+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 20

Thread: No.1 MkV vertical stringing

Click here to increase the font size Click here to reduce the font size
  1. #1
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-28-2024
    Local Time
    05:41 AM

    No.1 MkV vertical stringing

    Finished running all the engine parts in my area AGAIN, so time for another question:
    My No,1 MkV strings shots up and down in a very pronounced way, with the low velocity rounds shooting high and high velocity rounds low. IIRC a 200fps variation resulted in about a 12 inch change, way more than would be useful for long range compensation of trajectories.
    Bedding and stocking up seem OK (I'm really more familiar w/ tweaking No. 4's than SMLE's) and the rifle is gripped on the fore stock while shooting from the bench rather than using sandbags. No other MkV's with which to compare it so just wondering what's up. Isolated quirk or some oddity w/ this variant?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Legacy Member Alan de Enfield's Avatar
    Join Date
    Nov 2007
    Last On
    Yesterday @ 12:49 PM
    Location
    Y Felinheli, Gogledd Cymru
    Posts
    2,526
    Real Name
    Alan De Enfield
    Local Date
    03-28-2024
    Local Time
    09:41 AM
    Quote Originally Posted by jmoore View Post
    Finished running all the engine parts in my area AGAIN, so time for another question:
    My No,1 MkV strings shots up and down in a very pronounced way, with the low velocity rounds shooting high and high velocity rounds low. IIRC a 200fps variation resulted in about a 12 inch change, way more than would be useful for long range compensation of trajectories.
    Bedding and stocking up seem OK (I'm really more familiar w/ tweaking No. 4's than SMLE's) and the rifle is gripped on the fore stock while shooting from the bench rather than using sandbags. No other MkV's with which to compare it so just wondering what's up. Isolated quirk or some oddity w/ this variant?
    The following is a list of faults which would tend to give inaccurate
    shooting. These points should be checked before attempting to Zero


    1. Badly fttting Stock Fore-end,
    2. Loose Butt.
    3. Loose Screws. (Particularly front trigger guard screw)
    4. Loose or damaged Blade Foresight
    5. Loose Block Band Foresight.
    6. Badly fitting Bolt. It should bear evenly with Bolt closed and no 'slop'
    7. Condition Of Barrel for wear, bends, bulges or cordwear.
    8. Loose Backsight.
    9. Trigger to Sear to Bolt interfaces

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Contributing Member
    bigduke6's Avatar
    Join Date
    Jul 2008
    Last On
    03-25-2024 @ 09:09 PM
    Location
    North West England,UK
    Posts
    3,279
    Local Date
    03-28-2024
    Local Time
    09:41 AM
    jmoore,

    Am on a quest for info regarding No1 MkV as i am restoring a sported No1 Mk V, would suggest contact Peter Laidlericon, or the boys at EFD, if the fore end is similar to SMLE would say it could be, fore end stud and spring, nose cap interference with barrel, check inner barrel band, only other thing you say the rifle is gripped at the forestock is this by hand or benchrest?

  6. #4
    Legacy Member Bindi2's Avatar
    Join Date
    May 2008
    Last On
    Today @ 12:41 AM
    Location
    Western Australia
    Posts
    1,446
    Local Date
    03-28-2024
    Local Time
    05:41 PM
    The 200fps variation is most if not all your problem with the vertical stringing.

  7. #5
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-28-2024
    Local Time
    11:41 AM
    The FIRST thing you need to identify with a 'stringing' problem is whether the string is high or low or straddling the point of aim. If it's high, then without doubt it's the front trigger guard screw. I say that a bit glibly because it's not a hard and fast rule!. If it's straddling the POA, then it's the ammo. Once again, I say this carefully...., same as above. But if it's below the POA then it's the fit of the fore-end because as it's whipping it does something magic to the tail end of the bullet and distorts its true flight path. I think the magic thing it does it just tip it or something like that. Ballistics wasn't my thing but the harmonics/vibration was the bit I took a bit of interest in. I'm reading this from Shrivenham notes I made ages ago. BUT, the above, below or straddling the POA is very relevant.

    We used SLR's with various problems set into them for this, such as very elongated handguard screw hole, loose gas blocks and I think, stripped threaded foresights.

    It was always much more apparent on old No4's though............

    That's a bit of food for thought JMoore. Interesting querie, let us know your findings

  8. #6
    Banned Alfred's Avatar
    Join Date
    Oct 2008
    Last On
    10-29-2009 @ 09:18 PM
    Posts
    309
    Local Date
    03-28-2024
    Local Time
    05:41 AM
    Quote Originally Posted by Peter Laidlericon View Post
    We used SLR's with various problems set into them for this, such as very elongated handguard screw hole, loose gas blocks and I think, stripped threaded foresights.
    Interesting method.
    On re reading Hatcher's Notebook I found that he'd also used this sort of method for training machinegunners. He'd introduce a bent part or out of headspace barrel to induce jams and other problems so the trainees would have to use their heads to get the gun back in action quickly.

  9. #7
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-28-2024
    Local Time
    11:41 AM
    Enfield Purists, please do not read this.

    JMoore, remove the fore-end stud and spring, make sure the barrel is not binding in the hole at the front of the nosecap, and try again. I only got sense out of mine when I did that AND removed the nosecap and handguard. Looks horrible, but groups better. I know I must be missing some important fact, but I just don't have the time to work it out.

    In other words, strip everything off until you have a free-floating barrel, try it out, and then put the bits back one by one, noting what effect they have.

    Patrick

  10. Thank You to Patrick Chadwick For This Useful Post:


  11. #8
    Legacy Member Bindi2's Avatar
    Join Date
    May 2008
    Last On
    Today @ 12:41 AM
    Location
    Western Australia
    Posts
    1,446
    Local Date
    03-28-2024
    Local Time
    05:41 PM
    jmore get some ammo that has the same velocity or is very close first. As a reloader i know that the different combinations possible will and do have huge effects on groups. Projectile weight the same as well. When the ammo is right then get into the other suggestions.

  12. #9
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-28-2024
    Local Time
    05:41 AM
    Thread Starter
    Sorry I wasn't clear as to the ammo situation. I was combining several tests all at once during one range session. Most of the velocity variances were due to using five different types of 174gr ammo. But even within those types a 25fps change showed up on the 100 yard target.
    Primary test was to see what ammo the rifle liked best. Secondary considerations included checking the regulation of the rear sight and function. Chronographing the loads was just a happy accident as there usually isn't time to fiddle w/ it. (AFK for a couple of hours here toget some WORK done -happy, happy whilst it lasts!)

    Alan, regarding your points:
    1. Fore end Seems OK, nothing obviously warped or loose including the draws.
    2. Butt tight!
    3. Screws tight!
    4. Front sight tight and edges square.
    5. Front sight block altogether snuggly w/ barrel.
    6. Faces of locking surfaces bear evenly.
    7. Pretty dang nice bore (I've a Hawkeye borescope 'cuz I'm too curious for my own good!).
    8. Its not as good as a No.4 but nothing that would account for Very repeatable results.
    9. Hmmmm, can't rule it out, but nothing noticably different from the usual SMLE.

    Mr. Duke, my bench shooting technique could be described as firing from a luxury foxhole. That is, lean forward, pull rifle hard to shoulder, rest offhand on sandbags whilst firmly gripping forestock,and brace torso against "wall", all whilst seated (unless I'm at Ft. Benning). With an accurate iron sighted rifle its no drama to shoot 1 1/2 MOA, unless I really screw up. Sub-MOA shooting needs a bit more elaborate set-up.

    Bindi, I've run the same multi-ammo/velocity tests on many other .303's without this extreme result! Hence the headscratching.

    Mr. Laidlericon, the loads producing the "bog standard" 2440fps velocity shot very low. To zero required setting the rear to the 500yd setting IIRC. Lowest velocity rounds shot just a tad low. Stupid thing is, rounds that recorded the same velocity would be about touching on target!

    Mr. Chadwick, when I take back to the range I'll give your suggestions a whirl. The inner barrel band placement seems futher rearward than a MkIII and definitely more than earlier Mk's so Harmonics came to mind early on!

    Thanks all! The mystery shall remain unresolved a bit longer, I guess. Sorry for the huge post...

  13. #10
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-28-2024
    Local Time
    05:41 AM
    Thread Starter
    Concerning shooting 1 to 1 1/2 MOA, thats w/ rifles known to shoot 1/2 MOA or better from a "machine" rest. That is I add about 1 MOA inaccuracy to whatwver rifle I'm shooting from my "luxury foxhole".

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. I found the problem with the stringing shots!!
    By Jim Tarleton in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 23
    Last Post: 04-06-2009, 06:48 AM
  2. Solution to Shots Stringing at 45 Degrees
    By Jim Tarleton in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 21
    Last Post: 03-24-2009, 08:54 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks