+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 12

Thread: Italian Carcano Bayonet

Click here to increase the font size Click here to reduce the font size
  1. #1
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Yesterday @ 09:10 PM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-29-2024
    Local Time
    02:01 AM

    Italian Carcano Bayonet

    I picked up a carcano bayonet off ebay that came yesterday. Can't seem to find much information on these at all. Condition is fair, it appears to have been arsenal refinished at some point. The blade has been blued but also shows signs of earlier pitting. It's stamped RB389 on the cross guard and has an R superimposed over a C on the blade. Has three small letters on the flat of the cross guard the first which I can't make out, the second and third are P and S. It has one other mark on the top of the handle metal that I can't make out.

    I'm just a casual collector trying to get one representative piece from each nation during the wars but would like to know a little of the history behind them. What little I could find on this seems to indicate that it is of WWI vintage due to the cross guard markings
    Information
    Warning: This is a relatively older thread
    This discussion is older than 360 days. Some information contained in it may no longer be current.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #2
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-29-2024
    Local Time
    08:01 AM

    Pics needed for identification!

    Quote Originally Posted by Aragorn243 View Post
    I picked up a carcano bayonet
    Sorry Aragorn, but that is like saying "I have an Enfield bayonet" - there is just not enough information for identification. Pics are needed!


  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #3
    Advisory Panel browningautorifle's Avatar
    Join Date
    Jul 2008
    Last On
    Today @ 12:49 AM
    Location
    Victoria BC
    Posts
    29,839
    Real Name
    Jim
    Local Date
    03-28-2024
    Local Time
    11:01 PM
    You could cross reference your bayonet with pics from Carl Smith's site BAyonet Collection Presentation.
    Regards, Jim

  6. #4
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Yesterday @ 09:10 PM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-29-2024
    Local Time
    02:01 AM
    Thread Starter

    Aragorn

    Sorry, I know what it is. It's an M1891, common version. I'm just curious about whether the markings identify where it was made. I can't find any sites that list makers marks.

  7. #5
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-29-2024
    Local Time
    08:01 AM
    You may be misreading the markings. Please post pictures!

    [COLOR="Silver"]

    [

  8. #6
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Yesterday @ 09:10 PM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-29-2024
    Local Time
    02:01 AM
    Thread Starter
    Photos:








  9. Thank You to Aragorn243 For This Useful Post:


  10. #7
    Legacy Member gew8805's Avatar
    Join Date
    Dec 2008
    Last On
    07-19-2022 @ 08:59 AM
    Location
    Virginia
    Posts
    578
    Local Date
    03-29-2024
    Local Time
    02:01 AM
    The marking on the crossguard is probably the serial number of the rifle it was originally issued with, however it could also be a regimental marking. The mark on the ricasso is the manufacturer but I have not been able to locate the one shown. A great site for information on the Carcano rifle and it's variations, markings and accoutrements is the Italianicon language "Il 91". Here is a link, hopefully it will be shown with the Google translation to English:

    Google Translate

    Click on the blue letters and it will take you in. For in index to everything else on the site, including "Baionette" section, also translated, see the left hand column.
    Last edited by gew8805; 12-31-2010 at 10:15 AM.

  11. Thank You to gew8805 For This Useful Post:


  12. #8
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Yesterday @ 09:10 PM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-29-2024
    Local Time
    02:01 AM
    Thread Starter
    Thanks for the link, very informative but unfortunately doesn't show the makers mark of the one that I have.

  13. #9
    Advisory Panel Patrick Chadwick's Avatar
    Join Date
    Sep 2008
    Last On
    06-25-2023 @ 06:36 AM
    Location
    Germany
    Posts
    5,032
    Local Date
    03-29-2024
    Local Time
    08:01 AM

    Carcano M91/41 bayonet, circa 1941

    Ok, now we are getting somewhere!

    Aragorn, please position your baxonet with the hilt up and the blade down.
    Now take another look at the marking on the ricasso:
    That looks like an R superimposed, and slightly above a C. This is the monogram for the manufacturer ROCCA. CORRECTION Renato Castelli, not Rocca, see later posting!ROCCA made M91 bayonets in WWII for use with the M91/41

    On the crosspiece, beteween the muzzle ring and the grip, we see a clear PS.
    This is a stamp from the component supplier PS (full name unknown), also known as a supplier of parts in WWII, in particular bayonets, up to 1942.
    The mark in front of that bothers me. It could be a worn or badly struck O (letter) or 0 (number). Either way, it lines up so badly with the PS, that I doubt it is a part of the PS stamp. Is thare any trace of further numbers in front of that - it could be the remains of a year stamp "1940".


    The M91 bayonet was produced in quantity from 1940 on, and used both for the M91 and the M91/41. Bring it round to my place, and we'll see if it fits on "Roma". OK, not a realistic suggestion! But maybe you will come across an M91/41 somewhere.

    On the crosspiece, the RB 389** would have been a matrix number back in WWI, with the format A xxxx or AB xxxx as previously described in identifying a Carcano on the General Discussion forum. But in WWII this system seems to have broken down, certainly for accessories, and the marking on the cross piece was often a manufacturers name (batch?)/number stamp. It is not a regimental marking - the Italians did not use a regimental marking system.

    From the pics, the blade seems to have been blued. If original, that would date it to 1941 or later. Later still, a parkerisation was used.

    My best guess: an M91 bayonet from ROCCA, I]CORRECTION Renato Castelli, not Rocca, see later posting![/I]made in 1941 (possibly 1942) from parts from more than one supplier (i.e. whatever was in the bin), probably for use with an M91/41.

    Other informed guesses welcomed!



    P.S. **I have found Rxxx and RFxxxx, both recorded for FAT/Terni on M91/41s made in 1941. But no trace of a manufacturer RB. So maybe RB 389 is a matrix number after all.

    P.P.S. For those who do not know what a matrix number is. The matrix number was the master record number for the rifle (and in this case, maybe for the bayonet issued with it) from a block assigned to a particular arsenal/factory. This was not a regimental number - it was supposed to be invariant, wherever the rifle ended up.
    Last edited by Patrick Chadwick; 01-02-2011 at 06:14 AM. Reason: Identification error:

  14. Thank You to Patrick Chadwick For This Useful Post:


  15. #10
    Contributing Member Aragorn243's Avatar
    Join Date
    Apr 2009
    Last On
    Yesterday @ 09:10 PM
    Location
    Pennsylvania, United States
    Posts
    6,974
    Real Name
    Steve
    Local Date
    03-29-2024
    Local Time
    02:01 AM
    Thread Starter
    Patrick,

    I've seen ROCCA WWII produced bayonets for production year 1941, 1942 and 1943. They are marked ROCCA with the date stamp on the crosspiece with no mark on the ricasso. The bluing appears to be a post war refurbishment, whether this was post WWI or post WWII I have no idea. It does have old pitting in spots on the blade. RC being the monogram for ROCCA makes sense but it doesn't match known examples.

+ Reply to Thread
Page 1 of 2 1 2 LastLast

Similar Threads

  1. Italian M1D? no pics
    By GUTS in forum M1 Garand/M14/M1A Rifles
    Replies: 3
    Last Post: 10-29-2012, 05:13 AM
  2. Wanted info on Italian Carcano rifles
    By RBruce in forum Italian Rifles
    Replies: 6
    Last Post: 08-05-2010, 04:01 PM
  3. Italian Gun Collector
    By A. F Medic in forum Italian Rifles
    Replies: 0
    Last Post: 08-04-2010, 09:49 PM
  4. Need Spring for Italian M38 Folding Bayonet
    By cquickel in forum Edged Weapons Forum
    Replies: 0
    Last Post: 05-15-2009, 02:31 PM
  5. Is This Italian Walnut?
    By MIL rifle1 in forum Krag Rifles
    Replies: 4
    Last Post: 05-15-2009, 06:42 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks