+ Reply to Thread
Results 1 to 8 of 8

Thread: 1922 M2 encounter

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Kirk's Avatar
    Join Date
    Mar 2009
    Last On
    05-19-2012 @ 03:18 PM
    Location
    Tennessee
    Posts
    550
    Local Date
    04-25-2024
    Local Time
    06:46 AM

    1922 M2 encounter

    I was offered an 1922 M2 Wednesday, s/n 3XX. It is parked but the bolt was left bright & the firing pin & shroud are blued. The bolt is marked M2 on the top of the root & F on the bottom. The barrel is marked SA 8-32. The stock has been sanded & has no markings visible but is otherwise in VG-Ex shape. It came with two magazines; one has three teeth on each side; I did not see any markings like M2 on it. The second must be an after market; it would not lock into the clip slot & had no teeth. The receiver ring & bridge were d&t. It carries a Lyman 48 long slide with an elevation index of 125.

    It came with a hand written letter from the owner who was described as a descendant of the original owner, A US Army officer. A number of the oficer's military records were included but no record indcated purcahse of the rifle. Incidently, he was promoted to sargent in January 1941; commissioned in 1943 & retired a Captain in the 60s.

    Asking price is $1500 which I tought was a bit steep for an M2 that had been refinished & was d&t. Any thoughts what it may be worth?
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    MK111's Avatar
    Join Date
    Mar 2009
    Last On
    09-02-2015 @ 12:48 AM
    Location
    SW Ohio
    Posts
    98
    Local Date
    04-25-2024
    Local Time
    07:46 AM
    Is the reciever marked M2 or MII? If M2 then it is a orginal. The magazine should be marked M2 on the side. The M2 magazine is slightly longer the the unmarked M1icon magazine. If you do buy it make sure it will feed properly but I don't see how it would as the M2 mag is about 1/8" longer. The second magazine is it about 1/4" longer or about the same length? Orginal mags are about 150.00 when you can find them.
    1500.00 is about the going price for these guns nowdays.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    Kirk's Avatar
    Join Date
    Mar 2009
    Last On
    05-19-2012 @ 03:18 PM
    Location
    Tennessee
    Posts
    550
    Local Date
    04-25-2024
    Local Time
    06:46 AM
    Thread Starter
    The receiver is marked Cal .22 M2. I looked at both mags & did not notice (but may have missed the M2 on the GI mag. That mag protruded about 1/8" below the trigger guard; it was easy to grab the teeth. The other mag was the size; is unmarked; has a removable base; lacks the thumb tab & will not lock into place.

    So, $1500 with a d&t receiver and a sanded stock is a fair price?

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    Jeff L's Avatar
    Join Date
    Feb 2009
    Last On
    06-22-2014 @ 04:10 PM
    Posts
    208
    Local Date
    04-25-2024
    Local Time
    04:46 AM
    Kirk, you might want to see if you get some input from Herschel, the resident model 1922 expert.

    -Jeff L

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Mike Haas's Avatar
    Join Date
    Mar 2009
    Last On
    04-23-2019 @ 05:54 PM
    Posts
    509
    Local Date
    04-25-2024
    Local Time
    07:46 AM
    Quote Originally Posted by Kirk View Post
    The receiver is marked Cal .22 M2. I looked at both mags & did not notice (but may have missed the M2 on the GI mag. That mag protruded about 1/8" below the trigger guard; it was easy to grab the teeth. The other mag was the size; is unmarked; has a removable base; lacks the thumb tab & will not lock into place.

    So, $1500 with a d&t receiver and a sanded stock is a fair price?
    Kirk - $1200 to $1500 is about average retail; dependant on some info you didn't provide. (Serial # - Stock type, buttplate ete.) Photos would help.
    See the attached thread.

    Which of the Springfield 1922s is the best? - Military Surplus Collectors Forums

    Springfield M1922 - Looking for info - Military Surplus Collectors Forums


  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    Kirk's Avatar
    Join Date
    Mar 2009
    Last On
    05-19-2012 @ 03:18 PM
    Location
    Tennessee
    Posts
    550
    Local Date
    04-25-2024
    Local Time
    06:46 AM
    Thread Starter
    I was out of own on a business trip. I was killing time after my meeting was over & before I had to be at the airport & didn't have a camera with me. The stock & butt plate looked that same as the one in the second link above; pistol grip; grasping grooves with a solid butt plate (no trap) & with coase checkering.

    Ah well, i'td been a hassle to book air passage for it on short notice.

  9. #7
    Contributing Member Herschel's Avatar
    Join Date
    Mar 2009
    Last On
    04-20-2024 @ 04:48 PM
    Location
    Arkansas
    Posts
    254
    Local Date
    04-25-2024
    Local Time
    06:46 AM
    Kirk, An M2 with the three digit serial number would have been made up with the early , non-adjustable, M2 bolt. It is easily redognized as the locking lug is just like a 1903 safety lug. Nearly all the 4,300 or so that came with the non-adjustable bolt have had the bolts replaced with the one with the headspace adjustment. The magazine should fit almost flush with the floorplate. The rifle would not have been drilled and tapped for scope blocks when new. The scope blocks holes will substantially reduce the value of the rifle. The Lyman 48 with the elevation marked to 125 is correct for the rifle. However, it is not what is referred to as a long slide. The long slide version is numbered to 150. Lyman's production of slides numbered as low as 60 have caused confusion as to what is a long slide. The seller will be lucky to get half the $1,500 asking price.

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    joefriday22's Avatar
    Join Date
    Jun 2009
    Last On
    12-09-2013 @ 03:53 PM
    Posts
    13
    Local Date
    04-25-2024
    Local Time
    06:46 AM
    I went to a local gun shop a few weeks ago and they had two 1922 M1icon's behind the counter. They were both in excellent condition, with original blued/black finish and original configuration with no upgrades. One was serial number 34,,yes 34 and it was $1,499 and the other was in the same condition serial number 1,7?? and was $999....both already sold..

    They are still behind the counter as of today and still not paid for.

+ Reply to Thread

Similar Threads

  1. MI1 Cal. .22 Model of 1922
    By twkersh in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 0
    Last Post: 05-26-2009, 04:06 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts