+ Reply to Thread
Results 1 to 10 of 10

Thread: Ammo for Carcano mod. 91/41

Click here to increase the font size Click here to reduce the font size
  1. #1
    Legacy Member blackcat_attilio's Avatar
    Join Date
    Dec 2009
    Last On
    10-01-2020 @ 04:27 PM
    Location
    Northern Italy
    Age
    64
    Posts
    134
    Local Date
    03-29-2024
    Local Time
    12:05 PM

    Ammo for Carcano mod. 91/41

    Hello to you all!
    I'm here with 2 "easy" questions. My buddy for shooting wants to buy a Carcano mod. 91/41, but he said to be afraid 'cause he heared something "unpleasant" about ammo for such a rifle. Well, to be short his first fear is: which bullets use with a Carcano 91/41 in 6.5mm caliber, bore uniform-twist rifling ? The second point is: someone advised him to not use powder Vihtavuori N120 -absolutely NO- while someone said N140 is not the right powder for such a caliber. So, which powder to use?
    I hope among you all there is anybody keen in Carcano 91/41 and I (my buddy) hope in his help.
    In advance many thanks!
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

    Blackcat

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Age
    2010
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel smellie's Avatar
    Join Date
    Jan 2008
    Last On
    01-14-2019 @ 09:17 AM
    Location
    Virden, Man. Pop 3250, 4 miles from Wolverine's range!
    Posts
    632
    Local Date
    03-29-2024
    Local Time
    06:05 AM
    Marco, I think you will find that most armies tried to use a fairly fast-burning powder: less weight to transport, less dollars, pounds, lira, marks to spend, being that it all costs about the same to produce.

    I have a Carcano Model 41 and it is just wonderfully accurate. I am using the cheap (bulk-pack) Remington 140-grain flat-base pointed bullet in my rifle. This is actually a .264" diameter bullet, but the rifle likes it, so that is what I feed it; the correct Carcano bullet should be about .268", so my bullets are 1/10 of a millimetre too small. All I can say is that the rifle likes them.... and the rifle is the boss. I seat my bullets as closely as I can to the length of a factory Carcano round; I think this is important because these rifles all had very long throats.

    On this side of the Atlantic, the only maker to offer a correct Carcano bullet is Hornady. You are in Europe, though, and your neighbours in Serbia make proper Carcano bullets at the Prvi Partizan factory in Uzice.

    I do not know the Vihtavuori powders at all. We don't see them very much here and, when we do, they are very expensive. For a very mild load, I have used 28 grains of IMR-4198.

    I hope this is a bit of help.
    .

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Legacy Member bearhunter's Avatar
    Join Date
    Oct 2006
    Last On
    11-02-2020 @ 03:00 PM
    Location
    Okanogan, BC
    Posts
    509
    Local Date
    03-29-2024
    Local Time
    03:05 AM
    You don't mention which bullet weight you are planning on using. Smellie just gave you a good load. He's also very lucky that the .264in diameter bullets shoot well in his Carcano. They don't shoot well in mine and the bore is almost mint. It does however like the bulk Prive bullets I managed to pick up at a gun show.
    Personally, I don't like to use the faster powders. I like to use N-160 and H4831, for all weights. The bullets I have are 140 grain spitzer type. I use 35.0 grains of N160 over a standard primer. I get about 2150 fps (680M) per second with that load. 39 grains of H4831, gives almost identical performance. These loads are safe in my FAT 42 that was FTRed in 1947. My rifle, also has the gain twist barrel. Not that it makes any difference. Bullet diameter in mine makes all the difference in accuracy. These rifles can be amazingly accurate. They are also a lot stronger than most realise. Google P.O. Ackley's report on action strength tests. The mild loads used in the Carcano rifles was through choice, nothing to do with the strength or weakness of the actions.
    I like to shoot my Carcano. Bullet availability is the real problem. Reloadable brass can be a problem as well. I like the low recoil and sight picture as well.

  6. #4
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-29-2024
    Local Time
    06:05 AM
    There's some similar threads that have been started previously and some seem to be fairly long running. Do a tag search using "Carcano Ammuntion" or "Carcano". Also see the links to "Similar Threads" at the bottom of this page.

    One of the threads I started some time back is as follows:

    More 6.5 Carcano fun coming!
    Last edited by jmoore; 11-29-2010 at 11:59 AM.

  7. #5
    Legacy Member blackcat_attilio's Avatar
    Join Date
    Dec 2009
    Last On
    10-01-2020 @ 04:27 PM
    Location
    Northern Italy
    Age
    64
    Posts
    134
    Local Date
    03-29-2024
    Local Time
    12:05 PM
    Thread Starter
    In the behalf of my buddy I thank you all for all what above.
    What is common between on side of the pond and the other is: very difficult to find the bullets for such a rifle.
    Again many thanks to you all!

    Blackcat

  8. #6
    Advisory Panel smellie's Avatar
    Join Date
    Jan 2008
    Last On
    01-14-2019 @ 09:17 AM
    Location
    Virden, Man. Pop 3250, 4 miles from Wolverine's range!
    Posts
    632
    Local Date
    03-29-2024
    Local Time
    06:05 AM
    One thing I should mention is that, even though the thing is very accurate (1 inch at 100 yards: very, very good for a $56 rifle!), I have not shot my '41 all that much. I had proper Carcano bullets on order through a local shop for 4 years, but nothing ever arrived. Many Carcanos really NEED the .268" bullet; I was just very lucky that my rifle has a very tight bore, allowing me to use an undersize bullet and still obtain good results. Also, I think it likely that the flat base of the Remington bullet helps, as does the very quick powder which I was using: a fast pressure rise will give the bullet a solid "kick" on its base, forcing it to upset and fill the barrel, making for more accurate shooting.

    In Canadaicon, our best source for Carcano brass and bullets seems to be Trade-Ex in Montreal. This is 2000km away from where I live, about 3500km from where friend Bearhunter lives. This is a BIG country! The good part is that, for the first time in many years, we CAN get what we need for our rifles. Carcano values here have been held down for many years by the ammunition problem. I suspect that as more people discover that you CAN make ammunition for them, prices will rise..... and so will respect for this fine rifle.

    Our border with the USAicon is much harder to get things across, thanks to all the recent "security" laws. This means that our American friends will have, as their best source for Carcano brass and bullets, Graf's in Mexico, Missouri. They will ALSO enjoy prices not very much over half of what we pay for the same items. (I cry!)

    My rifle, as your friend's, has a constant-twist barrel. I was surprised to learn that there are some around which have gain-twist barrels - the specification called for a constant-twist barrel.

    I do agree with friend Bearhunter that the rifles are light, easy to use and the recoil is very mild. I have a female friend of the quite small variety who wants to learn to shoot. She will be learning with 2 revolvers and 3 rifles. The revolvers are a 1933 Enfield Number 2 Mark 1 and Smith & Wesson 10/200, both taking the .38 S&W cartridge, and the rifles she will be using will be a Cooey 39 and a Winchester 69A (both .22RF) and..... you guessed it....... a Carcano Model 41. My reasoning is simple: she is not very big, these are five VERY accurate guns..... and none of them kick hard enough to hurt her. I think that knocking over a few 200-metre falling plates will be a good confidence-builder for her.... and the Carcano 41 is definitely accurate enough to do that.

    I now HAVE a bag of the Serbian "Prvi Partizan" bullets. My Carcanos are due for a LOT of range time in the coming season!
    .
    Last edited by smellie; 11-30-2010 at 02:38 AM. Reason: add information for USA

  9. Thank You to smellie For This Useful Post:


  10. #7
    Legacy Member Vincent's Avatar
    Join Date
    Mar 2009
    Last On
    02-27-2020 @ 09:22 PM
    Location
    Texas
    Posts
    1,890
    Local Date
    03-29-2024
    Local Time
    04:05 AM
    I have also been using Prvi Partizan. Surprisingly good.

  11. #8
    Legacy Member bearhunter's Avatar
    Join Date
    Oct 2006
    Last On
    11-02-2020 @ 03:00 PM
    Location
    Okanogan, BC
    Posts
    509
    Local Date
    03-29-2024
    Local Time
    03:05 AM
    smellie, I realise my carcano is unique. It's the only one I've seen with a gain twist barrel on a long rifle. Seeing as it was it has an FTR date of 1947, makes it even more improbable. It's actually the main reason I picked the rifle. I bought it out of Harkley and Haywood, back in the day. I still remember that day, one of the hot and muggy spring days in 1070. I went in with $150 to spend. I had been to Lever Arms but didn' see anything that called to me. I walked out of H&H with the Carcano, an M1icon Carbine and a crate of 38/200 UKicon surplus. I also had an all matching Byf 43 P-08 on hold until I could get to a bank and get them some money. That was an expensive day. I spent close to $300 all told, very close to a month's wages. Considering how things have changed, that was quite expensive. Especially by todays prices. Considering their condition, the same firearms can easily be picked up for half that amount when converted to todays wages. Today, those firearms could easily be had for $1500, give or take. The ammunition, is now non existent in case lots. I still have that small wooden box and a couple of the paper cartridge boxes that held a dozen rounds that it was packed with.
    Getting back to the twist rate, I was under the impression that gain twist barrels were reserved for carbines.

    One thing I have been having a problem with from day one is finding clips. I have two and wouldn't mind picking up another half dozen or so.
    Last edited by bearhunter; 12-01-2010 at 02:02 AM.

  12. Thank You to bearhunter For This Useful Post:


  13. #9
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-29-2024
    Local Time
    06:05 AM
    Early rifles had the gain twist rifling, too. Actually, I don't think it was dropped until the 1941 model was introduced. Possibly some 1941s had barrels made on older equipment?

  14. The Following 2 Members Say Thank You to jmoore For This Useful Post:


  15. #10
    Legacy Member bearhunter's Avatar
    Join Date
    Oct 2006
    Last On
    11-02-2020 @ 03:00 PM
    Location
    Okanogan, BC
    Posts
    509
    Local Date
    03-29-2024
    Local Time
    03:05 AM
    Thanks jmoore. That's what makes my rifle unique IMHO. It has FAT42 on the barrel and a 1947 FTR date.

    Back in the day, when I bought it, Carcanos were thought of as junk by most. This one was in perfecte condition and had a gain twist barrel. I didn't know that by 1941, they weren't making gain twist barrels any more. That's whats so interesting about milsurps. There are so many possibilities. Seeing as the rifle was rebuilt in 1947, it was probably done with existing spares. That is the only reason I can think of that a rifle would have an early barrel as a replacement.

    To tell the truth, I was under the impression that only the little carbines had gain twist barrels.

+ Reply to Thread

Similar Threads

  1. Reloading the Carcano
    By Andy in forum Ammunition and Reloading for Old Milsurps
    Replies: 4
    Last Post: 07-29-2017, 03:33 PM
  2. 6.5 carcano
    By bvillars in forum Ammunition and Reloading for Old Milsurps
    Replies: 29
    Last Post: 11-27-2010, 07:04 PM
  3. Carcano M91/24.
    By A. F Medic in forum Italian Rifles
    Replies: 2
    Last Post: 09-28-2010, 05:38 PM
  4. Know where to find 7.35 Carcano ammo?
    By Badog in forum Ammunition and Reloading for Old Milsurps
    Replies: 6
    Last Post: 08-03-2010, 07:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks