+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11

Thread: M1A1 Carbine!

Click here to increase the font size Click here to reduce the font size
  1. #1
    FREE MEMBER
    NO Posting or PM's Allowed
    Jmiller45's Avatar
    Join Date
    Nov 2010
    Last On
    11-14-2010 @ 01:45 PM
    Posts
    4
    Local Date
    03-28-2024
    Local Time
    03:14 PM

    M1A1 Carbine!

    Hello all,

    I have recently aquired an Inland M1A1icon Carbine Paratrooper. Until a few days ago I wasn't familiar with them at all. But I have spent the past few days reading, researching, and enjoying the history of these guns.

    I believe the carbine I have aquired to be an original Inland Carbine. The barrel reads Inland MFG. DIV. General Motors 6-44. The reciever also reads Inland MFG. DIV. Serial number
    530xxx2. The butt plate reads xx57614. It's kinda hard to read the first couple of digits. The upper handguards only have two rivets and I have read that makes it a WWII gun. IIRC.

    I have taken several photos and attached them in a link for your viewing pleasure. I believe i have come to the right place to hopefully learn a little more about my new found treasure! Any info you can share with me is greatly appreciated.

    Inland M1A1 Carbine pictures by jmiller556 - Photobucket

    Thank you,
    Jmiller45
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Senior Moderator
    (Milsurp Forums)
    Bill Hollinger's Avatar
    Join Date
    Mar 2009
    Last On
    Today @ 11:35 AM
    Location
    Pacific Northwest, Oregon
    Posts
    6,021
    Real Name
    Bill Hollinger
    Local Date
    03-28-2024
    Local Time
    02:14 PM
    Looks good so far. The stock looks to be real sans the grip. Looks as though it may have been refinished but with the picture you posted it is hard to tell. The cast but plate has a casting number not the same as the serial number.
    Bill Hollinger

    "We're surrounded, that simplifies our problem!"

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    FREE MEMBER
    NO Posting or PM's Allowed
    phil441's Avatar
    Join Date
    Mar 2009
    Last On
    02-15-2020 @ 12:37 AM
    Location
    North Central Texas
    Posts
    422
    Local Date
    03-28-2024
    Local Time
    03:14 PM
    Charlie-Painter and many others will correct me in a hurry if I'm wrong, but isn't the hand guard a Underwood?
    No big deal.
    A nice looking find!
    Last edited by phil441; 11-11-2010 at 10:34 PM.

  6. #4
    FREE MEMBER
    NO Posting or PM's Allowed
    phil441's Avatar
    Join Date
    Mar 2009
    Last On
    02-15-2020 @ 12:37 AM
    Location
    North Central Texas
    Posts
    422
    Local Date
    03-28-2024
    Local Time
    03:14 PM
    Actually, if you want to know what you have, it's time to start tearing it down and noting any and all markings. A simple field strip will get you started.
    How far you go is up to you.
    The good folks here will help you all the way.

  7. #5
    FREE MEMBER
    NO Posting or PM's Allowed
    Jmiller45's Avatar
    Join Date
    Nov 2010
    Last On
    11-14-2010 @ 01:45 PM
    Posts
    4
    Local Date
    03-28-2024
    Local Time
    03:14 PM
    Thread Starter
    Thanks guys. I'm going to tear it down and fill out the data sheet from The Carbine Club just as soon as I get some free time!

    I went to my daughters school tonight for their Verterans Day celebration. It was very nice and it is very neat owning a piece of history like this.

    Thank you to all Veterans!

  8. #6
    Advisory Panel
    painter777's Avatar
    Join Date
    Mar 2009
    Last On
    @
    Location
    Central Michigan
    Posts
    5,312
    Local Date
    03-28-2024
    Local Time
    05:14 PM
    Hand Guard marked P-U would have been used by Underwood. But sure looks like it's been on there a long time. Matches very closely.
    Very nice looking carbine...........
    Cheers,
    Charlie-painter777

  9. #7
    FREE MEMBER
    NO Posting or PM's Allowed
    Ramboueille's Avatar
    Join Date
    Aug 2008
    Last On
    @
    Posts
    356
    Local Date
    03-28-2024
    Local Time
    05:14 PM
    Quote Originally Posted by Jmiller45 View Post
    Thanks guys. I'm going to tear it down and fill out the data sheet from The Carbine Club just as soon as I get some free time!

    I went to my daughters school tonight for their Verterans Day celebration. It was very nice and it is very neat owning a piece of history like this.

    Thank you to all Veterans!
    J,

    Do NOT disassemble the bolt unless you have the tool used to reassemble it!

    The firing pin and extractor are usually marked but I don't think it's critical for what you need to know (for now).

  10. #8
    FREE MEMBER
    NO Posting or PM's Allowed
    manteo97's Avatar
    Join Date
    Apr 2008
    Last On
    01-14-2020 @ 06:44 PM
    Location
    Republic of Vancouver Island, BC
    Posts
    42
    Local Date
    03-28-2024
    Local Time
    04:14 PM
    Looks like you got a real find. 5.3 M s/n would be from the 2nd big lot of M1A1icon's, yours made June 1944, so barrel date works too. Your M1A1 stock should be a low wood, and the wire stock should be solid, not made from tube. Rnd bolt matches, should have "OI" or "AI" on left lug. May have numbers 1,2 or 3 too. Stamped sight is correct for this date.

    Handguard is not correct, should be an Inland 2-rivet, shallow groove, marked "OI" or "HI", OR 4-rivet marked "OI" if you want to restore back to correct as-issued. A best color match would be nice.

    You should fill out the CC data sheet, as there are some good experts on this site that can help you out.

  11. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    Jmiller45's Avatar
    Join Date
    Nov 2010
    Last On
    11-14-2010 @ 01:45 PM
    Posts
    4
    Local Date
    03-28-2024
    Local Time
    03:14 PM
    Thread Starter
    Thank you very much for the replies. I'm learning a lot.

  12. #10
    Legacy Member shadycon's Avatar
    Join Date
    Jun 2009
    Last On
    Today @ 09:02 AM
    Location
    NRV, Va.
    Posts
    773
    Real Name
    Gene Keller
    Local Date
    03-28-2024
    Local Time
    05:14 PM
    Very nice! If it were me I wouldn't change a thing. It looks to good to mess with. I had to restore mine, It was a basket case.
    M1a1's-R-FUN!!!!!!!!!!!!!!!!!!!!!!!!
    TSMG's-R-MORE FUN!!!!!!!!!!!!!
    ENJOY LIFE AND HAVE FUN!!!

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Stormin' Norman carried an M1A1 carbine in Vietnam
    By imarangemaster in forum M1/M2 Carbine
    Replies: 9
    Last Post: 07-27-2010, 08:31 PM
  2. Value of M1A1 Standard vs. M1A1 NRA Match
    By byronroland in forum M1 Garand/M14/M1A Rifles
    Replies: 4
    Last Post: 04-11-2010, 11:24 PM
  3. 1942 dated Inland M1A1 carbine. (Pics.)
    By drm2m in forum M1/M2 Carbine
    Replies: 17
    Last Post: 03-27-2009, 02:14 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks