+ Reply to Thread
Results 1 to 3 of 3

Thread: Trap Door rifle question

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member Doco overboard's Avatar
    Join Date
    Jun 2015
    Last On
    Yesterday @ 04:48 PM
    Location
    Delmarva Peninsula
    Posts
    452
    Real Name
    Brian Stiles
    Local Date
    03-28-2024
    Local Time
    06:20 AM

    Trap Door rifle question

    I have a 45/70 rifle that I'm looking at. When I open the breech and its in the vertical position, I can feel the firing pin protrusion at the face of the breech block. When I push up on it, the pin is easily moved flush but falls right down due to gravity.
    My question is, does the pin return to flush as the door is closed on the head of a cartridge or is there a broken spring in there that keeps the pin in the clear until the rifle is fired?
    Right now its floating and makes me think something stupid could happen due to the weight of the door.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel Dick Hosmer's Avatar
    Join Date
    Mar 2009
    Last On
    02-07-2024 @ 03:34 AM
    Location
    Northern California
    Posts
    103
    Real Name
    Dick Hosmer
    Local Date
    03-28-2024
    Local Time
    03:20 AM
    All of the .58 and .50 versions, as well as the early Model 1873s had a firing pin spring to keep the pin withdrawn until struck by the hammer, fearing that accidental discharge might occur with a spirited closure of the breech. However, the springs were prone to rusting and breakage, occasionally jamming the pin in a protruding position. The springs were abandoned circa 1876 and the form of the pin changed to eliminate the sharp corner (required for the spring but also an obvious point of stress cracking). The combination of rust and broken parts had doomed what SEEMED like a good idea. Those first changes did not completely solve the rust issue, however - which was finally addressed by making the firing pin from "aluminum bronze" (which could not rust to the block) in 1888. For today's shooters, as long as the pin moves freely, there should be no problem. The aluminum bronze pin first appeared as a component of the abortive "Positive Cam" experiment. The latch modification was not adopted, but the new pin was. The PC rifles, just 100 made in the 415000 range, and actually marked "US/Model/1888" on the block, are covered in my new book.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Contributing Member Doco overboard's Avatar
    Join Date
    Jun 2015
    Last On
    Yesterday @ 04:48 PM
    Location
    Delmarva Peninsula
    Posts
    452
    Real Name
    Brian Stiles
    Local Date
    03-28-2024
    Local Time
    06:20 AM
    Thread Starter
    Thank you for the information, I picked up the rifle recently at an auction for the starting bid and have just begun to familiarize myself with the type.
    Has your book made its way to the publisher yet? I'm sure it's filled with a substantial amount of authoritive information that I can use.
    Thanks again, Brian

+ Reply to Thread

Similar Threads

  1. Springfield 1873 Trap-Door Rifle - Information?
    By S&WOwner in forum Other U.S. Service Rifles
    Replies: 9
    Last Post: 05-13-2015, 11:20 AM
  2. Working the 1873 Springfield Trap-Door Single-Shot Rifle
    By Newsfeed Hound in forum The Watering Hole OT (Off Topic) Forum
    Replies: 0
    Last Post: 09-23-2010, 01:00 AM
  3. 1866 trap door
    By crane op in forum Other U.S. Service Rifles
    Replies: 3
    Last Post: 07-12-2010, 05:27 PM
  4. 1873 Trap door.
    By A. F Medic in forum Other U.S. Service Rifles
    Replies: 9
    Last Post: 06-23-2009, 03:57 PM
  5. trap door value
    By wellcraft in forum Other U.S. Service Rifles
    Replies: 6
    Last Post: 03-18-2009, 12:22 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks