+ Reply to Thread
Results 1 to 3 of 3

Thread: Glock pistols and lead bullets

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Sid's Avatar
    Join Date
    Mar 2009
    Last On
    11-26-2009 @ 11:59 AM
    Location
    Havertown, Pa.
    Posts
    51
    Local Date
    04-19-2024
    Local Time
    12:10 AM

    Glock pistols and lead bullets

    Today I was in a gun shop checking out a Glock 17. The owner of the shop is a Glock armorer and is well respected locally. I asked about the prohibition against using lead bullets in a Glock and he said this was nonsense. He told me that he has shot tens of thousands of handloads with lead bullets through his Glocks and never had any problems. A couple of his employees were there and said they had the same experience. I inquired about barrel leading and he said this was also not a problem. He said you just had to clean the barrel as you would any other pistol and no special procedures were involved. I shoot bowling pins and my club only allows use of lead bullets, no FMJ's. That is the reason for my hesitation before buying one. I would appreciate reader's comments.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    Major Tom's Avatar
    Join Date
    Mar 2009
    Last On
    02-05-2023 @ 04:35 AM
    Posts
    65
    Local Date
    04-18-2024
    Local Time
    11:10 PM
    I have had no problems shooting lead bullets. If I think there might be a trace of lead fouling in the bore, I just use JB bore paste on an old bore brush to clean it up.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    limazulu's Avatar
    Join Date
    Mar 2009
    Last On
    08-31-2011 @ 09:27 PM
    Posts
    114
    Local Date
    04-19-2024
    Local Time
    01:10 AM
    The type of rifling in a Glock barrel causes increased leading and that can cause increased pressure which, in a barrel that doesn't fully support the case can increase the risk of a rupture. Glock doesn't recommend shooting lead bullets or reloads unless you get an after market barrel. If you know the problem you can probably deal with it by cleaning frequently. Or you can get a different barrel.

+ Reply to Thread

Similar Threads

  1. Any Glock Shooters?
    By Stevo in forum The Watering Hole OT (Off Topic) Forum
    Replies: 16
    Last Post: 05-03-2010, 12:26 AM
  2. Loading lead bullets in 30 Carbine
    By Irish Jack in forum M1/M2 Carbine
    Replies: 15
    Last Post: 04-06-2009, 04:14 PM
  3. Reloads and Glock pistols
    By Sid in forum Ammunition and Reloading for Old Milsurps
    Replies: 4
    Last Post: 03-25-2009, 10:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts