+ Reply to Thread
Results 1 to 7 of 7

Thread: Early Type 38 - What Kind of Wood?

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    pdawg1911's Avatar
    Join Date
    Mar 2009
    Last On
    05-16-2010 @ 08:15 PM
    Posts
    40
    Local Date
    04-24-2024
    Local Time
    12:56 PM

    Early Type 38 - What Kind of Wood?

    I received and just finished cleaning a Type 38. Everything that has a 3 digit number on it matches to the assembly number of 361 or the receiver's last 3 of 009, except for the dust cover. Looks like original finish to me. The serial number is a 960009, putting it somewhere in the 1920's I would speculate since they went to the series blocks of 99,999 around 1933. What is with all the black spotches on the wood's finish? At first I thought they were burn marks, but also noticed them on the inside of the stock that seats the barreled action.

    If any one has any information about this particular rifle, please feel free to educate me as this is my first Type 38. Also, the bolt is in the white, except for the cocking handle is blued. Is that correct?

    Thanks
    Pat
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel riceone's Avatar
    Join Date
    Oct 2006
    Last On
    08-15-2020 @ 09:04 PM
    Location
    Mississippi
    Age
    90
    Posts
    145
    Local Date
    04-24-2024
    Local Time
    11:56 AM
    Cocking handle is not blue, just discolored by handling and age. It was bright too. You have a very nice rifle. I never put a dust cover on a rifle if it did not come with one. And don't leave one on a rifle if it does not match. Very disirable 38 rifle. riceone

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member Milsurp Collector's Avatar
    Join Date
    Apr 2008
    Last On
    @
    Location
    USA
    Posts
    209
    Local Date
    04-24-2024
    Local Time
    08:56 AM
    The dark marks in the wood are just the effects of time on the dents. I have a light walnut K98kicon stock that looks similar, the dents are dark.

    Very nice rifle! You really couldn't do much better for your first Type 38.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    pdawg1911's Avatar
    Join Date
    Mar 2009
    Last On
    05-16-2010 @ 08:15 PM
    Posts
    40
    Local Date
    04-24-2024
    Local Time
    12:56 PM
    Thread Starter
    Quote Originally Posted by riceone View Post
    Cocking handle is not blue, just discolored by handling and age. It was bright too. You have a very nice rifle. I never put a dust cover on a rifle if it did not come with one. And don't leave one on a rifle if it does not match. Very disirable 38 rifle. riceone

    I took the dust cover off, and it is already stowed away, separate from the rifle. I attached a photo of the bolt grouping. If you look at the bluing color, the line between the white and color looks too perfectly cut to be a naturally occurring effect. Unless the dust cover protected it?? On sight inspection, I would think it was blued, but this is the only 38 I have owned, or even held, so I have no basis for comparison.

    Regards,
    Pat

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    pdawg1911's Avatar
    Join Date
    Mar 2009
    Last On
    05-16-2010 @ 08:15 PM
    Posts
    40
    Local Date
    04-24-2024
    Local Time
    12:56 PM
    Thread Starter
    Quote Originally Posted by Milsurp Collector View Post
    The dark marks in the wood are just the effects of time on the dents. I have a light walnut K98kicon stock that looks similar, the dents are dark.

    Very nice rifle! You really couldn't do much better for your first Type 38.
    Thanks - Do anyone know what type of tree was used for the stock? Cherry? Birch?

    Thanks

  8. #6
    Legacy Member Milsurp Collector's Avatar
    Join Date
    Apr 2008
    Last On
    @
    Location
    USA
    Posts
    209
    Local Date
    04-24-2024
    Local Time
    08:56 AM
    Quote Originally Posted by pdawg1911 View Post
    Thanks - Do anyone know what type of tree was used for the stock? Cherry? Birch?

    Thanks
    oni-gurumi Japaneseicon Walnut (Juglans ailantifolia) also known as Siebold Walnut (Juglans sieboldiana)

    buna Japanese Beech (fa gus crenata) also known as Siebold's beech

    katsura tree (Cercidiphyllum japonicum)

    Some Type 38s had blued bolt handles, but not yours originally. It is possible that someone blued the bolt handle, it looks a little too nice. Maybe a previous owner mistakenly thought the handle was supposed to be blued and "restored" it. The bluing on the bolt handle should have at least some wear since the bolt handle was frequently "handled".




    If the bolt handle was reblued it raises the question as to whether the whole rifle was reblued. The bluing on your rifle is in unusually good condition for a rifle that old.

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    conductor's Avatar
    Join Date
    Mar 2009
    Last On
    12-01-2013 @ 08:17 PM
    Location
    Loudoun County, Virginia
    Posts
    94
    Local Date
    04-24-2024
    Local Time
    11:56 AM
    A quick look at the picture shows that the rifle in question obviously has a rust blue finish. There are very few gunsmiths in the US that do rust blueing... nearly all of them use the hot salts process, which results in a totally different color of blue. In addition, the small rust specks visible on the tang and receiver are not at all indicative of a reblue.
    There's no doubt in my mind that the finish on this rifle is original.

    WHOOPS! I was looking at the picture directly above this post, not at the pictures in the OP. The pictures in the OP show a rifle that is much different from the one directly above. I have to agree with "Milsurp Collector" that the finish on the OP's rifle doesn't look quite right for a gun with original finish.
    Last edited by conductor; 05-25-2010 at 07:40 PM.

+ Reply to Thread

Similar Threads

  1. What kind of m1 carbine is this?
    By m1carbinemike in forum M1/M2 Carbine
    Replies: 17
    Last Post: 12-13-2009, 11:51 AM
  2. Which type wood?
    By jojoevo in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 2
    Last Post: 12-10-2009, 09:56 PM
  3. Sorta.....kind of OT-
    By ltcboy in forum M1 Garand/M14/M1A Rifles
    Replies: 5
    Last Post: 10-20-2009, 12:45 AM
  4. what type WOOD are CMP stock sets
    By AKA Hugh Uno in forum M1 Garand/M14/M1A Rifles
    Replies: 7
    Last Post: 04-20-2009, 11:06 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts