side is stamped: AD 8813
    bottom side: 2 (over) F1 or FI
    an O or 0 is also stamped on underside of bolt on rail

    When you remove the bolt there is a star stamped

    The rifle is 36" in total length, fixed front, adjustable rear sights with bayonet lug. Has a cleaning rod screwed in below the barrel, 16.5" long. I removed the butt plate I couldn't see anything. There are no import markings, or ammo type markings anywhere on this rifle. Rifling and bore look very good. There are a few other proofs on the barrel and stock but I can't really make them out, and I don't want to guess.

    I've had a few folks tell me I had a few different types, does this help. I can't take any other pictures at the moment.

    Thanks,

    Matt

  10. #7
    Legacy Member chuckchili's Avatar
    Join Date
    Apr 2010
    Last On
    02-13-2021 @ 04:23 PM
    Posts
    117
    Local Date
    03-28-2024
    Local Time
    09:15 AM
    Don't have much to add but that's a good looking rifle, that stock's woodgrain is awesome!

  11. #8
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    05:15 PM

    Carcano markings

    Quote Originally Posted by hcso617 View Post
    Left side: GARDONE V.I. 1931
    Worn or misread stamp, I think.
    That ought to be Gardone V.T. for Gardone, Val Trompia (Trompia Valley).

    Of course, 1931 does not match up with the date of build as an M91/38. Regardless of the theory (see below) one might reasonably suspect that, with the wartime emergency switch back from 7,35 to 6,5 a certain amount of "mix'n match" took place to use up what was in stock in the factory.

    Center: Beretta

    Right: 14811 with a circle and FF or FB in the middle
    Again, could be a worn stamp for PB = Pietro Beretta
    And the number could be (letter not number) I 4811. It's all very tricky without having the rifle in one's hands!

    The bolt tang top side is stamped: AD 8813
    That is the format for an Italianicon army registry number a.k.a matrix number. This is the number that was stamped on the completed rifle when it was accepted. The number is usally to be found on the left side of the barrel and on the butt. The series started new for each type of rifle, want from A0000 to Z9999 (25 letters - no J) then AA....AB... etc. At least, that was the theory. In practice there appear to have been considerable deviations and inconsistencies.

    bottom side: 2 (over) F1 or FI
    an O or 0 is also stamped on underside of bolt on rail
    Those are probably acceptance stamps

    Of course, I may have got it all wrong. Think of it as a first approximation!

    Patrick

  12. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    hcso617's Avatar
    Join Date
    Oct 2010
    Last On
    11-12-2018 @ 09:44 PM
    Location
    TN
    Age
    64
    Posts
    31
    Local Date
    03-28-2024
    Local Time
    09:15 AM
    Thread Starter
    Thank you Patrick, I had my teenage son look at the rifle with a magnifier, you are indeed correct on all counts. So with some research we have a 1931 M91/28 Moschetto Truppe Speciale (T.S) . My son verified all the corrections to the marks you reported. I believe the bolt is not original to the rifle but much older. He also found a small mark on the left side of the chamber, a stamped circle with some kind for crest? and a small square stamped with AS on the left side of the trigger guard. Thanks so much for the information. I have a few more questions;

    Is there a firing pin protrusion gauge (like the tool for a MN)?
    Where can I get a period correct sling, (I see a bunch out there for the type that mount to the side of the stock)

    Thanks again everyone, Matt
    Last edited by hcso617; 12-16-2010 at 08:14 AM.

+ Reply to Thread

Similar Threads

  1. 6.5 carcano
    By bvillars in forum Ammunition and Reloading for Old Milsurps
    Replies: 29
    Last Post: 11-27-2010, 07:04 PM
  2. Carcano Rifles
    By Aragorn243 in forum Italian Rifles
    Replies: 25
    Last Post: 11-05-2010, 03:53 AM
  3. Carcano M91/24.
    By A. F Medic in forum Italian Rifles
    Replies: 2
    Last Post: 09-28-2010, 05:38 PM
  4. Carcano question
    By powmia56 in forum Gunsmithing for Old Milsurps
    Replies: 10
    Last Post: 03-10-2009, 05:55 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks