+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: No.4 Mk.I(T) mfg.1944 with Scope No.32 Mk.I mfg. 1941/2: An odd pairing!

Click here to increase the font size Click here to reduce the font size
  1. #1
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-28-2024
    Local Time
    07:50 AM

    No.4 Mk.I(T) mfg.1944 with Scope No.32 Mk.I mfg. 1941/2: An odd pairing!

    As an offshoot of a previous thread or two, the most recent being:

    "NO32 Mk1 Scope (Opinions wanted)"
    https://www.milsurps.com/showthread.php?t=26828

    it was decided to create a new thread that would focus on a minor mystery that may only be a delusion!

    Having seen at least three examples (of which one is in "captivity") of an early to mid 1944 No.4 Mk.I(T) mated to a 1941 or 1942 No.32 Mk.I scope which are in rather more "used" condition than their rifle, I wondered if some of the early conversions (mostly Enfield built trials rifles) were retired and their scopes sent to H&H for use on new builds.

    Wild theory based on little data to be sure! However, how many Trials Rifles are there with their original scopes?

    So here are some photos of one example to tear to shreds! I can do more if needed!

    I'm hoping, however, that more examples will surface. Or maybe I'm just mad! Just feel free to jump in. Add data. Refute the entire idea. Have a big time.


    The scope box in question for the thread is on the lower right.

    You may recognize the two photos above from a previous thread that was involved in the marking of scope boxes. This box has had only the one rifle assigned!




    If you ever wondered if Holland and Holland refinished the receiver bodies, note the dressed area around the flush ends of the front pad screws. If it was a local touch up method it surely wasn't "cold blue" in a bottle! I wonder if the old "browning" or "rust bluing" method could be done to a localized area?

    For those wondering about the "X" mark under the front pad, I've only seen it on rifles w/ the original forestock and that have had the screws staked. I THOUGHT Captain Laidlericon had written something on the subject some time back but can't find reference to it now.



    LIGHTLY scratched on S/N. It's easy to understand why many were later remarked using impression stamps.



    Note the condition of the pad mating surfaces. It would be reasonable to assume this rifle saw very little field use!


    No signs of another scope number having been applied previously. And the "S51" means it was the stock installed at H&H.


    Sorry the photos aren't better. No access to the good camera right now.

    Link to the whole album:

    http://s20.photobucket.com/albums/b2...288/?start=all

    ---------- Post added at 08:50 PM ---------- Previous post was at 08:49 PM ----------

    Scope photos:

    ---------- Post added at 08:52 PM ---------- Previous post was at 08:50 PM ----------

    In a new separate post to make editing my mess easier!

    ---------- Post added at 08:55 PM ---------- Previous post was at 08:52 PM ----------

    Oh, well:














    Post-WWII rifle S/N addition to the bracket. Since it wasn't numbered to it's first rifle, we'll not likely know what it's first assignment was, UNLESS, there's a scopeless early "T" w/ it's original buttstock still attached that has "1990" on the wrist!

    More if you need 'em.
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.
    Last edited by jmoore; 12-01-2010 at 06:13 PM.

  2. The Following 2 Members Say Thank You to jmoore For This Useful Post:


  3. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  4. #2
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-28-2024
    Local Time
    07:50 AM
    Thread Starter
    Gonna be a BIG first post! Dang computers.

    The crate, unfortunately, has no markings linking it to the rest of the outfit. I thought it did. Sorry.










    Somebody thought enough of the crate to use it as a bullet splash barrier. Many fine pieces of lead embedded in the wood. Many more tiny "cuts" all over this area.

  5. Thank You to jmoore For This Useful Post:


  6. Avoid Ads - Become a Contributing Member - Click HERE
  7. #3
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,651
    Local Date
    03-28-2024
    Local Time
    04:50 AM
    Interesting.

    is there a rifle number on the tongue of the butt?

    It does look as though there hasn't been another scope number on the wrist of the butt.

    On the other hand, the bracket cap screws have been 'unstaked' and the rifle has obviously seen some work post-war with the pad screws being staked and the scope number put on the outside of the case.

    The brackets were numbered post-war as well if I remember what I've read correctly(?)
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  8. #4
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-28-2024
    Local Time
    07:50 AM
    Thread Starter
    I'm pretty sure the butt is numbered to the rifle, but I haven't pulled the stock in a number of years. If it WASN"T I'm sure I would have remembered, due too the odd nature of the beastie. Maybe it's time to do a pull-apart again.

    No, the wrist number is as you would expect. The wood is still a bit proud of the buttsocket, it's not dished out in that area from a previous number's obliteration, nothing suspicious.

    Pads inspected and staked when the number was added to the bracket? There's the proper "X" on the forestock under the front pad, too. Oddly, the rifle's S/N is vibropenciled on the butt socket. Usually, if they're "vibro'd" on, it's on the LH side wall betwenn the pads. Butt sockets usually have the S/N impression stamped on, many times in addition to the vibropencil on the side wall. (This only seems to apply to BSA rifles...)

    What scope number on the outside of the case? T'ain't nurn. Just the rifle S/N.

    Bracket numbers ARE post-WWII, as noted in my post. I've only one rifle with an un-numbered bracket!

  9. #5
    Advisory Panel Surpmil's Avatar
    Join Date
    Feb 2008
    Last On
    @
    Location
    West side
    Posts
    4,651
    Local Date
    03-28-2024
    Local Time
    04:50 AM
    Quote Originally Posted by jmoore View Post
    What scope number on the outside of the case? T'ain't nurn. Just the rifle S/N.
    I mispoke there.

    Interesting how the scope was 1941 and was changed to 1942. That perhaps gives us an idea when it was built.

    On the other hand, perhaps it had some defect during manufacture and was put aside for later rectification, which didn't get done for some time.
    “There are invisible rulers who control the destinies of millions. It is not generally realized to what extent the words and actions of our most influential public men are dictated by shrewd persons operating behind the scenes.”

    Edward Bernays, 1928

    Much changes, much remains the same.

  10. #6
    Advisory Panel Thunderbox's Avatar
    Join Date
    Dec 2008
    Last On
    01-10-2022 @ 02:07 PM
    Posts
    1,150
    Local Date
    03-28-2024
    Local Time
    11:50 AM
    Quote Originally Posted by jmoore View Post
    Oddly, the rifle's S/N is vibropenciled on the butt socket. Usually, if they're "vibro'd" on, it's on the LH side wall betwenn the pads. Butt sockets usually have the S/N impression stamped on, many times in addition to the vibropencil on the side wall. (This only seems to apply to BSA rifles...)
    I'd be about 95% certain that someone has (recently) renumbered the rifle to match the scope. The original rifle was probably 1942/3 production, hence the serial number with an "A" prefix. A 1944 rifle should be well up the alphabet - probably R, S, T or similar. Rifle looks far too "fresh" to match that scope; I find it inconceivable that a well-worn scope would be fitted to a mint rifle in service...

  11. #7
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-28-2024
    Local Time
    07:50 AM
    Thread Starter
    That's the whole conundrum! New rifles w/ older scopes. As stated, I've seen more than one.

    As for the rifle S/N, I'm sure I've a BSA that's 1944 w/ an "E" prefix.

  12. #8
    Advisory Panel Lance's Avatar
    Join Date
    Dec 2007
    Last On
    Today @ 04:51 AM
    Location
    New England, USA
    Posts
    660
    Real Name
    Lance
    Local Date
    03-28-2024
    Local Time
    07:50 AM
    The rifle is legit as the "A" series s/n in 1944; in 1945 they started with the "R" and "S" s/n blocks. The electropencil s/n is correct for '43-44 BSA rifles (see pic's below) and due to their light engraving, many were re-stamped later. The electropencil s/n on the upper sidewall I have on my '45 BSA's and possibly they are there on later '44's too. Since the butt is factory H&H and the scope can is matching I would put up two possible scenario's.

    One. The original rifle was damaged and a unfinished left over H&H converted rifle was chosen to be mated with the early Watson scope as the scope mount is a later production example and the scope pads are staked.

    Two. Due to the original "T" stamp on the receiver the scope was returned to H&H during early 1944 where it was added into the system again and issued a new mount. Why send it back to H&H?? No idea, remember they had the '44 dated Watson Mk I's they still sent out from the factory so re-issuing a '42 is not impossible.

    The history of this rifle is very interesting, thanks for sharing. I am envious as I "need" a '42 dated Watson for my collection with matching rifle. So if you tire of her let me know!!

  13. The Following 2 Members Say Thank You to Lance For This Useful Post:


  14. #9
    FREE MEMBER
    NO Posting or PM's Allowed
    CnRcollector's Avatar
    Join Date
    May 2007
    Last On
    09-20-2011 @ 07:56 AM
    Location
    York County, South Carolina, USA
    Posts
    19
    Local Date
    03-28-2024
    Local Time
    06:50 AM
    Did a double take when I saw that pic.

    AV3470 is my rifle! Rest of the markings are all "right as rain". Alas, I don't have the correct scope/bracket, but the wrist is stamped 9745, which points to an HBM. Co. Mk1.

  15. #10
    Advisory Panel Lance's Avatar
    Join Date
    Dec 2007
    Last On
    Today @ 04:51 AM
    Location
    New England, USA
    Posts
    660
    Real Name
    Lance
    Local Date
    03-28-2024
    Local Time
    07:50 AM
    Sorry about using your rifle! I have a copy of its markings with my rifle AV3602, which is '43 dated, and I copied it by mistake. Closest to you scope I have on record is 9731, I will keep an eye out.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Mk1 No 32 1941 sniper scope id and price!
    By AL71 in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 1
    Last Post: 06-20-2010, 08:17 AM
  2. No.4 Mk1(T) M.47 1944
    By Hambone in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 49
    Last Post: 04-21-2010, 04:33 PM
  3. is this large 6 x scope a ww2 k98 sniper scope
    By mil collect in forum Mauser Rifles
    Replies: 5
    Last Post: 03-29-2010, 03:00 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks