+ Reply to Thread
Page 1 of 4 1 2 3 ... LastLast
Results 1 to 10 of 38

Thread: "...actively sought out and destroyed..." 'A' Suffix No.4 Rifles

Click here to increase the font size Click here to reduce the font size
  1. #1
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    04-19-2024
    Local Time
    05:39 PM

    'A' Suffix No.4 Rifles (New title)

    This is for all of you who have No.4 rifles of whatever Mk. to record, discuss and display your "non-standard" rifles.

    Just to stir the pudding a bit, I speculate that the title phrase may be a bit inaccurate, except in certain situations. I'm thinking that "actively searched out and 'removed from service'" may be a more accurate statement. (more later)

    Comments, references, and, especially, photos are welcomed! Likely supsects are pre-WWII trials rifles and WWII Fazackerlys, but any No.4 (or No.5) is fine.

    Let's see where this goes.



    ETA: Link below to the instigating thread for this one:

    Help on Serial Number - Military Surplus Collectors Forums

    May post some more links to other older threads if there's interest. -NB:Work in progress- I don't get long breaks!

    Peter Laidlericon's most useful thread on "A" suffix origins:

    Mysteries of the 'A' Suffix - Military Surplus Collectors Forums

    Spinecracker's thread on "what to look for" (haven't reviewed it, yet):

    A suffix on serial number - what parts were typically non-interchangeable? - Military Surplus Collectors Forums

    A late ETA: Adding link to newer thread:

    Odd No4 number?

    In which Peter Laidler adds the possibility that some Fazackerlys may have been suffixed due to non standard rear sight cuts, requiring shims to positively position the sight from side to side.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by jmoore; 02-20-2014 at 02:00 AM. Reason: Friendlier title

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    04-19-2024
    Local Time
    05:39 PM
    Thread Starter
    To start, This is the only rifle of which I have an online image. It's ugly, but originally it was purchased just for the early forestock and "waisted" SM fore sight protector. However, it shoots well, so it may just stay together, mismatched (Savage) bolt and all.



    The butt socket reads(best as I can figure):
    ROF
    12/42
    T29988A

    (Too much Christmas cheer? or was it done during a Junkers 88 raid? or both?)



    Last edited by jmoore; 06-26-2010 at 08:22 AM.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    04-19-2024
    Local Time
    05:39 PM
    Thread Starter
    Example number two:

    Aside from what appears to be a light scrubbing of the woodwork, a crispy fresh Fazackerly. The engraved information is still mostly shiney where the bare steel is exposed.

    Sorry for the bad camera work, this isn't the good one that I get to borrow sometimes.





    Oh, this one has a dated forestock, as mentioned in another thread.
    Last edited by jmoore; 06-26-2010 at 08:08 AM.

  6. #4
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    04-19-2024
    Local Time
    05:39 PM
    Thread Starter
    And for the last of my photo'd Fazackerys today, a painted and import marked Fazackerly that seems to have all the "right" parts, and a dated forestock as well.



    Note the small importer's mark at the very bottom of the butt socket- unfortunately, they aren't usually this discrete.



    Interesting that the striker and striker retaining screw were not painted- not the usual Bubba job, and the paint is pretty darn tough, don't know exactly what to think of it.
    Last edited by jmoore; 06-26-2010 at 08:19 AM.

  7. #5
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 09:55 AM
    Location
    Victoria BC
    Posts
    29,904
    Real Name
    Jim
    Local Date
    04-19-2024
    Local Time
    02:39 PM
    I wonder if the weld on the first one's charger bridge was a field repair? I sure like the front sight base, you don't see them much...

  8. #6
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    04-19-2024
    Local Time
    05:39 PM
    Thread Starter
    Quote Originally Posted by browningautorifleicon View Post
    I wonder if the weld on the first one's charger bridge was a field repair? I sure like the front sight base, you don't see them much...
    If you look carefully, they all were welded, apparently from the factory, so I'm guesing that the top one just never had the weld "prettied up". The 6/43 is a little nicer, and the 10/43 only shows as a heat affected zone (localized hardening) in the finish.

    The sight protector's quite nifty, but is likely a completely random installation at some point well past the rifle's mfg. date.

  9. #7
    Deceased January 15th, 2016 Beerhunter's Avatar
    Join Date
    Dec 2007
    Last On
    01-02-2016 @ 04:03 PM
    Location
    Hampshire, England
    Posts
    1,181
    Local Date
    04-19-2024
    Local Time
    09:39 PM
    Quote Originally Posted by jmoore View Post
    Just to stir the pudding a bit, I speculate that the title phrase may be a bit inaccurate, except in certain situations. I'm thinking that "actively searched out and 'removed from service'" may be a more accurate statement. (more later)
    I have to say that I am coming around to your view. As I said on other threads I was quoting someone else. Judging by the numbers that appear to have turned up in the US an even more accurate phrase might be: "actively sought out and sold to Sam Cummins/exported to the US"."
    Last edited by Beerhunter; 06-26-2010 at 01:58 PM.

  10. #8
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    04-19-2024
    Local Time
    05:39 PM
    Thread Starter
    Quote Originally Posted by Beerhunter View Post
    I have to say that I am coming around to your view. As I said on other trheads I was quoting someone else. Judging by the numbers that appear to have turned up in the US an even more accurate phrase might be: "actively sought out and sold to Sam Cummins/exported to the US"."
    Beat me to the punchline, you did! I reckon they were turned into cash or favors across the globe.

    However, Trials Rifles may have been largely destroyed ---except for the No.4 Mk.I(T)s--- When was the last time anyone saw one of those in original --or even early WWII configuration, VERY few, methinks, are floating about. (Yah, there's some...)

    Trials rifle pics are, as always, welcome!

    (Like this, but "modded" so that the "A" is a Suffix, not the Prefix-or both suffix AND prefix-that would be Most Special...)



    BTW for you MKLicon referencing types (a GOOD idea), see the faint "1" just crowding the front of the last "3"? Didn't know it would show that well, and this is an old pic

    Link to The MKLicon file and another of it's date close-up.:

    1933 No.4 Mk1(T) Sniper - Military Surplus Collectors Forums

    http://photos.imageevent.com/badgerd...20_Medium_.JPG

    (I'm distracting myself from the intent of this thread, but I hope you enjoy!)
    Last edited by jmoore; 10-02-2010 at 07:50 AM. Reason: Making my mess worse! Can't help it, it's fun..., restored photo

  11. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    bradtx's Avatar
    Join Date
    Jan 2009
    Last On
    11-29-2010 @ 08:01 AM
    Location
    Pearland, TX
    Posts
    302
    Local Date
    04-19-2024
    Local Time
    03:39 PM
    jmoore, A thread who's time is probably long past due, I hope it becomes popular because it seems there's quite a disparity of opinion regarding the Fazakerley A suffix rifles. Time to get factual.

    Two things I've read about the A suffix's original intent are a) It's a mark to alert the repair workshop of a rifle being nonstandard in some way and b) a rifle with the A suffix is to be destroyed saving only the reusable, interchangeable pieces. While the two are intertwined I think item a is closer to the intent than item b. Opinions?

    Frankly I was surprised by the posters that stated that their experiance had included many WWII manufactured non A suffixed Fazakerleys. My experiance has been quite the opposite with all Fazakerleys I've owned and seen in person having the A suffix. The only non A suffixed WWII production Fazakerley rifles I've seen are a couple of '41 or '42 examples that IIRC were the same as the approved pattern. More non A suffix'd pics would be good.

    The question becomes "Why so many A suffix'd Fazakerley rifles?" Perhaps we can shed the blind monks examining an elephant scenario and arrive at some conclusion.

    Best of luck to us,
    Brad
    Last edited by bradtx; 06-27-2010 at 09:53 AM.

  12. #10
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    04-19-2024
    Local Time
    05:39 PM
    Thread Starter
    Quote Originally Posted by bradtx View Post
    Two things I've read about the A suffix's original intent are a) It's a mark to alert the repair workshop of a rifle being nonstandard in some way and b) a rifle with the A suffix is to be destroyed saving only the reusable, interchangeable pieces. While the two are intertwined I think item a is closer to the intent than item b. Opinions?

    The only non A suffixed WWII production Fazakerley rifles I've seen are a couple of '41 or '42 examples that IIRC were the same as the approved pattern. More non A suffix'd pics would be good.
    I think your item "A" makes sense, mostly due to the fact that I don't think it would be economically or manpower prudent to inspect each rifle AS EACH IS BEING TORN DOWN in hopes of catching whatever non-interchangeable components exist in order to prevent getting them mixed in w/ other standard parts, thus making rebuilds ever so much more difficult. Teardowns get much slower, require a higher skill level, and require more personnel. Also, "odd" parts now HAVE to be tied to a particular weapon. There's enough dramas working "tired" weapons already.

    Easier just to pull 'em and worry about 'em later.

    I won't mind non-suffixed WWII Fazackerly entries! However, I think they'll really be much more likely to be FTR'd. Let's find out.


    "A" suffixed No.4 rifles of other manufacturers are also welcome here. Probably scarce?


    Come on, gang! Photos 'til we choke!
    Last edited by jmoore; 06-27-2010 at 10:25 AM.

+ Reply to Thread
Page 1 of 4 1 2 3 ... LastLast

Similar Threads

  1. "He told me he had six of the 30-40 army craig rifles."
    By John Beard in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 3
    Last Post: 09-21-2009, 12:53 PM
  2. Hollywood "Hero" rifles
    By Bob Womack in forum M1 Garand/M14/M1A Rifles
    Replies: 12
    Last Post: 04-10-2009, 07:56 PM
  3. Which Enfield Maker Stamped their Rifles "AE"
    By skirsons in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 8
    Last Post: 08-21-2007, 05:54 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts