+ Reply to Thread
Page 3 of 7 FirstFirst 1 2 3 4 5 ... LastLast
Results 21 to 30 of 69

Thread: Building the BP trade rifle from a TOTW kit

Click here to increase the font size Click here to reduce the font size
  1. #21
    FREE MEMBER
    NO Posting or PM's Allowed
    Doug Rammel's Avatar
    Join Date
    Mar 2009
    Last On
    01-15-2015 @ 11:22 PM
    Location
    SW Ohio
    Posts
    141
    Local Date
    03-19-2024
    Local Time
    03:39 AM
    Excellent work but the lock seems to be on the wrong side.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #22
    Senior Moderator
    (Founding Partner)


    Site Founder
    Claven2's Avatar
    Join Date
    Oct 2006
    Last On
    08-09-2023 @ 10:17 PM
    Location
    Scandaltown, Ontario
    Posts
    3,242
    Real Name
    Ronald
    Local Date
    03-19-2024
    Local Time
    03:39 AM
    Thread Starter
    A little more progress to show. As you may have guessed, the lock inlet for the internals was roughed out in the mill and scraped to size with chisels. Unfortunately, the Lehman was designed for a percussion lock, and the flintlock they sell with it causes a few inletting compromises - more on that in a moment.

    You also end up with a paper-thin gap between the ramrod channel and the mainspring inlet. In my case, it broke through in one spot, but hte spring doesn;t foul the rod - I've checked, so this isn't a noteworthy concern. I also slipped once with the chisel and broke into the barrel channel when inletting for the mainspring hooks - again, just a cosmetic issue that will only be obvious if you pull the barrel. On these guns, the barrel typically remain pinned in though.

    On the whole I'm well enough pleased with the lock inletting. It's fully functional with no fouling of the internals and seats nice and tight.

    The compromise I referred to is that because it's a flintlock, there is precious little room for the sidenail. I put it as far as possible back on the lock ledge, but it still broke into the inletting for the breech plug. I could have put it right through the breech plug, but I wanted it to be possible to remove the barrel without removing the lock in case anyone ever tries to do that. I therefore slightly relieved the breech plug to accommodate.

    Inletting for the lock:


    Drilled and lock threaded, sidenail installed. Pretty long huh!?


    Here you can see where the sidenail breaks through the breech plug inlet. You can also see the small spot I mentioned where I slipped and the chisel broke into the barrel channel. Oh well, I'm not perfect, it seems.



    Couldn't have gotten the sidenail back much farther on this lock. It is nice and functional though.



    Relieved breech plug:



    On another note, the sidenail TOTW sells with this kit is not threaded anywhere near long enough. If you cut it to length, there is no thread left. I had to more than double the length of threading (cut new threads) to make it usable.

    To drill the sidenail, you drill through the installed lock and stock as a single unit with whichever drill is indicated for your tap that you will ultimately thread the lockplate with. Then you remove the lockplate (without removing the stock from your jig) and change drills to a size that is 3 or 4 thou larger than the diameter of your sidenail shank and re-drill the same hole (stock only). Once you tap your lock, you should have a perfectly aligned lock, stock hole and sidenail. After the stock is thinned down (the lock is rather recessed when first inlet), you later inlet the sidenail plate on the side opposite the lock.
    Союз нерушимый республик свободных Сплотила навеки Великая Русь. Да здравствует созданный волей народов Единый, могучий Советский Союз!

  4. The Following 3 Members Say Thank You to Claven2 For This Useful Post:


  5. Avoid Ads - Become a Contributing Member - Click HERE
  6. #23
    Moderator
    (Lee Enfield Forum)


    tbonesmith's Avatar
    Join Date
    Sep 2007
    Last On
    03-05-2024 @ 02:45 AM
    Location
    Sydney, Australia
    Posts
    1,076
    Real Name
    Thomas Smith
    Local Date
    03-19-2024
    Local Time
    07:39 PM
    These kits look like a frightening amount of work.

  7. #24
    Senior Moderator
    (Founding Partner)


    Site Founder
    Claven2's Avatar
    Join Date
    Oct 2006
    Last On
    08-09-2023 @ 10:17 PM
    Location
    Scandaltown, Ontario
    Posts
    3,242
    Real Name
    Ronald
    Local Date
    03-19-2024
    Local Time
    03:39 AM
    Thread Starter
    Perhaps "kit" isn;t really the right term. It's a piece of maple with a barrel channel partiall inlet and a bag full of steel castings. Also a barrel blank. That about sums it up. But, if you like building rifles from basically scratch, this is a way to go that ensures you have most of the material on hand.
    Союз нерушимый республик свободных Сплотила навеки Великая Русь. Да здравствует созданный волей народов Единый, могучий Советский Союз!

  8. Thank You to Claven2 For This Useful Post:


  9. #25
    Moderator
    (Lee Enfield Forum)


    tbonesmith's Avatar
    Join Date
    Sep 2007
    Last On
    03-05-2024 @ 02:45 AM
    Location
    Sydney, Australia
    Posts
    1,076
    Real Name
    Thomas Smith
    Local Date
    03-19-2024
    Local Time
    07:39 PM
    I enjoy long term projects, I'm not really keen on black powder, but this looks like a good one. It looks very challenging. Do you keep them all when you're finished (builds, restorations etc.)or move them on?

  10. #26
    Senior Moderator
    (Founding Partner)


    Site Founder
    Claven2's Avatar
    Join Date
    Oct 2006
    Last On
    08-09-2023 @ 10:17 PM
    Location
    Scandaltown, Ontario
    Posts
    3,242
    Real Name
    Ronald
    Local Date
    03-19-2024
    Local Time
    03:39 AM
    Thread Starter
    Most I keep, but sometimes I'll sell one or two here an there. Once you put so much effort into something, it's hard to let it go.

    I can build an entire AR15 from parts in an evening and there is therefore nowhere near as much attachment to one of those. A flintlock long rifle can take me months to finish - totally different story
    Союз нерушимый республик свободных Сплотила навеки Великая Русь. Да здравствует созданный волей народов Единый, могучий Советский Союз!

  11. #27
    Senior Moderator
    (Founding Partner)


    Site Founder
    Claven2's Avatar
    Join Date
    Oct 2006
    Last On
    08-09-2023 @ 10:17 PM
    Location
    Scandaltown, Ontario
    Posts
    3,242
    Real Name
    Ronald
    Local Date
    03-19-2024
    Local Time
    03:39 AM
    Thread Starter
    So I inletted the sidenail escutcheon. The one that comes with the kit has a squared anti-rotation tab, but the round version is easier to inlet so I cheated and filed the tab to a round point so I could just do 90% of the inlet on the mill. I intent to brown this part in-situe as I'm finishing the stock, so I actually epoxied it into the inletting and left slightly proud, then used a belt sander to take it flush.



    It was then time to move on to the double-set trigger assembly. Positioning here is REALLY picky and finicky as you have about 1/16" or fore-aft movement to play with, elsewise either the trigger will only work in single-set or only in double-set but not both. Often, even if uou get it perfect, you will have to tweak the sear bar on the lock (as I had to do) to get the sear low enough to be contacted by the triggers. This is far less an issue with a standard non-set trigger.

    Start by measuring, marking in pencil, then carving the outline with an edging chisel.



    The rough out the inlet.



    Now star the inlet for the trigger bars and switch to inletting black on all contacting surfaces so you know where to remove wood.



    I didn't take a picture, but you do the same with the main trigger spring. In this photo the triggers are fully inlet and the retainer screw for the main trigger spring is filed and sanded flush to the trigger plate.



    Here you can see where I had to bend the sear bar to get it low enough to reliably fire. You do NOT want to lose temper in the sear up by the tumbler, so I clamped the sear between large blocks of aluminum to leech the heat away from the tip and use an OA torch to spot-heat it where the bend is.



    And here is the inletting.



    You'll also note I added a retainer screw for the rear of the trigger plate and you can see the inlets for the two trigger guard tenons which will be pinned in later.



    Trigger guard is trial fit. Next we will have to slightly inlet the tangs down into the stock, a mm or two.



    More to follow.
    Союз нерушимый республик свободных Сплотила навеки Великая Русь. Да здравствует созданный волей народов Единый, могучий Советский Союз!

  12. Thank You to Claven2 For This Useful Post:


  13. #28
    Senior Moderator
    (Founding Partner)


    Site Founder
    Claven2's Avatar
    Join Date
    Oct 2006
    Last On
    08-09-2023 @ 10:17 PM
    Location
    Scandaltown, Ontario
    Posts
    3,242
    Real Name
    Ronald
    Local Date
    03-19-2024
    Local Time
    03:39 AM
    Thread Starter
    So I finished doing the last little bit of fine inletting on the trigger guard and drilled and pinned it in place. I had to relieve the trigger mechanism slightly on the tips to allow the trigger guard to fully seat. Also, when cocking the rear trigger there was a minute amount of contact at the back of the trigger bow on the decorative tip. I used the OA torch to heat and bend that back slightly to give nicer clearance. In this photo you see the set trigger at full cock.



    And here is the finished inlet:



    Finally, I have laid out the buttplate for a 14.5" pull to the let-off trigger. Next I'll have to rough that out on the bandsaw. It's coming along...

    Союз нерушимый республик свободных Сплотила навеки Великая Русь. Да здравствует созданный волей народов Единый, могучий Советский Союз!

  14. #29
    Senior Moderator
    (Founding Partner)


    Site Founder
    Claven2's Avatar
    Join Date
    Oct 2006
    Last On
    08-09-2023 @ 10:17 PM
    Location
    Scandaltown, Ontario
    Posts
    3,242
    Real Name
    Ronald
    Local Date
    03-19-2024
    Local Time
    03:39 AM
    Thread Starter
    Buttplate inletting time I roughed out the cut to the crescent shape pencilled on using a band saw (handy item). After that, I roughly inletted the domed tang. Commercial guns save time here by just machining the stock inlet square and it's hollow under the buttplate. That is lazy and IMHO has no place on a hand-made rifle, so I will inlet that to close to 100% contact.

    Here we can see that the tang is mostly inlet and the crescent has about 50% contact. The geometry of the stock didn't quite match the supplied buttplate, so I heated it up at the midway point with an OA torch and re-bent the curvature to about 4 degrees less curvature. It's not noticeable with the eye, but does make a difference to the inletting as the stock height was already pre-determined on the duplicator at TOTW so I can only modify the plate, not add more wood.



    And now we are at 95%+ contact all around the perimeter of the buttplate Close enough.



    Drilled, countersunk, and screw dressed to match the buttplate profile:







    That should do nicely, and the buttplate is nicely supported all the way around to handle stout loads
    Союз нерушимый республик свободных Сплотила навеки Великая Русь. Да здравствует созданный волей народов Единый, могучий Советский Союз!

  15. #30
    Senior Moderator
    (Founding Partner)


    Site Founder
    Claven2's Avatar
    Join Date
    Oct 2006
    Last On
    08-09-2023 @ 10:17 PM
    Location
    Scandaltown, Ontario
    Posts
    3,242
    Real Name
    Ronald
    Local Date
    03-19-2024
    Local Time
    03:39 AM
    Thread Starter
    Cripes - I just realized I forgot to take photos of the toe cap, which I have inlet and dressed flush to the wood. Oh well, pics of it in the next instalment. I did take pics of the nosecap install though...

    Obviously, I have to feather the stock contour down to the nosecap, and I have started to, but I didn't take pics of that. The length is set so the nosecap is just behind the filets on the muzzle octagonal points. Inletting of this part is primarily done with small wood files and inletting black.



    It's held on with a small M3X0.5 screw I had to make by hand as the head needs to be really thin so as not to compromise the strength of the small stock tongue the nosecap is fastened to.


    Here you can see the fastening surface a little better:


    In reality, the inleting is done to about 80-85% contact, but you'll note at the base of the nosecap there is some gapping on either side of the nosecap. The gap is just up by the top of the inletting where the walls of wood are very thin. This is because I lost some of that paper-thin wood when I was filing the base true. In eny event, it's not visible when the rifle is assembled

    Союз нерушимый республик свободных Сплотила навеки Великая Русь. Да здравствует созданный волей народов Единый, могучий Советский Союз!

+ Reply to Thread
Page 3 of 7 FirstFirst 1 2 3 4 5 ... LastLast

Similar Threads

  1. Recommended gunsmith for building a NO 4 (T) reproduction?
    By rascal32 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 0
    Last Post: 11-01-2010, 09:30 PM
  2. Building a better mousetrap: The red rifle front sight tool.
    By Claven2 in forum Gunsmithing for Old Milsurps
    Replies: 1
    Last Post: 03-21-2010, 06:56 AM
  3. building a L42A1
    By J Tal in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 5
    Last Post: 02-17-2010, 01:48 AM
  4. Building a match #4
    By sdh1911 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 6
    Last Post: 12-14-2008, 02:32 PM
  5. Building a British arms collection
    By sdh1911 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 4
    Last Post: 11-18-2006, 06:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks