+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: Finally!!!

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member amadeus76's Avatar
    Join Date
    Dec 2016
    Last On
    01-11-2024 @ 06:51 PM
    Location
    Harker Heights, tx
    Posts
    305
    Local Date
    04-19-2024
    Local Time
    10:26 AM

    Finally!!!

    So a couple years ago I bought a beat up 1942 Longbranch Lee Enfield No4. The stock was shrunk and the barrel turned out to be trashed but I got it cheap so no worries there. I decided that since the barrel and stock couldn't be saved I would salvage the reciever and get it turned into a repro sniper. I contacted Brian Dickicon who recommended Bruce Dow for the conversion work. Dow replaces the barrel with a Criterion, mounted the pads (from Fulton in the U.K.), and collminated the bracket (from Roger Payneicon). He also refinished the metal parts before sending it to Brian Dick who did the wood fitting. The end result is nothing short of beautiful!!!

    https://i.imgur.com/BdO1jRm.jpg

    I’m hoping to get out to the range this weekend to break her in and I’m considering getting a repro scope (for now I just have it topped with a K3) but I’m thrilled with how it turned out.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by amadeus76; 12-17-2019 at 07:28 PM.

  2. Thank You to amadeus76 For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 09:55 AM
    Location
    Victoria BC
    Posts
    29,904
    Real Name
    Jim
    Local Date
    04-19-2024
    Local Time
    08:26 AM
    Here's a live link for you guys... Imgur: The magic of the Internet

    Rifle looks great, worth the wait.
    Regards, Jim

  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #3
    Contributing Member 303 Gunner's Avatar
    Join Date
    Dec 2018
    Last On
    04-16-2024 @ 05:49 PM
    Location
    Maine, United States
    Age
    34
    Posts
    181
    Real Name
    Joshua
    Local Date
    04-19-2024
    Local Time
    11:26 AM
    Fantastic looking rifle! Should be lots of fun at the range. You'll have to let us know how she shoots!

  7. #4
    Contributing Member Ovidio's Avatar
    Join Date
    Dec 2016
    Last On
    Today @ 10:33 AM
    Location
    Pordenone, Italy
    Posts
    2,152
    Real Name
    Ovidio Gentiloni
    Local Date
    04-19-2024
    Local Time
    05:26 PM
    The beauty of passionate people helping each other.
    Very nice.
    34a cp., btg. Susa, 3° rgt. Alpini

  8. Thank You to Ovidio For This Useful Post:


  9. #5
    Legacy Member Scout Sniper's Avatar
    Join Date
    Jul 2019
    Last On
    12-11-2023 @ 05:45 PM
    Location
    United Kingdom
    Posts
    232
    Local Date
    04-19-2024
    Local Time
    03:26 PM
    Very nice!

  10. #6
    Advisory Panel
    Roger Payne's Avatar
    Join Date
    Mar 2008
    Last On
    Today @ 05:37 AM
    Location
    Sutton Coldfield, UK.
    Posts
    3,437
    Real Name
    Roger Payne
    Local Date
    04-19-2024
    Local Time
    04:26 PM
    You can be proud of her. I'm sure she'll likely shoot as good as she looks.....

  11. #7
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    04-15-2024 @ 01:08 PM
    Location
    South West Western Australia
    Posts
    7,749
    Real Name
    CINDERS
    Local Date
    04-19-2024
    Local Time
    11:26 PM
    Very nice indeed.

  12. #8
    Contributing Member mrclark303's Avatar
    Join Date
    Jul 2012
    Last On
    Yesterday @ 08:25 PM
    Location
    The wild west of England
    Posts
    3,402
    Real Name
    Mr Clark
    Local Date
    04-19-2024
    Local Time
    04:26 PM
    Superb looking rifle, great job...

  13. #9
    Legacy Member amadeus76's Avatar
    Join Date
    Dec 2016
    Last On
    01-11-2024 @ 06:51 PM
    Location
    Harker Heights, tx
    Posts
    305
    Local Date
    04-19-2024
    Local Time
    10:26 AM
    Thread Starter
    ***Range Update***

    So I got her out to the range today to finish barrel break in and scope dual in. After I had the scope zeroed I shot a few 5 round groups using Hornady Vintage ammo. I’m an average shot, maybe a little better but over 3 groups each starting from a cooled barrel I averaged about 1.75 MOA. The interesting thing was that the first 3 shots of each group were cloverleafed and the last two rounds opened up the groups.

    I’m quite impressed and happy with the rifle and I look forward to seeing what handloads can get me down to.

    Thanks again Brian, you’re a gentleman and an artist!

  14. Thank You to amadeus76 For This Useful Post:


  15. #10
    Contributing Member CINDERS's Avatar
    Join Date
    Nov 2009
    Last On
    04-15-2024 @ 01:08 PM
    Location
    South West Western Australia
    Posts
    7,749
    Real Name
    CINDERS
    Local Date
    04-19-2024
    Local Time
    11:26 PM
    Arma allot of us are shooting 3 shot groups nowdays its as you have seen with a 5 shotter the group opens up besides you use less ammo which is a bonus, but that even so is pretty respectable grouping I gather that was at 100M.
    Its great when you get the right people doing stuff that have the expertise and the passion to build a quality package.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Finally, Finally, Got That Remmie Mosin Nagant
    By gandog56 in forum Soviet Bloc Rifles
    Replies: 5
    Last Post: 04-03-2015, 03:06 PM
  2. I finally got one!
    By mtbikerwvu in forum Pattern 1913/1914 and M1917 Rifles
    Replies: 10
    Last Post: 04-30-2012, 12:18 AM
  3. Finally getting set up for 6.5 Jap
    By Danthe19Delta in forum Ammunition and Reloading for Old Milsurps
    Replies: 1
    Last Post: 07-05-2009, 08:40 PM
  4. Finally !!!
    By targetmaster in forum Krag Rifles
    Replies: 1
    Last Post: 04-06-2009, 02:36 PM
  5. I Finally got one
    By Cecil in forum M1 Garand/M14/M1A Rifles
    Replies: 12
    Last Post: 03-03-2009, 09:38 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts