+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 17

Thread: Danish Krag

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    avlane's Avatar
    Join Date
    Mar 2009
    Last On
    06-25-2011 @ 02:38 PM
    Posts
    10
    Local Date
    03-19-2024
    Local Time
    03:13 AM

    Danish Krag

    Not a US Kragicon, but recently acquired a nice Danishicon krag rifle, 8x58R. I have dies and a few cases with more coming. There is little load data available, and some is deemed by various sources to be unsafe. So far, I'm relying on 30-40 data. I've test fired a few loads with a moderate charge of IMR 4350 and 150 grain soft points (.323) and it seems to work. Anyone want to volunteer their load experience with this? I'll use at my own risk, of course.

    Also, any info about importation of these would be appreciated. This one has no import stamp. Supposedly, the Germans took about 60,000 of these when they disarmed the Danish army. Those in the US may have come after war from captured Germanicon stocks. Interesting rifle, with its side opening gate and barrell sleeve. Still like my US Krags, though!
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member andiarisaka's Avatar
    Join Date
    Dec 2008
    Last On
    02-22-2024 @ 04:00 PM
    Location
    Upper Appalachia aka SE Ohio
    Posts
    343
    Local Date
    03-19-2024
    Local Time
    02:13 AM
    There are 13 loads available at http://ammoguide.com. There is also much discussion at 8X58R Danish M89 Ammo Question - Gunboard's Forums. Some of loads on ammoguide seem warm for such an old rifle, but one fellow is shooting them in rolling block made in 1895, I think he's still alive. The ammoguide membership is low cost, well worth the money to me. Starting loads for the 8x57 at Hodgdon give the pressure and these loads would produce slightly less pressure in the higher capacity 8x58 case, good point to work up from. Sadly no 4350 loads with the 150gr bullet. Cartridge Loads - Hodgdon Reloading Data Center - data.hodgdon.com
    Last edited by andiarisaka; 05-26-2009 at 07:07 AM. Reason: Added info

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    avlane's Avatar
    Join Date
    Mar 2009
    Last On
    06-25-2011 @ 02:38 PM
    Posts
    10
    Local Date
    03-19-2024
    Local Time
    03:13 AM
    Thread Starter

    Danish Krag

    Thanks for the leads!

  6. #4
    Legacy Member Coastie's Avatar
    Join Date
    Mar 2009
    Last On
    07-09-2020 @ 09:17 PM
    Posts
    16
    Local Date
    03-19-2024
    Local Time
    02:13 AM
    Good luck with ammo.
    Some decades ago I had found a couple of Danishicon Krags and searched for ammo. A source in Maine sent a box.
    At the range recoil was great, bolt was hard to close. My "buddy" was encouraging me to shoot more.
    When the primer popped out of the third round, I QUIT!
    Formed from .45 basic, the rims were not properly sized or not cut at all.
    Still got the Danes, can't afford the ammo.
    Tell me more of your efforts, I may try again.
    Thanks, Paul
    Houston, Texas

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Jim K's Avatar
    Join Date
    Mar 2009
    Last On
    12-01-2009 @ 03:41 PM
    Posts
    505
    Local Date
    03-19-2024
    Local Time
    03:13 AM
    Unlike the US Kragicon, the Danishicon (and Norwegianicon) Krags have both lugs bearing, so they are a dual lug rifle (just not symetrical like the Mauser), and quite strong. You can go to a low-end 8mm Mauser load if you can find good cases.

    Jim

  8. #6
    Legacy Member jon_norstog's Avatar
    Join Date
    Mar 2009
    Last On
    11-01-2021 @ 12:41 AM
    Location
    Portland, Oregon
    Age
    78
    Posts
    582
    Local Date
    03-19-2024
    Local Time
    12:13 AM
    AV,

    I thought about a Danishicon, was looking for one that had been butchered already, for elk hunting. The ballistics of the 8x58r are a little stronger than 8x57. Not bad!

    More I think about it, I think a Norwegianicon is the way to go. Like the Danish it locks on the lug and the rib, and was made well into the 20th century with modern metallurgy.

    They were mostly 6.5x55, but can feed any of the x57 rounds. A 7x57 for cross-canyon shots at mule deer, an 8x57 for elk and moose in timber. All you need is a pre-butchered rifle or an action, and a good gunsmith.

    Actually, a Danish action might make up a pretty good 45-70. Or maybe a .33 Winchester. Load it up and let it bark.

    jn

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    Jim K's Avatar
    Join Date
    Mar 2009
    Last On
    12-01-2009 @ 03:41 PM
    Posts
    505
    Local Date
    03-19-2024
    Local Time
    03:13 AM
    The factory ballistics of the 8x58R make it a bit hotter than the 8x57JS, but in deference to the fact that it is an older rifle, I usually recommend the low end of 8x57 loads, which are still hotter than .30-40.

    Jim

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    avlane's Avatar
    Join Date
    Mar 2009
    Last On
    06-25-2011 @ 02:38 PM
    Posts
    10
    Local Date
    03-19-2024
    Local Time
    03:13 AM
    Thread Starter

    Danish Krag

    my cases came in from Buffalo Arms. I have 25 loaded for Saturday. Hornady 150 SP's with moderate IMR 4350 load. This one may not have barked for a long time. We'll see how she does.

  11. #9
    Legacy Member jon_norstog's Avatar
    Join Date
    Mar 2009
    Last On
    11-01-2021 @ 12:41 AM
    Location
    Portland, Oregon
    Age
    78
    Posts
    582
    Local Date
    03-19-2024
    Local Time
    12:13 AM
    Hey, let us know!

    Thanks,

    jn

  12. #10
    FREE MEMBER
    NO Posting or PM's Allowed
    avlane's Avatar
    Join Date
    Mar 2009
    Last On
    06-25-2011 @ 02:38 PM
    Posts
    10
    Local Date
    03-19-2024
    Local Time
    03:13 AM
    Thread Starter

    The Dane shoots!

    Took my 25 rounds and test fired the Dane Saturday at my club's 100 yard range. Lowest setting on the ladder sight prints 15" high at 100.

    My loads were 48 grains of IMR 4350 and 50 grains of the same with a Hornady .323 150 grain soft point. I mention the load for info only with the ususal caveats: safe in my rifle, maybe not yours, use at your own risk, etc. Recoil was mild. No visible pressure signs, cases appeared very clean after firing.

    I fired four 5 shot groups, two of each load. Three of the groups measured around three inches. The last group I fired with 48 grains measured 1.1 inches. A fluke? Don't have any idea. But I would say this old Dane has a lot of life left.

    I'll load 25 more with 48 grains and fire them at my club's 200 (meter) range. I'll shoot this one at the club's military rifle match if I can solve the sighting issue. I was able to adjust windage on the front sight using an adjuster made for 1911 Swissicon type rifles. The dove tail is too wide to allow substitution of the readily available higher Mauser front sights. I'll see where it prints at 200 and go from there. Suggestions on a front sight substitute are welcome.

    On the load, I suspect that IMR 4831 may also work in this long barrelled Danishicon. But that will be for later. Enough discussion for now. The term "Danish" produces a Pavolovian hunger response that will bust my diet.

    I'll post pics of this rifle if I can figure out how to do it.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Tell Me about my New Krag...
    By dpatten in forum Krag Rifles
    Replies: 6
    Last Post: 09-22-2009, 11:34 PM
  2. Danish '06 in Worcester, Mass.
    By Griff Murphey in forum M1 Garand/M14/M1A Rifles
    Replies: 3
    Last Post: 05-25-2009, 07:55 PM
  3. "New" Danish Breda
    By ltcboy in forum M1 Garand/M14/M1A Rifles
    Replies: 4
    Last Post: 03-09-2009, 11:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks