+ Reply to Thread
Results 1 to 7 of 7

Thread: 1898 Krag rifle...

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    coneten's Avatar
    Join Date
    Mar 2009
    Last On
    07-18-2013 @ 06:37 PM
    Posts
    175
    Local Date
    04-16-2024
    Local Time
    05:17 PM

    1898 Krag rifle...

    I went back to the shop and snagged another Kragicon rifle. This one is Model 1898, SN# 232262, it has a cartouche with a 1902 date, also a circle cartouche under stock, a stamped rack #5 on right side butt stock. The butt plate is solid so not correct for this rifle?. Exterior metal and wood look original and in very good condition, bore is strong. I am having a difficult time figuring out the rear sight...It has no windage knob, is a ladder affair to 1100 yds. V notched slider that does not make contact with the sight base rails...missing parts? Will attempt pics later.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by coneten; 02-19-2010 at 02:51 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    FREE MEMBER
    NO Posting or PM's Allowed
    coneten's Avatar
    Join Date
    Mar 2009
    Last On
    07-18-2013 @ 06:37 PM
    Posts
    175
    Local Date
    04-16-2024
    Local Time
    05:17 PM
    Thread Starter

    lets try some pics...







    Might have better luck this time....as mentioned the butt plate is solid and I have not removed it yet. The rear sight does not seem right.
    Last edited by Badger; 03-18-2010 at 07:51 PM. Reason: Edited pics for member to fix links

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    5MadFarmers's Avatar
    Join Date
    Apr 2009
    Last On
    04-01-2018 @ 01:06 AM
    Posts
    125
    Local Date
    04-16-2024
    Local Time
    05:17 PM
    That, my friend, is the first I've ever seen. I saw a trapdoor once and it had an 1896 Kragicon sight on it. Your Krag is the first time I've seen a Krag with a trapdoor sight. Not completely though. It's an 1877 trapdoor sight mounted on a Krag 1896 base. That is perhaps one of the strangest things I've seen on a Krag.

    Stock is later than gun. I'd wager there are holes under that buttplate as only the 1892 stocks didn't have them and that isn't an 1892. Not unless somebody discovered a magical method of beefing up the wrist in a way I can't detect. Very unlikely.

    Swapping out those 1877 bits for 1896 bits would help that gun greatly.

    All in all that's actually not a bad gun. Not bad at all.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    coneten's Avatar
    Join Date
    Mar 2009
    Last On
    07-18-2013 @ 06:37 PM
    Posts
    175
    Local Date
    04-16-2024
    Local Time
    05:17 PM
    Thread Starter
    The holes are in the butt...one of the screws is much larger than the other. So I am going to National Gun Day tomorrow..I am going to be looking for a rear sight and a butt plate. What might I expect to pay and is there something in particular as far as the rear sight? I looked at the various sights and realized the one on this rifle was too weird.

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    5MadFarmers's Avatar
    Join Date
    Apr 2009
    Last On
    04-01-2018 @ 01:06 AM
    Posts
    125
    Local Date
    04-16-2024
    Local Time
    05:17 PM
    I got distracted doing other things.

    5 Krag Rifle Sight - eBay (item 260549204183 end time Feb-18-10 18:06:49 PST)

    Hurt not to get a bid in there. That is what you need. Just one.

  8. #6
    Legacy Member andiarisaka's Avatar
    Join Date
    Dec 2008
    Last On
    02-22-2024 @ 04:00 PM
    Location
    Upper Appalachia aka SE Ohio
    Posts
    343
    Local Date
    04-16-2024
    Local Time
    04:17 PM
    I saw a Buffington trpdoor rear sight on a Kragicon once, can't recall which auction house had it now, I had more pics sent to me because it had a windage knob at the front, thought it might have been one of those 1905 Krag sights. I hope that's grease I see around the receiver and sideplate, and not some attempt at glass bedding.

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    coneten's Avatar
    Join Date
    Mar 2009
    Last On
    07-18-2013 @ 06:37 PM
    Posts
    175
    Local Date
    04-16-2024
    Local Time
    05:17 PM
    Thread Starter
    The story gets complicated. That is grease BTW. I found sportered Kragicon rifle today at a show..1898 SN#125822. Chopped stock, no hand guard, very good metal..but a perfect bore....$250 So I planned to do some tinkering and get the initial rifle up to snuff...removed the wood and discovered that the flat base of the receiver/ mag base was cracked about half way across.....and there was some play when pressed hard with fingers. So I decided that the rifle I scored today would have to be the "one". It is looking good but I am having a difficult time getting the long screw to seat into the front nose cap. I now have extra swivels, bolt etc but am very disappointed at the cracked receiver. The sporter stock was made slimmer with a pronounced comb..in his infinite wisdom, the creator also ground down the edges of the butt plate so it is useless..the wood is proud about 1/4 inch around the sides. Live and learn!
    Last edited by coneten; 03-14-2010 at 04:30 PM.

+ Reply to Thread

Similar Threads

  1. 1898 krag handguard
    By kwc271 in forum Krag Rifles
    Replies: 5
    Last Post: 02-12-2010, 10:21 AM
  2. 1898 Krag with a threaded bore
    By jj026 in forum Krag Rifles
    Replies: 0
    Last Post: 12-30-2009, 08:08 PM
  3. 1898 (1901) Krag
    By c&rfan in forum Krag Rifles
    Replies: 6
    Last Post: 08-22-2009, 08:48 PM
  4. 1898 Krag
    By tinbender in forum Krag Rifles
    Replies: 21
    Last Post: 05-31-2009, 11:10 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts