+ Reply to Thread
Page 2 of 4 FirstFirst 1 2 3 4 LastLast
Results 11 to 20 of 38

Thread: N° 8 Mk I trainer fitted with an A. J. Parker 8/53 sight attachment

Click here to increase the font size Click here to reduce the font size
  1. #11
    Legacy Member Didier's Avatar
    Join Date
    Jun 2018
    Last On
    01-02-2024 @ 09:16 AM
    Location
    France
    Age
    58
    Posts
    26
    Local Date
    04-23-2024
    Local Time
    08:14 PM
    Thread Starter
    Quote Originally Posted by tr63 View Post
    PH No 5D was used for the No8 it did not use the threaded hole as used for the ejector on the No4 .It had a higher mounting arm than the PH 5 and used threaded holes on the left side of the receiver. One that was much higher then found on the .303 cal. No4 and the hole just in front of the safety . that is not found on the No4 .
    Thank you.
    So, if I got it right, the receiver of my No. 8 is already threaded to accommodate such a PH No 5D sight?

    Here are some better pictures:

    Last edited by Didier; 09-08-2021 at 02:36 PM. Reason: Photos added

  2. The Following 2 Members Say Thank You to Didier For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #12
    Legacy Member Didier's Avatar
    Join Date
    Jun 2018
    Last On
    01-02-2024 @ 09:16 AM
    Location
    France
    Age
    58
    Posts
    26
    Local Date
    04-23-2024
    Local Time
    08:14 PM
    Thread Starter
    Quote Originally Posted by Patrick Chadwick View Post
    - was it common for .22 LR Enfield trainers to undergo FTRs?

    Most definitely not. I have collected auction sales adverts of (almost) all No.8s offered here in Germanyicon for several years. I have never seen one marked with FTR before. The FTR UE 66 refers to a factory thorough repair at Enfield in the 1960s. See "the Lee Enfield Story" P.442.

    BTW. thanks to the FTR, that looks like a "very low mileage" No.8. You were lucky!

    Patrick
    I have found on the Internet another No. 8 from the same batch of 1966 Enfield FTR'ed trainers:



    This one is serial # A5938; mine is serial # A5685, which leads me to think that they might have been renumbered at Enfield - surely you will know whether there is such a possibility?
    Last edited by Didier; 09-08-2021 at 05:55 PM.

  5. Thank You to Didier For This Useful Post:


  6. Avoid Ads - Become a Contributing Member - Click HERE
  7. #13
    Legacy Member Mk VII's Avatar
    Join Date
    Dec 2008
    Last On
    04-21-2024 @ 06:20 PM
    Location
    England
    Age
    62
    Posts
    1,409
    Real Name
    James West
    Local Date
    04-23-2024
    Local Time
    08:14 PM
    Some, at least, of them, had a shorter windage arm with less adjustment (because with .22 you were not going to shoot with huge amounts of wind). Some appear to have used the standard PH5C one, which may have been clearup of parts on hand.

    https://www.rifleman.org.uk/PH_Service_sights.html#5A

  8. #14
    Legacy Member Didier's Avatar
    Join Date
    Jun 2018
    Last On
    01-02-2024 @ 09:16 AM
    Location
    France
    Age
    58
    Posts
    26
    Local Date
    04-23-2024
    Local Time
    08:14 PM
    Thread Starter
    Quote Originally Posted by Mk VII View Post
    Some, at least, of them, had a shorter windage arm with less adjustment (because with .22 you were not going to shoot with huge amounts of wind). Some appear to have used the standard PH5C one, which may have been clearup of parts on hand.

    https://www.rifleman.org.uk/PH_Service_sights.html#5A
    Thank you for the explanation and the link.

  9. #15

  10. #16
    Legacy Member Didier's Avatar
    Join Date
    Jun 2018
    Last On
    01-02-2024 @ 09:16 AM
    Location
    France
    Age
    58
    Posts
    26
    Local Date
    04-23-2024
    Local Time
    08:14 PM
    Thread Starter
    Quote Originally Posted by tr63 View Post
    Yes your No8 is set up to have you to screw a PH5D sight to the left side of the receiver .
    Now finding one and being able to afford it is another matter altogether !
    Were these PH sights rather the exception or the rule at the time when No. 8 trainers were in service? They must have added considerably to the cost of the rifle, so I suppose they must have been used for small-bore competition rather than the basic training of cadets. As regards small-bore competition, I would be interested to know which of these sights were officially acknowledged for participation.

  11. #17
    FREE MEMBER
    NO Posting or PM's Allowed
    RobD's Avatar
    Join Date
    Jan 2010
    Last On
    12-14-2023 @ 03:21 AM
    Location
    UK / South Africa
    Posts
    942
    Local Date
    04-23-2024
    Local Time
    08:14 PM
    For a selection of sights with prices, see Untitled 1

  12. #18
    Legacy Member Strangely Brown's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 05:45 AM
    Location
    Wiltshire UK
    Age
    72
    Posts
    552
    Real Name
    Mick Kelly
    Local Date
    04-23-2024
    Local Time
    08:14 PM
    Quote Originally Posted by Didier View Post
    Now finding one and being able to afford it is another matter altogether !
    Were these PH sights rather the exception or the rule at the time when No. 8 trainers were in service? They must have added considerably to the cost of the rifle, so I suppose they must have been used for small-bore competition rather than the basic training of cadets. As regards small-bore competition, I would be interested to know which of these sights were officially acknowledged for participation.
    Didier,

    They were purchased privately by the cadet force the No.8's belonged to; my own county cadet force in the 1960's had No.8's but with the plain issued leaf sight that the 8/53 fits onto.
    Many of the public schools cadet forces (CCF) were better funded and had the 8/53; I don't think a distinction was made in competition between the various sights as these were mainly used at 25 metres so not offering a huge advantage.
    Mick

  13. #19
    Advisory Panel Nigel's Avatar
    Join Date
    May 2008
    Last On
    Yesterday @ 08:29 AM
    Location
    United Kingdom
    Posts
    224
    Local Date
    04-23-2024
    Local Time
    02:14 PM

    use of PH 5D sights

    Back in 1981 when, as a cadet, I shot a No.8 in the Country Life competition there were two distinct classes. Class A Cup was for No.8 rifles fitted with Match sights. We used the PH 5D with aperture/globe foresights. 93 units entered this class. Class B Cup was for the as issued rear sights with blade foresights - 60 units entered this class.

  14. Thank You to Nigel For This Useful Post:


  15. #20
    Legacy Member Didier's Avatar
    Join Date
    Jun 2018
    Last On
    01-02-2024 @ 09:16 AM
    Location
    France
    Age
    58
    Posts
    26
    Local Date
    04-23-2024
    Local Time
    08:14 PM
    Thread Starter
    Many thanks to both of you for this first hand information - these are the details that we do not read much about on the Net although they give us a better understanding of how and why these PH and AJP sights were used.

  16. Thank You to Didier For This Useful Post:


+ Reply to Thread
Page 2 of 4 FirstFirst 1 2 3 4 LastLast

Similar Threads

  1. Replies: 9
    Last Post: 08-11-2018, 10:33 AM
  2. SLR -Fitted with double aperture rear sight
    By Flying10uk in forum FNFAL Rifles
    Replies: 11
    Last Post: 05-05-2016, 07:16 PM
  3. NZ No. 2 Patt 14 AJ Parker .22 Trainer
    By Roy in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 7
    Last Post: 10-01-2014, 09:00 PM
  4. Springfield M1903 - previously fitted with a Lyman M48 Receiver sight?
    By Arkaler in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 3
    Last Post: 10-12-2013, 10:43 PM
  5. M 1903 rear sight attachment
    By kanterj in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 2
    Last Post: 06-07-2013, 08:12 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts