+ Reply to Thread
Results 1 to 8 of 8

Thread: Remington 03A3

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member NP2650's Avatar
    Join Date
    Mar 2009
    Last On
    01-21-2022 @ 11:42 PM
    Location
    West Coast
    Posts
    27
    Real Name
    Rick Sturm
    Local Date
    03-29-2024
    Local Time
    03:12 AM

    Remington 03A3

    I picked up this Remington 03A3 from an estate. It was found with several other WWII era rifles including a m1903, M1917, a Mauser, and a Airsaka. I took the 03A3 and M1917 because they were the pick of the litter. My buddy took the Mauser and Arisakaicon. Unfortunately, the M1903 was in sorry condition.

    All of the parts on this rifle that are marked are marked for Remington, including the barrel that is marked RA 6-43. The serial on the receiver is 3800XXX. The finish is a combination of blued and parkerized parts. All of the metal parts are covered with cosmolineicon, in fact we had to remove a plug of cosmoline from the muzzle to gauge it. It gauged at less than ½ on a CMPicon gauge. The stock is the only part that looks to have any wear. The stock has no cartouche, but is marked with a “P” behind the trigger guard. It came with a nice 1907 sling.

    I’m a Garandicon guy so I have only basic knowledge of 03A3s. Can you guys tell me the approximate date of the receiver and whether the barrel appears correct? Does the rest of the rifle appear correct? Lastly, what is a good reference book on the 1903s and 1903A3s? Thanks.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel John Beard's Avatar
    Join Date
    Oct 2008
    Last On
    Yesterday @ 10:33 PM
    Location
    Sweet Home Alabama
    Posts
    1,062
    Local Date
    03-29-2024
    Local Time
    06:12 AM
    Quote Originally Posted by NP2650 View Post
    I picked up this Remington 03A3 from an estate. It was found with several other WWII era rifles including a m1903, M1917, a Mauser, and a Airsaka. I took the 03A3 and M1917 because they were the pick of the litter. My buddy took the Mauser and Arisakaicon. Unfortunately, the M1903 was in sorry condition.

    All of the parts on this rifle that are marked are marked for Remington, including the barrel that is marked RA 6-43. The serial on the receiver is 3800XXX. The finish is a combination of blued and parkerized parts. All of the metal parts are covered with cosmolineicon, in fact we had to remove a plug of cosmoline from the muzzle to gauge it. It gauged at less than ½ on a CMPicon gauge. The stock is the only part that looks to have any wear. The stock has no cartouche, but is marked with a “P” behind the trigger guard. It came with a nice 1907 sling.

    I’m a Garandicon guy so I have only basic knowledge of 03A3s. Can you guys tell me the approximate date of the receiver and whether the barrel appears correct? Does the rest of the rifle appear correct? Lastly, what is a good reference book on the 1903s and 1903A3s? Thanks.
    Your rifle has been arsenal-overhauled, refinished, and re-assembled from mixed parts. This was common among '03-A3's that saw service during WWII. Your rifle appears to have been preserved in good condition since then. You should be justly proud.

    The serial number and barrel date are a good match. Your rifle, therefore, very likely has its original barrel. The inspection stamp in the stock has apparently been worn or sanded away. The original stamp was "FJA" which may or may not have been enclosed in a rectangle, along with an Ordnance Escutcheon (crossed cannons) and "RA" to signify manufacture by Remington Arms.

    The best reference book on 1903's is The Springfield 1903 Rifles by Lt. Col. William S. Brophy. The best reference book on the WWII rifles is The '03 Springfield's Era by Clark S. Campbell. The best, latest, and up-to-date information can be secured right here on this forum.

    Hope this helps. And congratulations!

    J.B.

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member NP2650's Avatar
    Join Date
    Mar 2009
    Last On
    01-21-2022 @ 11:42 PM
    Location
    West Coast
    Posts
    27
    Real Name
    Rick Sturm
    Local Date
    03-29-2024
    Local Time
    03:12 AM
    Thread Starter
    I assumed that it was probably arsenal overhauled, but what are the tell tale signs on this rifle?

  6. #4
    Advisory Panel Chuckindenver's Avatar
    Join Date
    Mar 2009
    Last On
    Yesterday @ 12:38 PM
    Location
    Denver Co
    Age
    61
    Posts
    3,152
    Real Name
    chuck
    Local Date
    03-29-2024
    Local Time
    05:12 AM
    parkerized parts,
    only the receiver, barrel, safety lever, and front sight base were phosphate, the rest would be blued finish.
    though having one or 2 small parts doesnt make it an overhual, some were simply repaired.
    with that many parkerized parts, its a overhual.

  7. #5
    Advisory Panel John Beard's Avatar
    Join Date
    Oct 2008
    Last On
    Yesterday @ 10:33 PM
    Location
    Sweet Home Alabama
    Posts
    1,062
    Local Date
    03-29-2024
    Local Time
    06:12 AM
    Oops!

    I note that the rifle appears to be fitted with a Smith-Corona stock. The stock, therefore, would have had no "RA" stamp.

    J.B.

  8. #6
    FREE MEMBER
    NO Posting or PM's Allowed
    deserttrans's Avatar
    Join Date
    Sep 2009
    Last On
    10-20-2010 @ 11:15 PM
    Location
    Near Phoenix, Arizona
    Posts
    45
    Local Date
    03-29-2024
    Local Time
    04:12 AM
    What specific stamps would be on a stock that was rearsnal-overhauled at an armory?

  9. #7
    Advisory Panel John Beard's Avatar
    Join Date
    Oct 2008
    Last On
    Yesterday @ 10:33 PM
    Location
    Sweet Home Alabama
    Posts
    1,062
    Local Date
    03-29-2024
    Local Time
    06:12 AM
    Quote Originally Posted by deserttrans View Post
    What specific stamps would be on a stock that was rearsnal-overhauled at an armory?
    During WWII, the Army had a number of arsenals and depots overhauling M1903 series rifles. Some inspection stamps would include:

    AAx = Augusta Arsenal, x = inspector's last initial
    RIA/FK = Rock Island Arsenal, Frank Krack
    RA-P = Raritan Arsenal, Harry Peterson
    BAWL = Benecia Arsenal, William Lewis
    SAAx = San Antonio Arsenal, x = inspector's last initial
    O.G.E.K. = Ogden Arsenal, Elmer Keith

    to name a few.

    J.B.

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    RBruce's Avatar
    Join Date
    Mar 2009
    Last On
    10-13-2019 @ 08:28 AM
    Location
    Raleigh, NC
    Age
    80
    Posts
    661
    Local Date
    03-29-2024
    Local Time
    07:12 AM
    It would be helpful to see information like this included on ViShooters '03 web site. Any chance for a collaboration?

+ Reply to Thread

Similar Threads

  1. New Remington 03A3
    By BarnacleBill in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 17
    Last Post: 10-03-2009, 06:57 PM
  2. Remington 03A3 with blued receiver and barrel
    By RBruce in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 2
    Last Post: 08-06-2009, 10:42 AM
  3. Remington 03A3 purchase
    By smle-man in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 14
    Last Post: 06-28-2009, 10:21 PM
  4. Need help with Remington 03A3 buttplate identification
    By RBruce in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 5
    Last Post: 05-01-2009, 07:25 AM
  5. Late Remington 03a3
    By Roy in forum M1903/1903A3/A4 Springfield Rifle
    Replies: 8
    Last Post: 03-11-2009, 03:16 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks