+ Reply to Thread
Page 1 of 6 1 2 3 ... LastLast
Results 1 to 10 of 57

Thread: M1 So you have a rebuild ?

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member imntxs554's Avatar
    Join Date
    Jul 2014
    Last On
    Yesterday @ 03:17 PM
    Location
    Texas
    Posts
    1,159
    Local Date
    04-19-2024
    Local Time
    07:44 PM

    M1 So you have a rebuild ?

    Well finally got what i wanted a local seller of an Inland '45 M1icon Carbine. Well i was already told i took a bath. I paid no more than 950 for not just the rifle which shoots Wonderful, but a full ammo box to the top with 30 carbine rounds, 4 very nice USGI mags, Utica Bayonet, ALOT of parts (all marked) i mean i was skeptical at first and thought this would be the case, but i can get my money back, so where do you start to get this almost close to '45 period. After i got kicked in the rear for this Carbine. I think i got a little buyers remorse. I know you meant well and didnt beat around the bush, but i feel like my teeth were kicked in. LoL
    I wish i knew more about photography and angles and where to shoot, i just have this cheap cell phone.

    Frank
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by imntxs554; 10-10-2014 at 02:07 AM.
    Frank

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 08:44 PM
    Location
    Victoria BC
    Posts
    29,908
    Real Name
    Jim
    Local Date
    04-19-2024
    Local Time
    05:44 PM
    Well, maybe you didn't take a bath...exactly...with all that ammo included and a pile of part. You can't believe what just anyone says...I guess these guys will sort us out soon enough. Maybe you can sell some of the spares for a little re-coup? Shoot the p*ss out of the carbine...keep the brass for reloading, or sell it to reloaders.

    How much ammo is there? That would be a couple hundred $ here for that. The bayonet might be another hundred...maybe...
    Regards, Jim

  4. Thank You to browningautorifle For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Legacy Member imarangemaster's Avatar
    Join Date
    Mar 2009
    Last On
    09-19-2023 @ 12:24 AM
    Location
    Northern California
    Posts
    3,308
    Local Date
    04-19-2024
    Local Time
    07:44 PM
    What date is on the barrel and what serial number. The adjustable rear sight and bayonet lug are probably original to weapon if it is a 1945 build...

  7. #4
    Contributing Member imntxs554's Avatar
    Join Date
    Jul 2014
    Last On
    Yesterday @ 03:17 PM
    Location
    Texas
    Posts
    1,159
    Local Date
    04-19-2024
    Local Time
    07:44 PM
    Thread Starter
    Well so far my wife and i Stopped at 300 and thers more, the barrel is dated 45 and the serial number is on one of the pics but its in the 6 mil, range, plus 2 canvas bags 2 stock pouches which are probably repro, plus i never seen an oiler that looks like this, the bottom looks like the lead of a 45 round 2 oilers marked II with a circle. I had to stop for awhile with this and the storage i found a nice Springfield Armory Stock and handguard today
    Frank

  8. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 08:44 PM
    Location
    Victoria BC
    Posts
    29,908
    Real Name
    Jim
    Local Date
    04-19-2024
    Local Time
    05:44 PM
    We'll need some better pics once you get the chance. Then we can have a better idea. I still think that ammo is worth quite a bit. How much is there? You say you stopped counting at 300?
    Regards, Jim

  9. #6
    Legacy Member imarangemaster's Avatar
    Join Date
    Mar 2009
    Last On
    09-19-2023 @ 12:24 AM
    Location
    Northern California
    Posts
    3,308
    Local Date
    04-19-2024
    Local Time
    07:44 PM
    With a 6 million serial number, the barrel (depending on markings) , band, and rear sight probably are original to the weapon. The leather handled bayonet is worth at least $100, too. I think you did well.

  10. Thank You to imarangemaster For This Useful Post:


  11. #7
    Contributing Member imntxs554's Avatar
    Join Date
    Jul 2014
    Last On
    Yesterday @ 03:17 PM
    Location
    Texas
    Posts
    1,159
    Local Date
    04-19-2024
    Local Time
    07:44 PM
    Thread Starter
    I tried to take a picture of the barrel but the flash covers it. I'll take it outside in the daylight to try it, but it says
    INLAND MFG DIV.
    GENERAL MOTORS
    ?-45
    the month if thers one is worn but the 45 is clear
    on the Magazine Catch has HI.... theres so much, but that very sweet Springfield Stock i found in that storage will look very nice
    that Chestnutridge Ridge Supply...(Dark Walnut) Military Stock Stain with a hint of red just came in Today.
    Now i have to find some videos on YouTube to , learn how to apply inside and outside, then it says for best results use boiled
    linseed oilicon, so i hope there is a wood working thread here. Thanks

    Jim, i forgot to tell you there 524 rounds and not including what i have : )

    Frank
    Last edited by imntxs554; 10-10-2014 at 01:29 AM.
    Frank

  12. Thank You to imntxs554 For This Useful Post:


  13. #8
    Legacy Member imarangemaster's Avatar
    Join Date
    Mar 2009
    Last On
    09-19-2023 @ 12:24 AM
    Location
    Northern California
    Posts
    3,308
    Local Date
    04-19-2024
    Local Time
    07:44 PM
    I would say the rear sight and barrel are original for the Inland with that serial number. The barrel band was for a late Quality Hardware, but who knows, might have been shipped to Inland when Quality production stopped. Maybe someone with War Baby can look it up.

  14. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    Mizzouboy's Avatar
    Join Date
    Mar 2009
    Last On
    02-23-2016 @ 12:19 PM
    Location
    Alabama
    Posts
    110
    Local Date
    04-19-2024
    Local Time
    06:44 PM
    Looks like a hand stamped M 1. Common on 6 mil serial #'s.

  15. #10
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 08:44 PM
    Location
    Victoria BC
    Posts
    29,908
    Real Name
    Jim
    Local Date
    04-19-2024
    Local Time
    05:44 PM
    Well, 500 plus rounds ain't cheap. We're slowly working towards the deal being not too bad. Like I say, I thought it was just a carbine and bayonet...try turning the flash off on your camera and use a bit more ambient light...
    Regards, Jim

+ Reply to Thread
Page 1 of 6 1 2 3 ... LastLast

Similar Threads

  1. My AKM rebuild
    By Bill Hollinger in forum Soviet Bloc Rifles
    Replies: 8
    Last Post: 05-31-2013, 08:12 AM
  2. No4 T Rebuild
    By PScott in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 21
    Last Post: 12-04-2012, 05:44 PM
  3. To rebuild or not?
    By tbonesmith in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 06-19-2011, 06:25 AM
  4. No4 Mk1 T Rebuild
    By tbonesmith in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 57
    Last Post: 12-29-2010, 07:40 AM
  5. SVT 40 rebuild
    By sdh1911 in forum Soviet Bloc Rifles
    Replies: 0
    Last Post: 05-25-2010, 08:16 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts