+ Reply to Thread
Results 1 to 3 of 3

Thread: Mauser 96 original wood finish

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member daveboy's Avatar
    Join Date
    May 2009
    Last On
    03-07-2024 @ 08:21 PM
    Location
    Alabama
    Posts
    208
    Real Name
    david
    Local Date
    03-28-2024
    Local Time
    07:04 AM

    Mauser 96 original wood finish

    I have a 96 Mauser with very good metal finish, serial numbers on all parts match. The wood, while in great shape, has had a glossy polyurethane applied. I would like to return the wood to its original finish. Was the factory finish linseed oilicon? Any stain applied?

    Are these rifles commonly found in condition as good as this one? Also, what exactly does the stockdisc tell me? I know that the upper portion states that the bore is 6.5 mm, but what other information does it provide?

    Thanks for any help.

    daveboy







    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    01:04 PM

    An acceptable finish for a Carl Gustaf

    The Mauser 96, a.k.a. Swedishicon Mauser or Carl Gustaf is often found in good condition, but the wood work on yours is exceptionally good. In fact it is too good to be true, and has been refinished (see below).

    The scuff marks around the muzzle and foresight indicate that the rifle was not a cabinet showpiece but a rifle that had real use. This conclusion is supported by the stock disk, which indicates bore size as 6.50 mm and bore condition as 2, i.e. rust detected in the corners between lands and grooves, maybe spots in the grooves. Don't panic - the Swedes were notoriously picky about barrel condition, so the barrel probably needs nothing more dramatic than a solid afternoon's work with bronze brush, bore cleaning paste, and a fistful of patches.

    The third section, with "Torped Overslag 0 Str" refers to the correction in "Streck" - an old Swedish angular measure that corresponds to about 10 cm at 100 meters. This correction was necessary when the "Torped" i.e. spitzer-type bullet was introduced, to replace the original round-nose type that was so popular for service rifles in the 1890s. No value is indicated, as by 1915 the standard was to attach a correction table to the right side of the butt, upside down, so that the shooter could read it by simply rotating the rifle without getting out of position. This table is missing, showing that the woodwork was stripped and refurbished, presumably by whoever applied the polyurethane (YUK!).

    Before doing anything about appearance - see how it shoots! Expect a 3" group or better at 100 yards with good ammo. Get some rounds from an experienced Carl Gustaf shooter. Better still - let him try it out!

    Disassemble the rifle, but FIRST note the position of the triggerguard screws, for later reassembly! Strip off the polyurethane with the kind of paint stripper that looks like a jelly and can be removed with spirit. This leaves a smooth surface and does not raise the grain or soften any stamped ID marks. Wash off the stripper with real turpentine and you will have a surface that only requires application of boiled linseed oilicon and some elbow grease to come up with a good finish. You do NOT need to use any kind of sandpaper or wire wool on that surface. And no stain either.

    Finally, the action marking: HK was Helge Gustav Ludivig Kolthoff, Inspector/acceptance officer at Carl Gustafs Stads Gevaärsfaktori from April 1, 1912 to Feb. 28, 1923, which ties up with the date on the rifle.

    The one thing that bothers me is the serial number. By 1915 the serial numbers were in the rough range 330,000 - 370,000. A number 866 would be from 1898, and therefore requires some explanation. However, I am not going to speculate but leave that to someone who knows more than I do.

    Finsally, if you are still reading this with interest, you need "The Swedish Mauser Rifles" ISBN 1-882391-26-8 by Kehaya and Poyer, and "Crown Jewels" ISBN 0-88935-283-6 by Dana Jones, from which the above information was derived.

    Patrick

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member daveboy's Avatar
    Join Date
    May 2009
    Last On
    03-07-2024 @ 08:21 PM
    Location
    Alabama
    Posts
    208
    Real Name
    david
    Local Date
    03-28-2024
    Local Time
    07:04 AM
    Thread Starter
    Thanks for the info. You are correct about the serial number. All parts except the receiver have the last 3 digits of the SN which is 866. The photo that shows the SN on the receiver has the first three digits blanked out (not comfortable posting my weapon's full serial numbers onto the internet).

    daveboy

+ Reply to Thread

Similar Threads

  1. new stock finish
    By hpcomp in forum M1 Garand/M14/M1A Rifles
    Replies: 20
    Last Post: 05-14-2009, 11:48 PM
  2. Original Pre WWII 1911A1 Blue Finish
    By dbarn in forum 1911/1911A1 Service Pistol
    Replies: 4
    Last Post: 04-08-2009, 08:50 AM
  3. No.5Mk1 finish
    By Howard in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 3
    Last Post: 02-05-2009, 08:44 AM
  4. Finnish finish
    By Pete04 in forum Gunsmithing for Old Milsurps
    Replies: 16
    Last Post: 08-14-2007, 08:25 PM
  5. Lee Enfield No4 Mk 1/2 (F) full original wood (Valley Guns)
    By Badger in forum Commercial Auction and Sale "Gossip"
    Replies: 2
    Last Post: 06-25-2007, 01:32 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks