+ Reply to Thread
Page 2 of 4 FirstFirst 1 2 3 4 LastLast
Results 11 to 20 of 36

Thread: Long Branch Experimental Serial # EX2 ....

Click here to increase the font size Click here to reduce the font size
  1. #11
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-28-2024
    Local Time
    07:19 PM
    Note the two shallow, angled machine tool marks on the left hand side of both action bodies, about ~3" ahead of the ejector screw. Pretty distinctive. It surely indicates the example shown by Badger hasn't been "scrubbed clean" of markings. The flats just to the rear of the receiver rings appears to be pretty close in texture, depth and profile, too.

    The finish seems distinctive, somehow, as well.

    However, the two butt sockets appear quite different in detail- at least on the left side. Oddly, the finish on EX 11 seems to have had more "clean-up" than E-X 2's in this region.

    Done gone plumb 'nerd" on y'all , I reckon! Sorry- it does nothing to define their historical import...

    ETA:Oy, buffdog, what's the date of the article?
    Last edited by jmoore; 05-27-2011 at 03:50 PM.

  2. # ADS
    Friends and Sponsors
    Join Date
    October 2006
    Location
    Milsurps.Com
    Posts
    All Threads
    A Collector's View - The SMLE Short Magazine Lee Enfield 1903-1989. It is 300 8.5x11 inch pages with 1,000+ photo’s, most in color, and each book is serial-numbered.  Covering the SMLE from 1903 to the end of production in India in 1989 it looks at how each model differs and manufacturer differences from a collecting point of view along with the major accessories that could be attached to the rifle. For the record this is not a moneymaker, I hope just to break even, eventually, at $80/book plus shipping.  In the USA shipping is $5.00 for media mail.  I will accept PayPal, Zelle, MO and good old checks (and cash if you want to stop by for a tour!).  CLICK BANNER to send me a PM for International pricing and shipping. Manufacturer of various vintage rifle scopes for the 1903 such as our M73G4 (reproduction of the Weaver 330C) and Malcolm 8X Gen II (Unertl reproduction). Several of our scopes are used in the CMP Vintage Sniper competition on top of 1903 rifles. Brian Dick ... BDL Ltd. - Specializing in British and Commonwealth weapons Specializing in premium ammunition and reloading components. Your source for the finest in High Power Competition Gear. Here at T-bones Shipwrighting we specialise in vintage service rifle: re-barrelling, bedding, repairs, modifications and accurizing. We also provide importation services for firearms, parts and weapons, for both private or commercial businesses.
     

  3. #12
    FREE MEMBER
    NO Posting or PM's Allowed
    buffdog's Avatar
    Join Date
    Apr 2008
    Last On
    12-02-2013 @ 11:01 AM
    Location
    Manitoba, Canada
    Posts
    191
    Local Date
    03-28-2024
    Local Time
    05:19 PM

    Date of Article

    The date was late 1941. I will see if I can find it again. Hamilton Spectator newspaper, Hamilton, Ontario, Canadaicon.
    .

  4. Avoid Ads - Become a Contributing Member - Click HERE
  5. #13
    Advisory Panel Thunderbox's Avatar
    Join Date
    Dec 2008
    Last On
    01-10-2022 @ 02:07 PM
    Posts
    1,150
    Local Date
    03-28-2024
    Local Time
    11:19 PM
    My own view is that the "EX" marks were added some time after the receivers were made: the receivers are well-finished (at least EX11, which I examined in some detail), whereas the EX marks are roughly struck. I'd guess that the receivers were pilot production or gauging samples from the (then) new Long Branch production line, and that they were initially stored or held as reference samples. Later on, they would have provided a convenient pool of top-quality receivers suitable for use as test-beds in trials or experiments.

  6. Thank You to Thunderbox For This Useful Post:


  7. #14
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-28-2024
    Local Time
    07:19 PM
    Does anyone have a photo of the milled flat just behind the barrel reinforce ring LH side on a Long Branch "0L" or "1L" (pre- Mk.1*) series rifle?

    That area looks a lot different on 3L2888.

    Complete tooling change (Probably cam driven profiler) would be VERY odd, this early on. Toolroom preproduction samples or ??? seem quite likely, as Thunderbox and Peter Laidlericon surmise above.
    Last edited by jmoore; 05-30-2011 at 08:01 AM.

  8. #15
    Administrator

    Site Owner
    Badger's Avatar
    Join Date
    Oct 2006
    Last On
    @
    Location
    Toronto, Canada
    Age
    75
    Posts
    12,941
    Real Name
    Doug
    Local Date
    03-28-2024
    Local Time
    07:19 PM
    Thread Starter
    My Videos in Video Club
    12
    Check the MKLicon under Canadaicon

    1941 No.4 Mk1 Long Branch Rifle (click here)

    (Click PIC to Enlarge)

    (Click PIC to Enlarge)


    Regards,
    Doug

  9. Thank You to Badger For This Useful Post:


  10. #16
    Advisory Panel

    jmoore's Avatar
    Join Date
    Mar 2009
    Last On
    06-09-2023 @ 04:20 AM
    Location
    US of A
    Posts
    7,066
    Local Date
    03-28-2024
    Local Time
    07:19 PM






    Closer! Guess it's time to photog 3L2888.

    Clues, need more clues. Forestocks ought to come off for a look see for inspectors' marks or other distinctive cuts that would be telling.

    When we were doing P40 resurrections we had hundreds for factory photos that would interst no one but those building them. Need a machinists eye view of production tools here, too! It's all in the tooling.

    (Garands are kind of the same- they changed methods as they gained experience- sometimes pretty dramatically. E.g. Ganged horizontal milling cutters to broaches.)
    Last edited by jmoore; 05-30-2011 at 09:26 AM.

  11. #17
    Advisory Panel
    Peter Laidler's Avatar
    Join Date
    Jul 2008
    Last On
    03-24-2024 @ 09:52 AM
    Location
    Abingdon, Oxfordshire. The home of MG Cars
    Posts
    16,507
    Real Name
    Peter Laidler
    Local Date
    03-29-2024
    Local Time
    01:19 AM
    You can see the same with Daimler Bren gun bodies too JM. Downcut milling against up cut - even when the cutters desperately need changing! I saw one recently where from the dire state of the cut finish, the poor machine must have been crying out for the tool setter to come along

  12. #18
    Advisory Panel
    Ian Skennerton's Avatar
    Join Date
    Sep 2010
    Last On
    05-05-2020 @ 12:47 AM
    Location
    Gold Coast, Queensland
    Posts
    66
    Local Date
    03-29-2024
    Local Time
    09:19 AM

    More grist to the mill...

    Life would certainly be dull if one knew everything!
    Rather than trying to fit the item into a particular pigeon hole, we should consider all relevant information and the photos first, before coming to a conclusion.
    In my opinion, the most pertinent posts from Peter Laidlericon, Thunderbox and Buffdog to Badger's observations.
    1. EX (why should it be considered experimental, and then draw features to explain it?). There does not seem to be anything experimental there.
    2. EX 11 is BNP (British Nitro Proof) marked, thus exported out of Englandicon post-war.
    3. EX 2 (and to a lesser extent EX 11) has early features... Mk I action, Mk I (Singer) rearsight, original style safety lever, 'button' cocking piece, magazine & trigger guard.
    4. EX 2 does not appear to have Long Branch factory, year & mark designation on the left wall of the action body.
    5. Wood on EX 11 is certainly a show grade but there is little doubt that the butt extension & aperture plate mod. were post disposal.
    6. EX 2 butt marking disc has chamfered edges, like a presentation or sample specimen.
    7. Was the top of the safety lever on EX 11 removed post disposal, or was that original?
    8. Early Canadianicon timber, early brass buttplates.

    So what can we assume from the above (there would be more likely if we had closer shots of EX 2)?
    a. Early production of both rifles, even earlier apparent for EX 2.
    b. EX 11 has been to England and back.
    c. More likely exhibition models or show examples than experimentals.
    d. Both rifles show post-disposal use, from wear marks on the stock of EX 2 and rifle range swivel, extended butt & plate fitting for EX 11.
    e. From the fittings, EX 2 is likely earlier date production than EX 11. Why does the EX prefix necessarily make them from the same batch?

    I would offer an opinion from the above that they are not experimental models, rather show or exhibition specimens. From memory, there are one or two EX prefix rifles in the Faris collection although I would need to dig through lots of old notes to see if they are relevant.

    One thing is for certain, the more one learns, the more we realise that we don't know.
    Ian

  13. The Following 6 Members Say Thank You to Ian Skennerton For This Useful Post:


  14. #19
    Legacy Member 8udr's Avatar
    Join Date
    Jul 2009
    Last On
    11-24-2021 @ 04:31 AM
    Location
    Northern Ireland
    Posts
    46
    Local Date
    03-29-2024
    Local Time
    12:19 AM
    "It's a lovely rifle and has a .303 magazine cleverly modified internally to feed 7.62 rounds. "

    Brian do you have a picture or description. Slightly off topic but very interesting all the same.

  15. #20
    FREE MEMBER
    NO Posting or PM's Allowed
    Longshaor's Avatar
    Join Date
    Oct 2009
    Last On
    04-18-2019 @ 09:38 PM
    Location
    State of Denial
    Posts
    248
    Local Date
    03-28-2024
    Local Time
    07:19 PM

    Not to hijack the thread but...

    I have a question about the "oil-burnt" finish on Thunderbox's rifle EX11. How is this finish done? I've tried searching it on the internet and all I've found is burnt oil finishes for metal, not wood. Any help would be greatly appreciated.

    Cheers!

+ Reply to Thread
Page 2 of 4 FirstFirst 1 2 3 4 LastLast

Similar Threads

  1. Long Branch serial number listing
    By limpetmine in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 361
    Last Post: 08-21-2023, 03:23 PM
  2. 1943-44 Enfield No.4 Mk1* Experimental Long Branch 'Scout' Sniper Rifle
    By Badger in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 6
    Last Post: 05-01-2011, 05:44 AM
  3. Long Branch serial number locations?
    By Schwehn in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 6
    Last Post: 02-07-2011, 10:35 AM
  4. New Long Branch serial number update posted
    By limpetmine in forum The Lee Enfield Knowledge Library Collectors Forum
    Replies: 9
    Last Post: 12-27-2009, 10:48 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Raven Rocks