+ Reply to Thread
Results 1 to 9 of 9

Thread: Restamped bolt!??

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    31pickemup's Avatar
    Join Date
    Mar 2009
    Last On
    11-18-2011 @ 10:27 AM
    Posts
    54
    Local Date
    04-25-2024
    Local Time
    11:20 AM

    Restamped bolt!??

    Hello all
    I pickem up a 1942 Byf at a local show today. It has no import marks and has not been reblued. The stock has to be a RC as there is a four digit number stamped into the butt stock. The other things that are weird are the bands. They have the last two serials stamped into it but no waffenapts. Also the bolt has the original finish but has been restamped over the other numbers. Did the Germans ever do this? Ill get some pictures of it on later. The rifle looks great and has a original cleaning rod in it. I didn't pay a whole lot for it. But I like to learn about these things so I can get better at identifying.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by 31pickemup; 11-14-2009 at 11:38 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Administrator

    Site Owner
    Badger's Avatar
    Join Date
    Oct 2006
    Last On
    @
    Location
    Toronto, Canada
    Age
    75
    Posts
    12,944
    Real Name
    Doug
    Local Date
    04-25-2024
    Local Time
    11:20 AM
    My Videos in Video Club
    12
    Pics would definitely help ...

    Thanks ..

    Regards,
    Badger

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    31pickemup's Avatar
    Join Date
    Mar 2009
    Last On
    11-18-2011 @ 10:27 AM
    Posts
    54
    Local Date
    04-25-2024
    Local Time
    11:20 AM
    Thread Starter
    Ok pics posted. Probably will use it as a reenacting gun.

  6. #4
    Legacy Member kar98k's Avatar
    Join Date
    Oct 2009
    Last On
    02-13-2021 @ 05:50 PM
    Location
    PHX
    Posts
    327
    Local Date
    04-25-2024
    Local Time
    10:20 AM
    may not have been an RC. may have been another country that captured it (also may have been humped by somebody trying to make it more authentic). the Germans never stamped their serial number on that location on the bands.

  7. #5
    Administrator

    Site Owner
    Badger's Avatar
    Join Date
    Oct 2006
    Last On
    @
    Location
    Toronto, Canada
    Age
    75
    Posts
    12,944
    Real Name
    Doug
    Local Date
    04-25-2024
    Local Time
    11:20 AM
    My Videos in Video Club
    12
    We'll, if you refer to any library entry for a K98kicon in the Germany - Milsurp Knowledge Library (click here), with thanks to Advisory Panelicon member Claven2, youl'll find an excellent article under each Collectors Comments and Feedback section which addresses that question.

    I've copied one here for your reference.



    2. CAUTION: How do I tell if I have a rebuilt RC (Russian Capture) and not an original unaltered K98k?

    Russian Capture K98k's all share similar traits. The are all WW2 era German Karabiners (though some are former Gew98's the Nazis had converted to K98k spec - rare though!). Most have matching receiver and barrel.

    When the Russians came into these guns they stockpiled them and promptly began doing other more important things like rebuilding their cities, etc. Many RC rifles sat for month or even years exposed to the elements. By the late 1940's, many of these rifles were in an advanced state of deterioration, while some remained like new.

    In true Russian style, a colossal public make-work project was undertaken. The ENTIRE inventory of German small arms then in Russian possession (roughly half the total wartime output of Nazi Germany's arms production) was ordered to undergo refurbishment and as many useable arms as possible to be made ready. Why? Russiaicon was paranoid. The Cold War was freezing over and Russia feared invasion from the West. Also, it was a cheap source of arms they could export to allies in North Korea, Cuba, Vietnam, and every other wanna-be commi armpit of the world without depleting their "front line" weapons stockpiles.

    The Russians took all their K98k's, and totally disassembled them except for the barrel. Bores were inspected and those found to be acceptable (ie, some pitting OK - so long as it's still safely shootable, much like with their refurbed Mosins) were set aside. Those that were deemed too far gone were recycled into steel for tractor parts or Order of Lennin medals, or whatever.

    The small parts were all hot-dip reblued. Rusty parts were wire brushed or sandblasted first. These were placed indiscriminately in bins. The stocks were also inspected for serviceability. Those deemed acceptable were retained, those unacceptable were burned.

    When the rifles were re-assembled no effort was made to match parts. A new (used) bolt was assembled and fitted to the receiver and the whole affair was assembled into a rifle from the binned parts. When done, most parts were electropencilled with the rifle's serial number and a flat was sanded on the left side of the wood stock (think big belt sander and half-drunk worker). The rifle's serial number was stamped there running parallel to the rifle's bore line. (Yugos are stamped perpendicular, for comparison)

    Once complete, the whole rifle was generally painted in cheap shellac as a preservative agent - these are often not cosmolened for some reason - crated up and sent to war reserve, especially in the frontier states like Ukraine (which stored them in underground "nuclear proof" depleted salt mines). Today, cash strapped former Soviet states are all too happy to sell these to us.

    It's difficult to say what percentage of captured arms survived the rebuild programs, but I'd imagine maybe half (or less) would be a good guess. Many of these arms sat out in the open for LONG periods of time before being rebuilt, so attrition due to the elements was probably a factor.

    It's also wrong to assume that RC's are, in fact, "captures". At any given moment, less than 2 million Nazi troops would have served on the Russian front. Not all would have had K98K's. Over 14 Million K98k's were built and most experts agree that somewhere around 7 million likely ended up in Russian hands after the war. Throughout the whole war, it's doubtful a full 7 million K98k's traveled to east Prussia and beyond.

    When Nazi Germany surrendered to the Allies, the Whermacht assembled at depots all over Europe and turned in their arms. Additionally, government arms stockpiles and factories were captured and divied up by the victorious armies. At hostilities cessation, every Mauser weapon in the future East Germany (and all points east) would have become what we think of as an "RC K98k". Public ownership of guns in the USSR was banned as well. So whether a rifle was taken from a dead private in 1944 Minsk or if the NKVD knocked on a door in Berlin in 1947 and confiscated the arm from a retired volkspolitzei prison guard, it still ended up in the stocks of RC mausers. In fact, it's safe to say the MAJORITY of such guns are likely NOT battlefield captures.
    ...... (Feedback by "Claven2")

    Regards,
    Badger

  8. #6
    Legacy Member Calif-Steve's Avatar
    Join Date
    Mar 2009
    Last On
    10-01-2023 @ 12:52 AM
    Posts
    2,508
    Local Date
    04-25-2024
    Local Time
    10:20 AM
    I have a CE Mod98 that was rebuilt at DOT just prior to the war's end. They did grind off the CE marking and re-stamped the rifle the old stamps remain visible. I would guess the rifle in question ended up in the Dutch/Luxumburg Army. Not a Germanicon rebuild.

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    Sarge's Avatar
    Join Date
    Mar 2009
    Last On
    04-16-2018 @ 03:38 AM
    Location
    Colorado
    Age
    88
    Posts
    580
    Local Date
    04-25-2024
    Local Time
    09:20 AM
    Your rifle has a Jugoslav stock. I don't see any over stamp on bolt nrs.
    Neither the Jugoslavs or ruskies stamped nrs on top of nrs. The nrs on the bbl band you show are not Germanicon, maby Jugoslav?
    I would expect that it is one of the Jugoslavs imported before the RCs came into the country - maby 15+ yrs ago. Many of those were almost matching rifles.
    Sarge

  10. #8
    Legacy Member bearhunter's Avatar
    Join Date
    Oct 2006
    Last On
    Today @ 08:14 AM
    Location
    Okanogan, BC
    Posts
    509
    Local Date
    04-25-2024
    Local Time
    08:20 AM
    It certainly looks like the Yugoslav Mauser I have. I don't know if I agree with the premise that Yugoslaviaicon didn't re stamp numbers though. I have one that the bold has obviously been re stamped, on the side of the bolt handle. The rest of the numbers on the bolt, match the receiver and stock. Mine has the Yugo crest on top of the receiver. The Czechicon stamps have been ground away and replaced with Cyrillic letters and numbers instead. Your receiver is clean and looks to be in original condition. Are there any Cyrillic stamps on the left side?

  11. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    hoosier8's Avatar
    Join Date
    Mar 2010
    Last On
    12-20-2012 @ 08:39 AM
    Posts
    1
    Local Date
    04-25-2024
    Local Time
    10:20 AM
    Definetly a restamped bolt. Here is a pic I found of a BYF42 that has not been restamped. The giveaway is the bolt handle surface has been ground down and the raised plateau is not there anymore, plus the fonts are wrong.

    Since it is in a RC stock, i would guess that someone here did it to try to fool the unsuspecting. K98icon's are kind of getting to be a minefield if you do not know what to look for.

    Looks like a nice gun and I hope it shoots well. Enjoy it.

+ Reply to Thread

Similar Threads

  1. Winchester M-1 Garand bolt and H&R M-14 bolt
    By Light Infantry in forum M1 Garand/M14/M1A Rifles
    Replies: 4
    Last Post: 06-25-2011, 01:46 PM
  2. Bolt Release lever or do you rotate the bolt head?
    By Williamb in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 12
    Last Post: 06-05-2009, 01:04 PM
  3. J5 Bolt
    By Calif-Steve in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 0
    Last Post: 04-14-2009, 09:20 PM
  4. Underwood Stock.......Restamped?
    By painter777 in forum M1/M2 Carbine
    Replies: 8
    Last Post: 03-29-2009, 03:22 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts